Specification AXE10LN Oscillator type: Low Phase Noise

Designed and
Manufactured
in Germany
Specification
Oscillator type:
Rev.: 2
Date: 2014-04-04
AXE10LN
Low Phase Noise SMD SPXO with HCMOS Output
Parameter
min.
10
Frequency range
Frequency stability
Initial tolerance
vs. operating temperature range
vs. supply voltage variation
vs. load change
st
Long term (aging) 1 year
Frequency adjustment range
Electronic Frequency Control (EFC)
RF output
Signal waveform
Load
Rise & decay time
Symmetry (duty cycle)
Start-up time
Phase noise @ 100 MHz
(Note 3)
Supply voltage VS
Unit
Condition
165
MHz
ppm
ppm
ppm
ppm
ppm
ppm
VS ±5%
Load ±5%
@ 40°C
ppm
on request
N.A.
HCMOS
15
5
60
4
40
3.15
4.75
Enclosure (see drawing)
Weight
Packing
3.
max.
±5
±5
±0.5
±0.5
±1
Current consumption (steady state)
Operating temperature range
Notes:
1.
2.
typ.
-95
-125
-150
-155
-160
3.3
5.0
0
3.45
5.25
30
+50
14.4x9.5x6.0 max.
pF
ns
%
ms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
V
V
mA
°C
mm
g
2
Tape & Reel
@ VS/2
10 Hz
100 Hz
1 kHz
10 kHz
≥100 kHz
Option = „33“
Option = „50“
@ +25°C
(Note 2)
IEC 61837 CO 27
IEC 60286-3
Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
Other temperature range and stabilities on request
Phase noise at other frequencies on request
Absolute Maximum Ratings
Parameter
min.
max.
Supply Voltage VS
Storage Temperature
-0.5
-55
VS + 10%
+125
Unit
Condition
V
°C
VS to GND
Ordering Code
Option
Revision
[Supply Voltage]
AXE10LN
50
Rev.2
Example: AXE10LN-50_Rev.2 – 100.000 MHz
Model
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
Frequency [MHz]
100.000
AXE10LN Rev.2
Drawing D0
Page 1(3)
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]
Designed and
Manufactured
in Germany
Enclosure drawing
Pin connections
Pin #
1
2
3
4
5
6
Symbol
N.C.
N.C.
GND
RF OUT
N.C.
Vs
Function
No Connection
No Connection
Ground
RF Output
No Connection
Supply Voltage
Handling and Testing
Parameter
Procedure
Handling and Testing
Processing
Parameter
Application Note AXAN-011
Application Note AXAN-012
Procedure
Electrostatic discharge (ESD)
THD devices
SMD devices
Washable
RoHS compliant
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
IEC60749-26
IEC60749-27
Yes
Yes
AXE10LN Rev.2
Drawing D0
Page 2(3)
HBM
MM
No
No
Source
www.axtal.com
www.axtal.com
Condition
2000 V
200 V
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]
Designed and
Manufactured
in Germany
Environmental conditions
Test
Sealing tests
(if applicable)
Solderability
Resistance to
soldering heat
Shock*
IEC
60068
Part …
2-17
IEC
60679-1
Clause
5.6.2
MIL-STD202G
Method
112E
2-20
2-58
5.6.3
208H
210F
2-27
5.6.8
213B
Vibration,
2-6
5.6.7.1
201A
sinusoidal*
204D
Vibration,
2-64
5.6.7.3
214A
random*
Endurance tests
108A
- ageing
5.7.1
- extended aging
5.7.2
Other environmental conditions on request
MIL-STD810F
Method
MIL-PRF55310D
Clause
3.6.1.2
3.6.52
3.6.48
516.4
3.6.40
516.4-4
3.6.38.1
3.6.38.2
3.6.38.3
3.6.38.4
514.5
4.8.35
Test conditions (IEC)
Gross leak: Test Qc,
Fine leak: Test Qk
Test Ta Method 1
Test Td1 Method 2
Test Td2 Method 2
Test Ea, 3 x per axes 100g,
6 ms half-sine pulse
Test Fc, 30 min per axes,
10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g
Test Fdb
30 days @ 85°C, OCXO @25°C
1000h, 2000h, 8000h @85°C
Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice.
Revision History
Rev.
Drawing
Date
[dd.mm.yyyy]
1
2
D0
D0
01.10.2012
04.04.2014
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
Remarks
First issue
Stability parameters updated, 100 MHz phase noise added,
environmental conditions updated, editorial changes
AXE10LN Rev.2
Drawing D0
Page 3(3)
Author
Checked
BN
HH
BN
HH
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: [email protected]