Space Level BME X7R MLCC ESCC QPL 3009/041 Approved The AVX Space BME (Base Metal Electrode) X7R surface mount MLCC utilises leading edge technology in MLCC construction and material processing. The BME technology delivers a superior capacitance voltage capability compared to conventional PME (Precious Metal Electrode) technologies with the reliability levels demanded by the space industry. The availability of higher capacitance values in smaller case sizes not only reduces the amount of board space required by the engineer but also the weight of the complete PCB. These surface mount components also incorporate Flexiterm®, which greatly improves the resistance to the mechanical stress experienced by MLCCs FEATURES • Higher CV capability than PME capacitors resulting in reduced weight of components and reduction in PCB space required. • Use of Flexiterm® technology for enhanced mechanical stress resistance. • Capacitance values up to 8.2uF available. HOW TO ORDER 3009041 06 225 J E Detailed Spec 3009041 Component Variant 02 (0603) 03 (0805) 04 (1206) 05 (1210) 06 (1812) Capacitance Code 2 significant digits + number of zeros e.g. 103 = 10nF 225 = 2.2μF Capacitance Tolerance J = 5% K = 10% M = 20% Voltage X = 16V A = 25V C = 50V E = 100V Please note all parts are terminated with a minimum 10% Pb plating. All parts packed in waffles. Lot Validation Testing (LVT) can be ordered separately, LVT Groups 3, 2b, 2a, 1. DIMENSIONS W L T t Size mm (inches) 0603 Min. Max. (L) Length 1.45 (0.057) 1.75 (0.069) (W) Width 0.65 0.026) 0.95 (0.037) (T) Thickness 1.00 (0.039) Max. (t) terminal 0.20 (0.008) 0.50 (0.020) 2 ■ JULY 2015 0805 1206 1210 Min. Max. Min. Max. Min. Max. 1.80 (0.071) 2.20 (0.087) 3.00 (0.118) 3.40 (0.134) 3.00 (0.118) 3.40 (0.124) 1.05 (0.041) 1.45 (0.057) 1.40 (0.055) 1.80 (0.071) 2.30 (0.091) 2.70 (0.106) 1.52 (0.060) Max. 1.80 (0.071) Max. 2.80 (0.110) Max. 0.25 (0.010) 0.75 (0.030) 0.25 (0.010) 0.75 (0.030) 0.25 (0.010) 0.75 (0.030) 1812 Min. Max. 4.20 (0.165) 4.80 (0.189) 3.00 (0.118) 3.40 (0.124) 2.80 (0.110) Max. 0.25 (0.010) 0.95 (0.037) Space Level BME X7R MLCC ESCC QPL 3009/041 Approved PREFERRED SIZES ARE SHADED Case Size 0603 Code Value 16V 25V 50V 100V 16V 222 2.2 (nF) 272 2.7 332 3.3 392 3.9 472 4.7 562 5.6 682 6.8 822 8.2 103 10 123 12 153 15 183 18 223 22 273 27 333 33 393 39 473 47 563 56 683 68 823 82 104 100 124 120 154 150 184 180 224 220 274 270 334 330 394 390 474 470 564 560 684 680 824 820 105 1 (μF) 125 1.2 155 1.5 185 1.8 225 2.2 275 2.7 335 3.3 395 3.9 475 4.7 565 5.6 685 6.8 825 8.2 106 10 0805 25V 50V 100V 16V 1206 25V 50V 100V 16V 1210 25V 50V 100V 16V 1812 25V 50V 100V JULY 2015 ■3 Space Level BME X7R MLCC ESCC QPL 3009/041 Approved ELECTRICAL MEASUREMENTS AT ROOM TEMPERATURE The measurements shall be performed at Tamb = +22 ±3°C. Charateristics Symbol Test Method and Conditions Capacitance (Note 1) CA ESCC No. 3009 Tangent of Loss Angle tgδ Insulation Resistance RI Voltage Proof VP ESCC No. 3009 For UR = 50V, 100V: For UR = 16V, 25V: ESCC No. 3009 For Cn ≤ 10000pF: For Cn > 10000pF: ESCC No. 3009 Tolerance (± %) 5 10 20 Limits Unit Min. 0.95Cn 0.9Cn 0.8Cn Max. 1.05Cn 1.1Cn 1.2Cn All – – 250 x 10-4 300 x 10-4 – – All 100 1000 2.5UR – – – GΩ GΩ nF V All pF NOTE: 1. 300 max for 16 volt and 25 volt rated components ELECTRICAL MEASUREMENTS AT HIGH AND LOW TEMPERATURE Charateristics Symbol Insulation Resistance RI Temperature Characteristic TC Test Method and Conditions (Note 1) ESCC No. 3009 For Cn ≤ 10000pF: For Cn > 10000pF: ESCC No. 3009 Tamb = -55 ±2°C, +20 ±2°C, +125 ±2°C (Note 2 and 3) For VT = no voltage applied: Limits Min. Max. 10 100 – Unit GΩ GΩ nF % -15 +15 NOTE: 1. Single Sample, Inspection Level S3, AQL = 2.5% 2. If 1 failure out of 5 parts, then test 100%. 1.0% rejects maximum allowed in case of 100% testing. 3. X7R dielectric: Delta C/C at UR is typically -10% to -70% dependant on capacitance value. (See curves on next page) LVT 3009041 TEST DETAIL L V T Group Test Number 3 2b 2a 1 4 ■ JULY 2015 LVT 3009041 Test Detail, Parametric Data Recorded Solderability PCB Mounting, Capacitance Temperature Characteristics and Robustness of Termination PCB Mounting, Life testing for 1000 hours, 2 x RV @ 125ºC PCB Mounting, Rapid Change of Temperature , Steady state humidity testing, (1.5 Volts DC @ 85ºC / 85% Hum) 1000 hours, external visual inspection Min No. Of Pcs for Test 3 3 10 20 Space Level BME X7R MLCC ESCC QPL 3009/041 Approved TYPICAL ELECTRICAL CHARACTERISTICS FOR ESCC BME SURFACE MOUNT CAPACITANCE TEMPERATURE CHARACTERISTICS FOR 0805 STYLE (WITH DC BIAS) Typical Cap. Change vs DC Bias for 0805 style 10 0 Cap. Change (%) -10 -20 -30 08055C 223 08055C 104 08051C 222 08055C 474 -40 -50 -60 -70 -80 0 10 20 30 40 50 DC Bias (Vdc) IMPEDANCE WITH ESR CHARACTERISTICS FOR 0805 CAPACITANCE RANGE Z & ESR Curves 100 (0hms) 10 08051C 222 Imp 08051C 222 ESR 08051C 223 Imp 08051C 223 ESR 08055C 104 Imp 08055C 104 ESR 08055C 474 Imp 08055C 474 ESR 1 0.1 0.01 0.001 1 10 100 1000 Freq (MHz) If required AVX will produce a data sheet for each part number with the following information: a) Impedance/ESR Frequency Sweep b) Capacitance Change with Temperature form -55ºC to +125ºC c) Capacitance Change with DC Voltage up to the rated voltage of the component d) Temperature Change with AC Current applied for higher capacitance values. JULY 2015 ■5