N-Series Datasheet [pdf]

N-Series
N-Series
ADDRESSABLE ROCKER SWITCHES
The N-Series Addressable Switch combines the look and feel of a traditional electro-mechanical control
coupled with a built in PCB and provides a flexible, cost effective alternative to a CAN/LIN based switch.
The N-Series produces up to 144 individual switch IDs by using a resistive ladder circuit. Different switch
IDs are achieved by changing the resistor values tied to individual loads, which can then be assigned to the
specific functions that the switch is controlling. Each switch is connected to an ECU and the application
software is written to recognize the switch IDs to determine which load is being controlled as well as the
selected actuator position. As a result, the wiring harnesses are more simplified and specific loads can now
be rearranged without the need for a costly and time consuming harness redesign, giving designers the
ultimate in design flexibility.
Resources:
Download 3D CAD Files
IGS
Product Highlights:
Cost effective alternative to CAN/LIN based switch
ŠŠ Up to 144 individual switch IDs
ŠŠ Simplified wiring harnesses
ŠŠ Readdressable loads without harness redesign
ŠŠ Available with paddle or rocker actuator
ŠŠ
STP
Typical Applications:
On-Highway Transportation Equipment
Agricultural Equipment
ŠŠ Construction Equipment
ŠŠ Marine
ŠŠ
ŠŠ
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Email: [email protected]
Application Support: [email protected]
Phone: 860.793.9281 Fax: 860.793.9231
www.carlingtech.com
2 | N-Series Addressable Rocker Switches - General Specifications
Electrical
Environmental
Contact Rating
.4VA @ 28VDC (MAX)
Dielectric Strength
1250 Volts RMS between pole to pole 3750 Volts RMS between live parts and accessible surfaces
Insulation Resistance
50 Megaohms
Contact Bounce
20 milliseconds max.
Contacts
gold plated
Terminals
Brass or copper/silver plate
3/16” (4.76mm)
Quick Connect terminations standard.
Mechanical
Endurance
250,000 cycles minimum
Physical
1.970
Lighted
Incandescent - rated 10,000 hours
LED - rated 100,000 hours 1/2 life
(LED is internally ballasted for
voltages to 24VDC)
Seals
Rocker, base & bracket are sealed.
Base
Nylon 66 GF rated to 85°C with a flammability rating of 94V0.
Rocker and Paddle
Nylon 66 Reinforced, rated to 105°C
Laser Etched Rocker
Polycarbonate rated at 100°C.
Lens
Polycarbonate rated at 100°C.
Front snap-in.
Connector
Nylon 66 rated at 85°C. Polarized.
Bracket
Nylon Zytel
Actuator Travel (Angular Displacement)
2 position .260 [6.60]
3 position 26°
13° from center
Environmental
Operating Temperature
Vibration
Salt Spray
Humidity IP67 for above the panel components of the actual switch, representing an index of protection as applied to electrical equipment in accordance with IEC 529, BS 5490, DIN 400 50 & NFC 20 010.
-40°C to +85°C
Per SAE J1399 “electronic Tachometer Specification” for Class
II truck and bus applications.
Test Criteria: No change in resistance and no evidence of physical damage.
Exposure to 95% water, 5% NCI
fog solution at 95 degrees F
according to ASTM B 117-90
“Standard Method of Salt
Spray (fog) Testing”. Test Criteria:
No visual evidence of corrosion or
external physical damage.
Samples were exposed to selected
temperature profile, while
maintaining 90% +- 5% relative
humidity for 30 cycles. Test
Criteria: No evidence of external
physical deterioration.
Mounting Specifications
.867 [22.02]
1.734 [44.04]
1.020 [25.91]
TEST CUT
HOLE IN
ACTUAL
MATERIAL
MOUNTING HOLE
2.265 [57.53]
3.055 [77.60]
Panel Thickness Range
Acceptable Panel Thickness
.030 to .156 (.76mm to 3.96mm)
Recommended:
.030, .062, .093, .125 and .156
.250 X .031
[6.35 X .79]
T3
GROUND
PADDLE STYLE ACTUATOR
Q.C. SELECTION GUIDE
*Manufacturer reserves the right to change product specification without prior notice.
[8.74]
WIRE GAGE
COMPANY
SERIES
PACKARD
PART NO.
AWG
MM 2
METRI-PACK
12015870
16-14
2.0-1.0
Email: [email protected] Application
Support: [email protected]
12084590
3.0
12
Phone: (860) 793–9281
Fax:
(860)
793–9231
www.carlingtech.com
12
PACKARD
12052224
3.0
N-Series Addressable Rocker Switches - Ordering Scheme | 3
N 4 1 2 1 A N H 1
1
Series
2
Actuator
3
R1
Resistive
ID
4
R2
Resistive
ID
5
6
7
Resistor
Illumination Lamp
Constants
8
Lamp
1 1 2 46
10
Actuator
9
Bracket
11
Lens Style
& Color
Lamp 1
1 EK
12
13
Lens Style Legend
& Color
Lamp 2
14
15
Legend
Actuator
Orientation Lens Legend
1 SERIES
N
7,8 LAMP (SAME CODING FOR BOTH SELECTIONS)
Selection 7: above terminals 10 & 9; Selection 8: above terminals 12 & 11
No lamp
0
2 CIRCUIT 2
Terminal Orientation
LED*
Red
AmberGreen
12VDC
C NH
* Consult factory for “daylight bright”, blue/green and white LED options.
Typical current draw for LED is 20ma.
Position: 1
( ) - momentary
2
3
STANDARD
2 & 4 Connected Terminals 1 & 2 4
OnNONEON
5
(On)NONEON
6
OnONON
7
(On)ONOn
8
(On)ON(On)
3 R1 RESISTIVE IDENTIFICATION
1
1020 21300
31620
42000
52430
62940
73570
8
4320
A
5230
B
6340
C
7870
D
10000
4 R2 RESISTIVE IDENTIFICATION
1
1020 21300
31620
42000
52430
62940
73570
8
4320
A
5230
B
6340
C
7870
D
10000
6 ILLUMINATION
Lamp #1:above terminals 9 & 10 end of switch.; Lamp #2 above terminals
11 & 12 end of switch. Positive (+) and negative (-) symbols apply to LED
lamps only.
Lamps
Illumination Type Lamp wired to Terminals
SNone
A
#1
Standard 10+ 12
#2
Standard 11+ 9B
#1&2
Special Parallel 11+ 9C
#1&2
Special Parallel 10+ 91
#1
Independent 10+ 92
#2
Independent 12+ 113
#1
Independent 10+ 9
#2 Independent 12+ 94
#1 Independent 10+ 9
#2
Independent 12+ 11-
Black 6
L
E
White 7
B
F
10 ACTUATOR STYLE AND COLOR 1
Black White Gray Rocker
A
B
C
Paddle
J
N
K
Gray 8
C
G
Red D
M
Red
9
D
H
Laser Etched
1
11 & 12 LENS STYLE AND COLOR
Lens color for LEDs must be clear, white, or match color of LED.
0 - No ActuatorZ - No Lens
Clear White Amber Green 1
-
B
G
-
7
C
H
3
-
D
J
-
9
E
K
5
A
-
-
Red M
N
P
R
-
Blue
T Large Transparent
U Large Translucent
V Bar Transparent
W Bar Translucent
- Laser Etch background color
13 LEGEND ORIENTATION
00 No legend this location / no actuator
For legend options & codes, see pages 54-65 of this catalog.
14 LEGEND ORIENTATION
0 No legend (used with codes 11-18 in selection 12)
1 Orientation 1 - vertical, lamp 1 on top
2 Orientation 2 - horizontal, lamp 1 on right
3 Orientation 3 - vertical, lamp 1 on bottom
4 Orientation 4 - vertical, lamp 1 on left
Orientation
1
AA
46
46
3AA-146
Orientation
2
5 RESISTOR CONSTANTS (INDICATES SWITCH STATE)
R3 R4R5
1 1300 10000 5320
2 825 66503830
9 BRACKET COLOR 1
Standard Bracket Rockerguard at Lamp 1
Rockerguard at Lamp 2
Orientation
4
AA
3AA-246
Orientation
3
15 ACTUATOR LENS LEGEND
00 No legend this location / no actuator
For legend options & codes, see pages 54-65 of this catalog.
Notes:
1 Custom colors are available. Consult factory.
2 Switch supplied with .187 tab terminals.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
4 | N-Series Addressable Rocker Switches - Dimensional Specifications
Dimensional Specifications: in. [mm]
N-SERIES
N-SERIES
SHOWN WITH LASER ETCHED ACTUATOR
SHOWN WITH ROCKER GUARD
1.970 [50.04]
1.020 [25.91]
.435 [10.16]
.400 [10.16]
1.450 [36.83]
.855 [21.72]
N-SERIES
N-SERIES
SHOWN WITH LARGE LENS
AND PADDLE ACTUATOR
SHOWN WITH BARS LENS
AND CONNECTOR
1.970 [50.04]
1.020 [25.91]
.400 [10.16]
.391 [7.62]
2.380 [60.45]
N-SERIES
N-SERIES
LC2-01 BLACK .187 TAB CONNECTOR (PACKARD 480-SERIES)
LH1 REMOVABLE HOLE PLUG WITH NON-SERRATED WINGS
LH2 HOLE PLUG WITH SERRATED WINGS
1.970 [50.04]
1.020 [25.91]
.500 [12.70]
.920 [23.37]
1.325 [33.66]
1.710 [43.43]
.300 [7.62]
.790 [20.07]
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
.855 [21.72]
N-Series Addressable Rocker Switches - Circuit Diagrams & Lamp Circuit Diagrams | 5
Circuit Diagrams:
Lamp Circuit Diagrams:
SWITCH CIRCUIT DIAGRAMS
SWITCH CIRCUIT DIAGRAMS
T
CIRCUIT
SCHEMATIC
CODE
SCHEMATIC
9
P1
P3
R5
2
R5
8
7
ILLUM.
CODE
9
R3 P1 R4 P3
R1 R2
4
R3
INTERNAL
CIRCUIT
R4 R1 R2
BOARD
(TYPICAL)
2
P3
5
R5
R3 P1 R4
2
R1 R2
P3
7
INTERNAL
CIRCUIT
BOARD
(TYPICAL)
R3
8
R4
2
R1 R2
1
A
P3
6
P2 R1 R2
R3P1 R4
P3
R5
2
9
R5
R4
2
8
7
R3
P2
P3
P2
R3 P1 R4
R5
7
R1 R2
P3
(-) 12
(-) 9
(-) 9 (+) 11
(+) 11
B
1
R3
R4
P3
8
1
C
2 1
(+) 10
(+) 10
(-) 9
(-) 9
1
1
1
(+) 10
R1 R2
7
8
2
8
7
9
P2
2
1
2
1
(+) 10
(-) 11
2
P1
2
(-) 9
C
8
7
9
R5
2
(+) 10(-) 12
B
R1 R2
9
P1
1
8
7
9
P2
2
(+) 11
(+) 10
(-) 9
P1
SCHEMATIC
(-) 9(+) 11
A
9
R5
ILLUM.
SCHEMATIC
CODE
(-) 9
8
7
9
P1
LAMP CIRCUIT DIAGRAMS
LAMP CIRCUIT DIAGRAMS
P2
R3P1 R4 P3
R1 R2
R5
2
2
R3
R5
R4
7
8
2
(-) 9
R1 R2
7
2
(+) 12
9
3
2
2
(-) 11
8
(+) 12
(-) 9
1
3
2
1
2
(+) 10
(+) 12
(+) 10
(+) 12
(-) 9
(-) 9(-) 11
(-) 11
4
1
(+) 10
4
2
1
(+) 12
(+) 10
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
2
(+) 12
6 | Notes
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Reps & Contact | 7
Authorized Sales Representatives
Click on the group name on the map below to find your local representative or visit
www.carlingtech.com/findarep.
«
«
Matera
W. Canada
Matera
E. Canada
MIDWEST
DM
Michigan
TEMCO Northwest
Alaska, Hawaii
«
NORTHERN
Hanna Lind Ltd.
Melody
Emery
Sierra
Bridge Marketing
Omega Limited
Dy-tronix Inc.
LD. Allen
Norris
DM Assoc
East
Pacent
DM
Assoc
TSI North
TSI
WEST
Signal
Enterprises
Luscombe
Engineering
Pinnacle Marketing
Sunbelt Components
«
South America
DM Mexico
Mexico
SOUTHEAST
ProRep
Solutions
«
Matrix
LATIN AMERICA
Americas
Europe
Middle East
Africa
Asia-Pacific
Oceania
About Carling
Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches
and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power
distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide,
Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical
components, they engineer powerful solutions! To learn more about Carling please visit
www.carlingtech.com/company-profile.
To view all of Carling’s environmental, quality, health & safety certifications please visit
www.carlingtech.com/environmental-certifications
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Worldwide Headquarters
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Phone: 860.793.9281 Fax: 860.793.9231
Email: [email protected]
Northern Region Sales Office: [email protected]
Southeast Region Sales Office: [email protected]
Midwest Region Sales Office: [email protected]
West Region Sales Office: [email protected]
Latin America Sales Office: [email protected]
Asia-Pacific Headquarters
Carling Technologies, Asia-Pacific Ltd.,
Kowloon, Hong Kong
Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332
Email: [email protected]
Shenzhen, China: [email protected]
Shanghai, China: [email protected]
Pune, India: [email protected]
Kaohsiung, Taiwan: [email protected]
Yokohama, Japan: [email protected]
Europe | Middle East | Africa Headquarters
Carling Technologies LTD
4 Airport Business Park, Exeter Airport,
Clyst Honiton, Exeter, Devon, EX5 2UL, UK
Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477
Email: [email protected]
Germany: [email protected]
France: [email protected]
www.carlingtech.com
REV_06_2016