Specification for a Sine Output OCXO MtronPTI P/N: XO5089-Series Frequency offering: 10MHz to 40MHz High Stability, Low Aging and Ultra-Low Phase Noise Custom features: low g-sens available Applications: Test Equipment, Satcom, RADAR Electrical Specifications for Representative 10MHz OCXO Unless otherwise specified; T= +25°C, VS = +5VDC, VC = +2.5VDC, Load= 50Ω Parameter Symbol Min. Typ. Max. Units Conditions Nominal Frequency FO 10.000000 MHz Initial Frequency -100 +100 ppb At time of shipment Frequency Stabilities vs. Temperature Range -10 +10 ppb -20°C to +70°C vs. Supply Voltage -2.5 +2.5 ppb ±5% change in voltage vs. Load -2.5 +2.5 ppb ±5% change in load Aging/Day -0.5 +0.5 ppb After 30-days Power On Aging/Year -100 +100 ppb Short Term Stability -11 1 x10 Per Second. (Allan deviation) RF Output Output Type Sinewave Output Load 50 Ω ±5% Level VOH +10 dBm In a 50Ω load Frequency Adjustment Method External Voltage Tuned Tuning Slope Positive Tuning Voltage VTUNE 0 +5 VDC Modulation Bandwidth 1 kHz Other Parameters Standard Phase Noise Option -105 @ 1Hz Offset -137 @ 10Hz Offset -155 @ 100Hz Offset dBc/Hz -162 @ 1kHz Offset -169 @ 10kHz Offset -169 @ 100kHz Offset Low Phase Noise Option -112 @ 1Hz Offset -142 @ 10Hz Offset -155 @ 100Hz Offset dBc/Hz -162 @ 1kHz Offset -170 @ 10kHz Offset -170 @ 100kHz Offset 1 of 3 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. Specification for a Sine Output OCXO MtronPTI P/N: XO5089-Series Ultra-low phase noise option ΔF/F Warm-up Time Harmonics Spurious Vref Supply Voltage VS -115 -143 -158 -165 -170 -172 dBc/Hz 5 Minutes -30 -80 dBc dBc V 4.1 Supply Voltage & Power Consumption 4.75 5.0 5.25 Power Consumption @ 1Hz Offset @ 10Hz Offset @ 100Hz Offset @ 1kHz Offset @ 10kHz Offset @ 100kHz Offset To be within ±100ppb, @ 25˚C, referenced to the frequency after 24hour power on VDC 2.5 Watts 4.5 Watts Max. +70 Units °C +85 °C Steady state @ 25°C, in still air In still air @ turn on Environmental Conditions: Parameter Operating Temperature Storage Temperature Symbol OTR Min. -20 STR -55 Typ. Vibration (survival) Per MIL-STD 202G, Method 204, Condition A Shock (survival) Per MIL-STD 202G, Method 213, Condition C Solderability Per EIAJ-STD-002 RoHS Full RoHS Compliance Conditions Mechanical, marking and pin out Information: Thru-hole option: Pin 1 2 3 4 5 Function RF Output Case Ground Vtune Vref Supply Voltage 2 of 3 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. Specification for a Sine Output OCXO MtronPTI P/N: XO5089-Series SMT Option: Pin 1 4 7 8 19 Function RF Output Case Gnd V Tune V ref Supply Voltage Line 1 Line 2 Line 3 Line 4 Line 5 Part Marking MtronPTI XO5089-0xxR 10.000MHz Serial Number Date Code Reflow Profile for SMT Version: Data Sheet Revision Table: Date 05-05-16 Rev. A Orig. DPD Details of Revision Original Release. 3 of 3 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI.