FieldLab EC Certificate of Conformity

1.
EC TYPE EXAMINATION CERTIFICATE
2.
Equipment or Protective System Intended for use in Potentially
Explosive Atmospheres Directive 94/9/EC
3.
EC Type Examination Certificate
Number:
ITS14ATEX27973
4.
Equipment or Protective System:
Pressure FieldLab, model FLP1
5.
Manufacturer:
Ralston Instruments LLC
6.
Address:
15035 Cross Creek Parkway
Newbury, OH 44065 USA
7.
This equipment or protective system and any acceptable variation thereto is specified in the schedule to this
certificate and the documents therein referred to.
8.
Intertek Testing and Certification Limited certifies that this equipment or protective system has been found to
comply with the Essential Health and Safety Requirements relating to the design and construction of
equipment and protective systems intended for use in potentially explosive atmospheres given in Annex II to
the Directive 94/9/EC of 23 March 1994
The examination and test results are recorded in confidential Intertek Report 101784734BOX-006e-h, dated
August 5, 2015.
9.
Compliance with the Essential Health and Safety Requirements has been assured by compliance with
standards EN 60079-0:2012, EN 60079-11:2012, EN 60079-26:2007 except in respect of those
requirements referred to at item 16 of the Schedule.
10.
If the sign “X” is placed after the certificate number, it indicates that the equipment or protective system is
subject to special conditions for safe use specified in the schedule to this certificate.
11.
This EC Type examination certificate relates only to the design, examination and tests of the specified
equipment or protective system in accordance to the directive 94/9/EC. Further requirements of the
Directive apply to the manufacturing process and supply of this equipment or protective system. These are
not covered by this certificate.
12.
The marking of the equipment or protective system shall include the following:-
II 1 G Ex ia IIC T4 Ga
-10°C ≤ Ta ≤ 50°C; IP67
__________________________
Intertek Testing & Certification Limited
Ryan Parks, P.E.
Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB
Certification Officer
Tel: +44 (0)1372 370900 Fax: +44 (0)1372 370977
September 17, 2015
www.intertek.com
Registered No 3272281 Registered Office: Academy Place, 1-9 Brook Street, Brentwood, Essex, CM14 5NQ.
This certificate may only be reproduced in its entirety and without any change, schedule included and is subject to Intertek Testing
and Certification’s Conditions for Granting Certification.
Sheet 1 of 3
ExF-301 - Type examination certificate
Template Revision 4
RFT-EU-NB-OP-23l1 5-23-14
SCHEDULE
EC TYPE EXAMINATION CERTIFICATE NUMBER ITS14ATEX27973
13.
Description of Equipment or Protective System
The FLP1 Pressure FieldLab is a digital pressure gauge and is powered by an internal battery pack and
contains a total of seven printed circuit boards including a Main Controller Board, Battery Protector Board,
External Power Board, optional RF Board, Keypad Interface Board, USB Board, LCD Controller Board and
Pressure Sensor.
Power to the Main Controller Board is supplied from the battery pack which contains the Battery Protector
Board. There is also an External Power Board that connects to the Main Controller Board to charge the
battery pack. The battery pack may be re-charged by either an AC/DC supply that outputs 15 V or a DC
supply from a car charger that outputs up to 14.4 V. The chargers are not included in the scope of this
investigation. The instructions state that the product is not to be charged in a hazardous location. When the
unit is powered from an external source, a Um of 21 V applies to the Power input terminals. There is also a
USB input which is not to be used in a hazardous location. When the USB connection is employed a Um of
5.25 V applies to the USB input terminals.
3.7 V Lithium Ion Battery; Um = 21 V (Power); Um = 5.25 V (USB)
14.
Report Number
Intertek Report Ref: 101784734BOX-006e-h, Issue 0, dated August 5, 2015.
15.
Conditions of Certification
(a). Special Conditions for safe use
N/A
(b). Conditions of Manufacture
N/A
16.
Essential Health and Safety Requirements (EHSR’s)
The relevant EHSR’s have been identified and assessed in Intertek Report Ref: 101784734BOX-006e-h,
Issue 0, dated August 5, 2015
Intertek Testing & Certification Limited
Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB
Tel: + 44 (0)1372 370900 Fax: +44 (0)1372 370977
www.intertek.com
Registered No 3272281 Registered Office: Academy Place, 1-9 Brook Street, Brentwood, Essex, CM14 5NQ.
This Certificate is the property of Intertek Testing and Certification Ltd and is subject to Intertek Testing and Certification’s Conditions
for Granting Certification.
Sheet 2 of 3
ExF-301 - Type examination certificate
Template Revision 4
RFT-EU-NB-OP-23l1 5-23-14
SCHEDULE
EC TYPE EXAMINATION CERTIFICATE NUMBER ITS14ATEX27973
17.
Drawings and Documents
Title
Drawing No.:
Rev. Level:
FLP1 REAR NAMEPLATE
DGAU-0315
5
8/20/2015
Date:
FLP1 HAZARDOUS LOCATION INSTRUCTIONS
DGAU-0323
0
8/3/2015
TRANSDUCER ASSEMBLY
DGAU-0342
0
6/26/2015
TRANSDUCER ASSEMBLY
DGAU-0343
0
6/26/2015
BATTERY ASSEMBLY
DGAU-0345
0
7/17/2015
LCD ASSEMBLY
DGAU-0346
0
7/17/2015
WIFI PCB
DGAU-0347
0
7/17/2015
BOARD, MAIN
DGAU-0348
0
7/17/2015
BOARD, POWER
DGAU-0349
0
7/17/2015
BOARD, USB
DGAU-0350
0
7/17/2015
BOARD, LCD CONTROLLER
DGAU-0351
0
7/17/2015
KEYPAD TAIL
DGAU-0352
0
6/29/2015
CIRCUIT BOARD, BATTERY
DGAU-0353
0
7/17/2015
FLP1 DIGITAL PRESSURE DEVICE FULL ASSEMBLY
DGAU-0354
0
7/17/2015
FRONT HOUSING/EMI ASSEMBLY
DGAU-0355
0
7/16/2015
KEYPAD
DGAU-0356
0
7/16/2015
REAR HOUSING/EMI ASSEMBLY
DGAU-0357
0
7/16/2015
CAP, STANDARD ASSEMBLY
DGAU-0358
0
7/16/2015
WIFI CAP, ASSEMBLY
DGAU-0359
0
7/16/2015
FIELDLAB MAIN SEALING O-RING
DGAU-0360
0
7/23/2015
BOARDS, ASSEMBLY
DGAU-0361
0
7/16/2015
FIELDLAB RF MODULE AND BLANK CAP SEAL
DGAU-0362
0
7/17/2015
This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its
Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no
liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by
the use of this Certificate. Only the Client is authorized to permit copying or distribution of this Certificate and then only in its
entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service
must first be approved in writing by Intertek.
Intertek Testing & Certification Limited
Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB
Tel: + 44 (0)1372 370900 Fax: +44 (0)1372 370977
www.intertek.com
Registered No 3272281 Registered Office: Academy Place, 1-9 Brook Street, Brentwood, Essex, CM14 5NQ.
This Certificate is the property of Intertek Testing and Certification Ltd and is subject to Intertek Testing and Certification’s Conditions
for Granting Certification.
Sheet 3 of 3
ExF-301 - Type examination certificate
Template Revision 4
RFT-EU-NB-OP-23l1 5-23-14