PDF CE Marked Low Voltage Directive (2014/35/EU) and RoHS Recast Directive (2011/65/EU)

EU Declaration of Conformity
Vicor Corporation
25 Frontage Road
Andover, MA 01810
USA
This Declaration of Conformity is issued under the sole responsibility of Vicor Corporation, as the
manufacturer:
Declare that the
FIAM Series of Filter Input Attenuator Modules
Model: FIAM072xyy-aa or FIAM110xyy-aa
to which this declaration relates, are in conformity with the following EU Directives listed below by using the
relevant sections of the following EU harmonized standards and other normative documents.
Low Voltage Directive 2014/35/EU
EN 60950-1/A2:2013 Standard for Safety of Information Technology Equipment
RoHS Recast Directive 2011/65/EU
FprEN 50581/2012 Technical Documentation for the assessment of Electrical and Electronic Products with
respect to the Restriction of Hazardous Substances
The FIAM Series of Filter Input Attenuator Module are designed for building-in and must be installed in
accordance with any conditions of acceptability specified by Vicor Corporation and its subsidiaries.
1.
2.
3.
The maximum baseplate temperature of the FIAM series in the end application is 100 °C
The input to the FIAM072 or MVA-FIAM072 series requires a Bussmann ABC fuse rated 15A or less.
The FIAMwwwxyy-aa = MVA-FIAMwwwxyy-aa for cold plate and connector option. (www = 072 or 110)
13 May 2016
Michael McNamara
Vice President, Quality & Technical
Operations
Date