Reliability Report (Q2014-002) LIA135/LIA136 Product Qualification Optically Isolated Amplifier October 1, 2015 IXYS Integrated Circuits Division 78 Cherry Hill Drive, Beverly, MA 01915 www.ixysic.com LIA135/LIA136 Optically Isolated Amplifier Summary The LIA135 and LIA136 products have successfully passed IXYS ICD’s requirements for product qualification. Table 1: Device Information Product Number Package Type Assembly Site Test Site LIA135, LIA136 8L DIP Atec, Laguna, Philippines IXYS ICD BEV, Beverly, MA, USA Table 2: Reliability Test Result Stress Test HTRB HAST Thermal Shock Temperature Cycle Hot Storage MSL Stress Conditions 125°C, 80% WVDC, 1000 hrs 130°C, 85%, 18.8PSI, 96 hrs 0 to 100°C, 10/10 dwells, 15 cycles -55 to 125°C, 10/10 dwells, 300 cycles 125C, 1000 hrs IR Reflow, Level 1 Product/ Applicable Specs Package Mil-Std-883 LIA135/ M1005 TE3524 JESD22-A-108 LIA135/ Sample # of Size (SS) Failures 105 0 112 0 105 0 77 0 80 0 55 0 Mil-Std-883, M1011 TE3500 LIA136/ TE3513 LIA135/ TE3458 LIA136/ TE3483 LIA135/ TE3458 Mil-Std-883, M1010, “B” LIA135/ TE3458 55 0 JESD22-A103-C LIA135/ TE3458 LIA135/ TE3500 LIA135/ TE3524 LIA135/ TE3525 LIA136/ TE3513 LIA135/ TE3458 50 0 50 0 50 0 50 0 50 0 50 0 JESD22A110-C J-STD-020D.1 IXYS Integrated Circuits Division, Beverly, MA, USA Report# Q2014-004 Page 2 of 4 LIA135/LIA136 Optically Isolated Amplifier Table 3: ESD Results – 8-Pin DIP Stress Test Stress Conditions HBM All Pins, 1.5kΩ, 100pF Applicable Specs Product/ Package Highest Passed Class JESD22A114-E LIA135/ TE3458 +/-2000V 2 LIA136/ TE3483 +/-2000V 2 Table 4: FIT Rate Summary Qual Lot # 1 Stress Test HTRB # of Devices 322 1 HAST 157 # of Fail 0 Hours Tested 1000 Equivalent Dev. Hours 82,240,721 0 96 17,839,281 FIT Rate @ 60% CL 11.19* 51.57** * HTRB FIT Rate was calculated based on the Acceleration Factor (AF) and equivalent device hours at 0.7eV of activation energy at 125°C test temperature and 40°C use temperature. ** HAST FIT Rate was calculated based on the Acceleration Factor (AF) and equivalent device hours at 0.7eV of activation energy at 130°C test temperature and 40°C use temperature. IXYS Integrated Circuits Division, Beverly, MA, USA Report# Q2014-004 Page 3 of 4 LIA135/LIA136 Optically Isolated Amplifier Approvals Prepared by: _Martha W, Brandt*_________________________________10/1/15__ Martha W. Brandt Date Quality Engineer Approved by: _George Belezos*___________________________________10/1/15__ George Belezos Date Quality Manager Approved by: _James Archibald*___________________________________10/1/15__ James Archibald Date Director of Engineering *Signature on File IXYS Integrated Circuits Division, Beverly, MA, USA Report# Q2014-004 Page 4 of 4