DECEMBER, 2015 1600 Wall SystemTM2 Curtain Wall FEATURES Features • 1600 Wall SystemTM2 is an outside glazed structurally silicone glazed curtain wall • 1600 Wall SystemTM2 has a 2-1/2" (63.5) sight line • Standard 6" (152.4) or 7-1/2" (190.5) depth systems • Standard infill options 1/4" (6.4) and 1" (25.4), other infills available • Thermally Broken by means of a continuous 1/4" (6.4) low conductance spacer • Concealed fastener joinery creates smooth, monolithic appearance • Open-back horizontals and perimeters are available for cost savings • Shear block fabrication method • Corners and splayed mullions available • Offers integrated entrance framing systems • Silicon compatible glazing materials for long-lasting seals • 1600 Wall SystemTM2 has been small and large missile impact and cycle tested • Two color option • PermanodicTM anodized finishes in seven choices • Painted finishes in standard and custom choices Optional Features • Steel reinforcing available • Rain screen and backpans • Optional deep profile and bull-nose covers available • Deep and heavy-weight mullions available • Fiberglass pressure plates available • Veneer system available • Integrates with concealed GLASSventTM for curtain wall • Integrates with VersoleilTM SunShade Outrigger System and Horizontal Single Blade Systems • Profit$MakerTM plus die sets available • Hurricane impact resistant framing option: 7-13/16" (198.4) © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. EC 97911-086 Product Applications • Ideal for low to mid-rise applications where high performance is desired • It is also the right choice for high span applications For specific product applications, Consult your Kawneer representative. kawneer.com ADMD020 1 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 Wall SystemTM2 Curtain Wall BLANK PAGE ADMD020 kawneer.com © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 2 DECEMBER, 2015 EC 97911-086 DECEMBER, 2015 1600 Wall SystemTM2 Curtain Wall EC 97911-086 3 INDEX Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility. Please contact your Kawneer representative for further assistance. LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. PICTORIAL VIEW.................................................................................5 1" INFILL DETAILS...............................................................................6 1/4" INFILL DETAILS............................................................................7 ENTRANCE DETAILS.......................................................................8,9 CORNERS...........................................................................................10 SPLAYED MULLION OPTIONS.........................................................11 GLASSventTM FOR CURTAIN WALL/WINDOWS..............................12 BACKPAN AND MISCELLANEOUS DETAILS .................................13 MISCELLANEOUS FRAMING............................................................14 HURRICANE IMPACT RESISTANT DETAILS..............................15,16 ANCHORING.................................................................................17,18 WIND LOAD CHARTS.................................................................. 19-30 DEADLOAD CHARTS.................................................................. 31-33 THERMAL CHARTS..................................................................... 34-42 The following metric (SI ) units are found in these details: m –meter cm – centimeter mm –millimeter s –second Pa –pascal MPa –megapascal Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvement. kawneer.com ADMD020 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 Wall SystemTM2 Curtain Wall BLANK PAGE ADMD020 kawneer.com © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 4 DECEMBER, 2015 EC 97911-086 © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2015 kawneer.com 1600 Wall SystemTM2 Curtain Wall EC 97911-086 PICTORIAL VIEW ADMD020 5 9A 7 3 4 7 5 1A 8 8A 6 6A 8 9 ADMD020 2 3 8A 4 9B OPTIONAL STEEL REINFORCING AS REQUIRED 5 6A 6 kawneer.com © Kawneer Company, Inc., 2014 1" INFILL DETAILS Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 Wall SystemTM2 Curtain Wall Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. ELEVATION IS NUMBER KEYED TO DETAILS 2-1/2" (63.5) 9 9A 9B 5-1/4" (133.6) 2 3-3/4" (95.3) 6 DECEMBER, 2015 EC 97911-086 SCALE 3" = 1'-0" 1 1A 1 6" (152.4) 7 -1/2" (190.5) 2-1/2" (63.5) © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. ELEVATION IS NUMBER KEYED TO DETAILS 7A kawneer.com 6 2-1/2" (63.5) OPTIONAL STEEL REINFORCING AS REQUIRED 5A ADMD020 2-1/2" (63.5) 5-1/4" (133.6) 7 7A 7B 3-3/4" (95.3) DECEMBER, 2015 1600 Wall SystemTM2 Curtain Wall EC 97911-086 1/4" INFILL DETAILS SCALE 3" = 1'-0" 1 1A 1 2 3 6 6A 4 1A 5 5A 2 6 -3/4" (171.5) 5-1/4" (133.4) 7 3 6A 4 7B 5 7 1600 Wall SystemTM2 Curtain Wall 8 DECEMBER, 2015 ENTRANCE DETAILS (1" INFILL) EC 97911-086 SCALE 3" = 1'-0" 3 2 5 4 1 6 TRANSOM BAR B/H OR O/P C/H BUTT HUNG OR OFFSET PIVOT WITH SURFACE CLOSER OR FLOOR CLOSER B/H OR O/P ELEVATION IS NUMBER KEYED TO DETAILS 1A DOOR JAMB 1-7/8" (47.6) TYP. 2 BUTT HUNG OR OFFSET PIVOT Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1 1A TRANSOM BAR 3 DOOR JAMB 4 CENTER HUNG TRANSOM BAR CENTER HUNG CONCEALED OVERHEAD OR FLOOR CLOSER DOOR JAMB 6 BUTT HUNG OR OFFSET PIVOT 5 TRANSOM BAR BUTT HUNG OR OFFSET PIVOT WITH LCN CONCEALED OVER HEAD CLOSER OR SURFACE CLOSER ADMD020 kawneer.com © Kawneer Company, Inc., 2014 3/4" (19.0) TYP.. Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. BUTT HUNG OR OFFSET PIVOT WITH SAM II CLOSER © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1-7/8" (47.6) TYP. TYP Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2015 2 B/H OR O/P 2 kawneer.com 1600 Wall SystemTM2 Curtain Wall EC 97911-086 ENTRANCE DETAILS (1/4" INFILL) SCALE 3" = 1'-0" 1 1A 3 4 1 C/H TRANSOM BAR ELEVATION IS NUMBER KEYED TO DETAILS BUTT HUNG OR OFFSET PIVOT WITH SURFACE CLOSER OR FLOOR CLOSER DOOR JAMB BUTT HUNG OR OFFSET PIVOT 1A 3/4" (19.0) TYP.. TRANSOM BAR BUTT HUNG OR OFFSET PIVOT WITH SAM II CLOSER DOOR JAMB CENTER HUNG 4 3 TRANSOM BAR CENTER HUNG CONCEALED OVERHEAD OR FLOOR CLOSER ADMD020 9 90° OUTSIDE CORNER 90° INSIDE CORNER 135° OUTSIDE CORNER 135° INSIDE CORNER ADMD020 kawneer.com © Kawneer Company, Inc., 2014 CORNERS Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 Wall SystemTM2 Curtain Wall Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 10 DECEMBER, 2015 EC 97911-086 SCALE 3" = 1'-0" NOTE: 1" SYSTEM SHOWN, 1/4" SYSTEM SIMILAR. © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2015 0° TO 5° 0° TO 5° kawneer.com 1600 Wall SystemTM2 Curtain Wall EC 97911-086 SPLAYED MULLION OPTIONS SCALE 3" = 1'-0" 5° TO 15° 5° TO 15° INSIDE SPLAYED MULLIONS ADMD020 15° TO 25° OUTSIDE SPLAYED MULLIONS 15° TO 25° 11 HEAD SILL JAMB 8225TL THERMAL WINDOWS NOTE: Other vent types can be accommodated. Contact your Kawneer representative for other options. HEAD SILL JAMB ADMD020 kawneer.com © Kawneer Company, Inc., 2014 GLASSventTM FOR CURTAIN WALL/WINDOWS Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 Wall SystemTM2 Curtain Wall Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 12 DECEMBER, 2015 EC 97911-086 SCALE 3" = 1'-0" GLASSventTM FOR CURTAIN WALL © Kawneer Company, Inc., 2014 6" (152.4) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. kawneer.com 6 7 3 ELEVATION IS NUMBER KEYED TO DETAILS NOTE: 6" SYSTEM SHOWN, 7-1/2" SYSTEM SIMILAR 1 JAMB MULLION AT SPANDREL (With vapor barrier tie-in) 3 THERMALLY BROKEN DOOR ADAPTOR FOR INSULCLAD DOORS AATM 250 THERMAL ENTRANCE D.L.O. 2 MULLION LENGTH 1 3/8" (9.5) 2-1/2" (63.5) 3/8" (9.5) D.L.O. MULLION LENGTH CONSTRUCTION JOINT 1/2" (12.7) MAX (ALLOWS +/-1/4" MOVEMENT) DECEMBER, 2015 1600 Wall SystemTM2 Curtain Wall EC 97911-086 BACKPAN AND MISCELLANEOUS DETAILS SCALE 3" = 1'-0" 4 4 5 HEAD TRANSOM AT PARAPET FLASHING 5 EXPANSION JOINT 2 6 2-1/2" (63.5) MULLION AT SPANDREL TYPICAL DEADLOAD ANCHOR 3 7 TRANSOM – SPANDREL OVER VISION ADMD020 13 14 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 MISCELLANEOUS FRAMING EC 97911-086 SCALE 3" = 1'-0" 4-3/4" (120.7) Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility. Please contact your Kawneer representative for further assistance. 2-1/2" (63.5) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 3" (76.2) 2-1/2" (63.5) 1-1/4" (31.8) 7-1/2" (190.5) 10-1/2" (266.7) 4" (101.6) 2-1/2" (63.5) 6" (152.4) 1-3/16" (30.1) 2" (50.8) 2-3/4" (69.7) 4" SIGHT LINE OPTIONAL COVERS 2-1/2" (63.5) VENEER SYSTEM DOUBLE MULLION 069263 GYPSUM BOARD TRIM 2-1/2" (63.5) OPTIONAL FIBERGLASS PRESSURE PLATE STOOL TRIM OPTIONS: 069264 - 2-3/4" (69.9) 069265 - 4-1/2" (114.3) 069266 - 5" (127.0) 069267 - 6-1/8" (155.6) 069268 - 6-3/4" (171.4) NOTE: STOOL TRIMS REQUIRE 069271 TRIM CLIP PACKAGE INTERIOR STOOL TRIM ADMD020 kawneer.com © Kawneer Company, Inc., 2014 VARIES CAPTURED MULLION (1") 2-1/2" (63.5) 2-1/2" (63.5) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 2-1/2" (63.5) 1-3/4" (45) DEEP MULLION © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 2 5 5A kawneer.com 7 7 2 5 2-1/2" (63.5) EC 97911-086 8 ELEVATION IS NUMBER KEYED TO DETAILS EXPANSION HORIZONTAL 5A OPTIONAL STEEL REINFORCING AS REQUIRED ADMD020 2-3/4" (69.9) DECEMBER, 2015 1600 Wall SystemTM2 Curtain Wall HURRICANE IMPACT RESISTANT DETAILS SCALE 3" = 1'-0" NOTE: DETAILS SHOWN WITH 1-5/16" INFILL AND ARE GLAZED FOR LARGE MISSLE IMPACT (LMI). SEE NEXT PAGE FOR OTHER GLAZING OPTIONS. 1 1 3 7-13/16" (198.5) 6 10 2 9 4 3 6 4 7 15 16 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 HURRICANE RESISTANT DETAILS SCALE 3" = 1'-0" NOTE: 350 IR DOORS ARE USED WITH IMPACT FRAMING. DOORS ARE GLAZED WITH 9/16" INFILL. 8 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DOOR JAMB AT PERIMETER DOOR JAMB AT MULLION 1-5/16" INFILL (LMI) 9 7/8" (22.2) TYP.. 10 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. TRANSOM BAR 1-5/16" INFILL (LMI) GLAZING OPTIONS 1-5/16" INFILL (SMI) SMALL MISSILE IMPACT 1-5/16" INFILL SMALL MISSILE (SMI) OVER LARGE MISSILE (LMI) ADMD020 kawneer.com © Kawneer Company, Inc., 2014 OPTIONAL 10" DEEP SYSTEM 1-5/16" INFILL (LMI) © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2015 kawneer.com 1600 Wall SystemTM2 Curtain Wall EC 97911-086 ANCHORING Actual project conditions will determine specific anchor design. Details on this page are for reference only. 1" (25.4) MINIMUM ANCHORING TO FLOOR SLAB 1" (25.4) MINIMUM ANCHORING TO SUPPORT STEEL ADMD020 17 ANCHORING TO HORIZONTAL STRUCTURAL STEEL Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 Wall SystemTM2 Curtain Wall ANCHORING ANCHORING TO VERTICAL STRUCTURAL STEEL ADMD020 kawneer.com © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 18 DECEMBER, 2015 EC 97911-086 Actual project conditions will determine specific anchor design. Details on this page are for reference only. DECEMBER, 2015 1600 Wall SystemTM2 Curtain Wall EC 97911-086 19 WIND LOAD/DEADLOAD CHARTS Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4" above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa.). Charted curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load utilized in allowable stress design. To convert ultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of 0.6 per ASCE/SEI 7. A 4/3 increase in allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact your Kawneer representative for additional information. DEADLOAD CHARTS Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1/4" (6.4) thick glass supported on two setting blocks placed at the loading points shown. © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. WIND LOAD CHARTS kawneer.com ADMD020 1600 Wall SystemTM2 Curtain Wall 20 DECEMBER, 2015 WIND LOAD CHARTS (S.S.G.) SINGLE SPAN 1 1.5 TWIN SPAN A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) METERS .5 2 23 EC 97911-086 7 METERS .5 1 1.5 2 30 9 22 6.5 20 28 6 19 5.5 4 13 12 3.5 MULLION HEIGHT EQUAL EQUAL 4.5 14 3-3/4" (95.3) 15 MULLION HEIGHT 5 16 11 162025 10 B 0 1 2 3 I = 2.860(119.04 x 10 ) S = 1.482(24.28 x 103) 7 C 22 6.5 21 D 20 6 E 19 5.5 18 5 16 2.5 15 4.5 14 D E 6 23 2 4 13 4 5 6 7 12 8 0 MULLION CENTERS IN FEET 1 2 3 SINGLE SPAN 1 5 6 7 8 TWIN SPAN METERS METERS .5 4 MULLION CENTERS IN FEET 1.5 .5 2 23 1 1.5 2 30 7 9 29 6.5 21 20 28 6 A 8 26 19 5.5 4 13 12 3.5 11 162026 A 10 3 9 C 8 MULLION HEIGHT EQUAL EQUAL 4.5 14 3-3/4" (95.3) 15 METERS 5 MULLION HEIGHT 17 16 B I = 3.660(152.34 x 104) S = 1.840(30.15 x 103) 2.5 7.5 24 C 23 7 22 D E 21 6.5 20 6 19 5.5 18 17 5 16 15 E D 7 B 25 MULLION HEIGHT IN FEET 18 MULLION HEIGHT IN FEET 8.5 27 METERS 22 4.5 14 2 6 5 4 13 0 1 2 3 4 5 6 7 12 8 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET MULLION CENTERS IN FEET ADMD020 kawneer.com © Kawneer Company, Inc., 2014 7 7.5 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. C 8 A B 24 17 4 3 A 9 MULLION HEIGHT IN FEET 25 17 METERS MULLION HEIGHT IN FEET 8 26 18 5 8.5 27 METERS 21 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 29 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 21 WIND LOAD CHARTS (S.S.G.) SINGLE SPAN METERS .5 1 1.5 2 23 TWIN SPAN A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) 7 METERS 1 .5 1.5 2 30 9 A 28 27 6 19 8 26 5.5 4.5 14 4 13 A 12 3.5 11 C B 10 162027 7.5 E 23 7 22 6.5 21 20 6 19 5.5 18 5 16 I = 6.424(267.38 x 104) S = 2.385(39.08 x 103) 2.5 8 D 24 17 3 E D 9 5-1/4" (133.4) 15 METERS 5 16 MULLION HEIGHT 17 MULLION HEIGHT IN FEET 25 MULLION HEIGHT EQUAL EQUAL 18 15 7 4.5 14 2 6 4 13 0 1 2 3 4 5 6 7 12 8 0 1 2 4 5 6 7 8 MULLION CENTERS IN FEET SINGLE SPAN TWIN SPAN METERS 1 METERS 1.5 2 .5 23 1 1.5 2 30 7 22 6.5 20 28 6 26 5.5 A 13 4 B 12 C 11 10 3.5 162028 2.5 8 8 E 7.5 24 23 7 22 6.5 21 20 6 19 5.5 18 17 3 E D 9 D C METERS 4.5 14 5-1/4" (133.4) 15 METERS 5 16 MULLION HEIGHT 17 MULLION HEIGHT IN FEET 25 MULLION HEIGHT EQUAL EQUAL 18 8.5 B 27 19 9 A 29 21 MULLION HEIGHT IN FEET 3 MULLION CENTERS IN FEET .5 © Kawneer Company, Inc., 2014 8.5 B C METERS 6.5 20 5 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 29 21 MULLION HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 22 I = 8.088(336.64 x 104) S = 2.930(48.01 x 103) 7 5 16 15 4.5 14 2 6 5 4 13 0 1 2 3 4 5 6 7 12 8 MULLION CENTERS IN FEET kawneer.com 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET ADMD020 8 WIND LOAD CHARTS (S.S.G.) 0 1 1 15 14 2 3 1.5 18 17 16 4 5 2 8.5 26 8 25 24 7.5 23 7 21 22 6.5 20 19 A 6 6 B 5.5 C D 5 E 4.5 13 4 MULLION CENTERS IN FEET 7 8 I = 31.174(1297.56 x 104) S = 7.452(122.12 x 103) 162076 ADMD020 kawneer.com © Kawneer Company, Inc., 2014 12 1600 Wall SystemTM2 Curtain Wall Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. METERS 8-1/4" (209.6) .5 MULLION HEIGHT 28 METERS SINGLE SPAN Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. MULLION HEIGHT IN FEET 22 DECEMBER, 2015 EC 97911-086 A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) 27 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 WIND LOAD CHARTS (1" INFILL) SINGLE SPAN METERS .5 1 1.5 SINGLE SPAN A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) 162028 W/162300 2 30 9 162028 W/162301 METERS .5 28 2 9 28 8.5 27 8.5 27 8 25 25 MULLION HEIGHT IN FEET 7.5 MULLION HEIGHT 24 23 6.5 21 20 METERS 7 22 6 19 A 5.5 18 17 B 16 5 C 15 4.5 E 14 D 13 0 1 2 3 162028 with 162300 162028 with 162301 Ia = 8.088(336.64 x 104) Sa = 2.930(48.01 x 103) Is = 3.805(158.37 x 104) Ss = 1.669(27.35 x 103) Ia = 8.088(336.64 x 104) Sa = 2.930(48.01 x 103) Is = 5.684(236.59 x 104) Ss = 2.493(40.85 x 103) 5 6 7 7.5 24 23 7 22 6.5 21 A 20 18 5 16 E 15 4 13 12 8 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET SINGLE SPAN 162028 W/162301/302/303 METERS 1.5 4.5 D 14 162028 W/162301/302 1 5.5 C SINGLE SPAN .5 6 B 19 17 4 4 8 26 METERS 26 MULLION HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1.5 29 MULLION CENTERS IN FEET METERS 2 .5 30 1 1.5 2 30 9 9 29 29 28 28 8.5 8 25 MULLION HEIGHT IN FEET 7.5 7 22 6.5 21 A 20 6 B 19 5-1/4" (133.4) 23 MULLION HEIGHT 24 METERS MULLION HEIGHT IN FEET 25 5.5 18 C 17 5 16 E D 15 162028 with 162301/302 162028 with 162301/302/303 Ia = 8.088(336.64 x 10 ) Sa = 2.930(48.01 x 103) Is = 7.893(328.53 x 104) Ss = 3.462(56.73 x 103) Ia = 8,088(336,64 x 10 ) Sa = 2,930(48,01 x 103) Is = 9,347(389,05 x 104) Ss = 4,100(67,19 x 103) 4 4.5 14 4 4 13 0 1 2 3 4 5 6 7 7.5 24 23 7 22 6.5 21 A 20 B 19 6 C 18 5.5 17 E D 16 5 15 4.5 14 4 13 12 8 MULLION CENTERS IN FEET kawneer.com 8 26 METERS 26 12 8.5 27 27 © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1 30 29 12 23 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET ADMD020 8 1600 Wall SystemTM2 Curtain Wall 24 DECEMBER, 2015 WIND LOAD CHARTS (1" INFILL) SINGLE SPAN 1 1.5 TWIN SPAN A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) METERS .5 2 7 23 EC 97911-086 METERS .5 1 1.5 2 30 9 22 A 26 5.5 25 4 13 A 12 B 11 3.5 MULLION HEIGHT EQUAL EQUAL 4.5 14 6" (152.4) 15 METERS 5 16 MULLION HEIGHT 17 MULLION HEIGHT IN FEET 18 C 10 E 8 22 20 13 12 4 5 6 7 6 E 18 5 3 D 19 5.5 5 4.5 14 2 2 6.5 21 6 1 7 C 15 I = 5.035(209.57 x 104) S = 1.993(32.66 x 103) 0 B 23 16 162001 2.5 7 7.5 24 17 3 D 9 8 8 4 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET MULLION CENTERS IN FEET SINGLE SPAN TWIN SPAN METERS .5 1 METERS 1.5 .5 2 7 23 1 1.5 2 30 9 22 29 6.5 20 6 8 26 5.5 4 13 B 12 3.5 11 MULLION HEIGHT EQUAL EQUAL A 6" (152.4) 4.5 14 MULLION HEIGHT 15 METERS 5 16 C 10 C 23 7 22 6.5 21 D 20 6 19 E 18 5.5 5 16 E 8 7.5 24 17 3 D 9 B 25 17 MULLION HEIGHT IN FEET 18 MULLION HEIGHT IN FEET 8.5 27 19 2.5 7 2 162002 15 I = 6.779(282.16 x 104) S = 2.652(43.46 x 103) 14 4.5 4 13 6 5 A 28 0 1 2 3 4 5 6 7 METERS 21 12 8 MULLION CENTERS IN FEET 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET ADMD020 kawneer.com © Kawneer Company, Inc., 2014 6 19 MULLION HEIGHT IN FEET 8.5 27 METERS 20 28 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 6.5 21 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 29 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 25 WIND LOAD CHARTS (1" INFILL) SINGLE SPAN METERS .5 1 1.5 2 7 23 TWIN SPAN A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) METERS .5 1 1.5 2 30 9 29 6.5 20 28 6 B 26 5.5 25 4.5 B 13 4 C 12 3.5 D 11 E 10 MULLION HEIGHT EQUAL EQUAL A 14 7-1/2" (190.5) 15 METERS 5 16 MULLION HEIGHT 17 MULLION HEIGHT IN FEET 18 MULLION HEIGHT IN FEET 8.5 27 19 3 7 7.5 C 24 7 23 D 22 6.5 21 E 20 6 19 5.5 18 5 16 162003 2.5 8 8 17 9 15 I = 10.135(421.85 x 104) S = 3.027(49.60 x 103) 4.5 14 2 4 13 6 5 A 0 1 2 3 4 5 6 7 12 8 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET MULLION CENTERS IN FEET SINGLE SPAN TWIN SPAN METERS 1 METERS 21 .5 8 METERS 1.5 .5 2 7 23 1 1.5 2 30 9 29 6.5 21 20 28 6 8 26 5.5 B 13 4 C 12 D 3.5 MULLION HEIGHT EQUAL EQUAL 4.5 7-1/2" (190.5) A 14 MULLION HEIGHT 15 METERS 5 16 11 E 10 2.5 8 7 7.5 E 24 7 23 22 6.5 21 20 6 19 5.5 18 17 3 9 D 25 17 MULLION HEIGHT IN FEET 18 MULLION HEIGHT IN FEET 8.5 C 27 19 162004 I = 12.736(530.11 x 104) S = 3.791(62.12 x 103) 2 5 16 15 4.5 14 4 13 6 5 B 0 1 2 3 4 5 6 7 12 8 MULLION CENTERS IN FEET kawneer.com 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET ADMD020 8 METERS 22 © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 22 WIND LOAD CHARTS (1" INFILL) 0 1 1 2 3 1.5 27 26 8 25 24 7.5 23 22 A 7 21 6.5 20 19 B 18 17 D 16 E 4 5 6 6 C 5.5 5 15 14 4.5 13 4 7 MULLION CENTERS IN FEET 8 I = 42.441(1766.52 x 104) S = 8.816(144.47 x 103) 162064 ADMD020 kawneer.com © Kawneer Company, Inc., 2014 12 1600 Wall SystemTM2 Curtain Wall Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. METERS 10-1/2" (266.7) 28 MULLION HEIGHT .5 METERS SINGLE SPAN Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. MULLION HEIGHT IN FEET 26 DECEMBER, 2015 EC 97911-086 A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) 2 8.5 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 WIND LOAD CHARTS (1" INFILL) SINGLE SPAN METERS .5 1 1.5 SINGLE SPAN A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) 162004 W/162300 2 30 9 162004 W/162301 METERS .5 2 9 28 28 8.5 8.5 27 8 25 25 MULLION HEIGHT 7.5 24 22 6.5 21 A 20 6 B 19 18 METERS 7 23 5.5 C 17 5 16 D 15 4.5 E 14 4 13 0 1 2 3 4 5 6 7 8 26 MULLION HEIGHT IN FEET 26 162004 with 162300 162004 with 162301 Ia = 12.736(530.11 x 104) Sa = 3.791(62.12 x 103) Is = 3.805(158.37 x 104) Ss = 1.669(27.35 x 103) Ia = 12.736(530.11 x 104) Sa = 3.791(62.12 x 103) Is = 5.684(236.59 x 104) Ss = 2.493(40.85 x 103) 7.5 24 7 23 22 A 21 20 6 19 C 17 D 16 15 4.5 14 4 13 12 8 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET SINGLE SPAN 162004 W/162301/302/303 METERS 1.5 5 E SINGLE SPAN 1 5.5 18 162004 W/162301/302 .5 6.5 B METERS .5 2 1 1.5 2 30 30 9 9 29 29 28 28 8.5 7 A 22 6.5 21 B 20 6 19 C 18 5.5 17 D 16 5 E 15 4.5 14 4 13 0 1 2 3 4 5 6 7 162004 with 162301/302 162004 with 162301/302/303 Ia = 12.736(530.11 x 104) Sa = 3.791(62.12 x 103) Is = 7.893(328.53 x 104) Ss = 3.462(56.73 x 103) Ia = 12.736(530.11 x 104) Sa = 3.791(62.12 x 103) Is = 9.347(389.05 x 104) Ss = 4.100(67.19 x 103) 8 7.5 24 A 7 23 22 B 21 6.5 20 6 C 19 5.5 18 D 17 5 16 E 15 4.5 14 4 13 12 MULLION CENTERS IN FEET kawneer.com 7-1/2" (190.5) MULLION HEIGHT 23 MULLION HEIGHT IN FEET 25 7.5 24 METERS MULLION HEIGHT IN FEET 25 8 26 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET ADMD020 8 METERS 8 26 © Kawneer Company, Inc., 2014 8.5 27 27 12 METERS 27 MULLION HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1.5 29 MULLION CENTERS IN FEET Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1 30 29 12 27 1600 Wall SystemTM2 Curtain Wall 28 DECEMBER, 2015 WIND LOAD CHARTS (1/4" INFILL) SINGLE SPAN METERS .5 1 1.5 TWIN SPAN A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) 2 7 23 EC 97911-086 1.5 2 9 8.5 27 A 26 25 4 13 12 3.5 11 MULLION HEIGHT EQUAL EQUAL 4.5 14 5-1/4" (133.4) 15 METERS 5 16 MULLION HEIGHT 17 A 10 C D 8 E 7 7.5 24 7 23 22 B 21 6 19 C 18 5 E 15 I = 3.662(152.42 x 104) S = 1.662(27.24 x 103) 5.5 D 16 162013 2.5 6.5 20 17 3 B 9 MULLION HEIGHT IN FEET 5.5 18 8 4.5 14 2 4 13 6 0 1 2 3 4 5 6 7 12 8 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET MULLION CENTERS IN FEET SINGLE SPAN TWIN SPAN METERS .5 1 8 METERS 1.5 2 .5 7 23 1 1.5 2 30 9 22 29 6.5 20 28 19 A 26 5.5 4 13 12 A 11 3.5 B 10 D 8 2.5 E 7 162014 I = 4.5071(87.60 x 104) S = 1.968(32.25 x 103) 2 20 4 5 6 7 6 D 19 E 18 5.5 8 MULLION CENTERS IN FEET 5 16 15 4.5 14 12 3 6.5 21 13 2 C 22 5 1 7 23 6 0 7.5 24 17 3 C 9 MULLION HEIGHT IN FEET 4.5 14 5-1/4" (133.4) 15 METERS 5 16 MULLION HEIGHT 17 8 B 25 MULLION HEIGHT EQUAL EQUAL 18 MULLION HEIGHT IN FEET 8.5 27 6 METERS 21 4 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET ADMD020 kawneer.com © Kawneer Company, Inc., 2014 6 19 METERS 20 28 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 6.5 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 29 21 MULLION HEIGHT IN FEET 1 30 22 5 METERS .5 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 29 WIND LOAD CHARTS (1/4" INFILL) SINGLE SPAN METERS .5 1 1.5 2 7 23 TWIN SPAN A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) METERS .5 1 1.5 2 30 9 29 6.5 20 6 8 26 5.5 13 4 B 12 C 11 3.5 D 10 MULLION HEIGHT IN FEET 4.5 A 14 6-3/4" (171.5) 15 METERS 5 16 MULLION HEIGHT EQUAL EQUAL 25 17 MULLION HEIGHT 18 7 7 22 C 21 6.5 20 6 19 D 18 5.5 E 5 16 162015 2.5 8 7.5 23 17 3 E 9 B 24 I = 7.915(329.45 x 104) S = 2.635(43.18 x 103) 15 4.5 14 2 6 4 13 0 1 2 3 4 5 6 7 12 8 0 1 2 3 SINGLE SPAN 1 5 6 7 8 TWIN SPAN METERS .5 4 MULLION CENTERS IN FEET MULLION CENTERS IN FEET METERS 1.5 2 .5 7 23 1 1.5 2 30 9 29 6.5 21 20 8.5 B 27 6 19 8 26 5.5 B 13 4 C 12 3.5 11 D 10 9 2.5 8 7 2 23 4 5 6 7 162016 I = 9.594(399.33 x 104) S = 3.163(51.83 x 103) 8 MULLION CENTERS IN FEET kawneer.com 6 19 5.5 18 5 16 15 4.5 14 12 3 E 20 13 2 6.5 21 5 1 7 D 22 6 0 7.5 24 17 3 E MULLION HEIGHT IN FEET 4.5 A 14 MULLION HEIGHT EQUAL EQUAL 15 METERS 5 6-3/4" (171.5) 17 16 C 25 MULLION HEIGHT 18 MULLION HEIGHT IN FEET A 28 4 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET ADMD020 8 METERS 22 © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 8.5 27 19 5 A 28 METERS 21 MULLION HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 22 1600 Wall SystemTM2 Curtain Wall 30 DECEMBER, 2015 WIND LOAD CHARTS (1/4" INFILL) SINGLE SPAN .5 1 1.5 SINGLE SPAN A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) 162016 W/162300 METERS EC 97911-086 2 30 162016 W/162301 METERS .5 28 8.5 25 25 22 A 6.5 20 6 B 18 17 5.5 C 5 16 15 4.5 D 14 E 13 0 1 2 3 4 4 5 6 7 162016 with 162300 162016 with 162301 Ia = 9.594(399.33 x 104) Sa = 3.163(51.83 x 103) Is = 3.805(158.37 x 104) Ss = 1.669(27.35 x 103) Ia = 9.594(399.33 x 104) Sa = 3.163(51.83 x 103) Is = 5.684(236.59 x 104) Ss = 2.493(40.85 x 103) 7 23 22 6.5 21 A 20 B 18 17 5 16 D 15 4.5 E 14 4 13 12 8 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET SINGLE SPAN SINGLE SPAN 162016 W/162301/302 162016 W/162301/302/303 METERS METERS 1 5.5 C MULLION CENTERS IN FEET .5 6 19 1.5 2 .5 30 1 1.5 2 30 9 9 29 29 28 28 8.5 27 8.5 27 22 6.5 21 20 B 6 MULLION HEIGHT IN FEET A METERS 7 23 19 18 5.5 C 17 16 15 14 D 5 E 4.5 4 13 0 1 2 3 4 5 6 7 A 25 MULLION HEIGHT 7.5 24 6-3/4" (171.5) 25 8 26 162016 with 162301/302 162016 with 162301/302/303 Ia = 9.594(399.33 x 104) Sa = 3.163(51.83 x 103) Is = 7.893(328.53 x 104) Ss = 3.462(56.73 x 103) Ia = 9.594(399.33 x 104) Sa = 3.163(51.83 x 103) Is = 9.347(389.05 x 104) Ss = 4.100(67.19 x 103) 7 23 B 22 6.5 21 C 20 6 19 D 5.5 18 17 E 5 16 15 4.5 14 4 13 12 8 7.5 24 METERS 8 26 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET MULLION CENTERS IN FEET ADMD020 kawneer.com © Kawneer Company, Inc., 2014 19 7.5 24 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 21 METERS 7 MULLION HEIGHT IN FEET MULLION HEIGHT 7.5 24 23 8 26 METERS 8 26 MULLION HEIGHT IN FEET 8.5 27 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 28 MULLION HEIGHT IN FEET 2 29 27 12 1.5 9 29 12 1 30 9 GLASS HEIGHT IN FEET © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 0 kawneer.com 0 0 1 13 1 2 .5 2 3 3 4 1 4 5 8 7 5 A - 1/4" GLASS (1/4 POINT LOADING) B - 1" GLASS (1/4 POINT LOADING) 162001 METERS 2 6 5 6 1.5 6 13 12 11 10 3 9 8 2.5 7 A 7 9 7 2 B 1.5 4 3 1 2 0.5 1 8 10 A 5 3 2 0 2 12 11 3 2.5 B 2 6 4 1.5 1 1 0.5 8 0 SPAN IN FEET ADMD020 .5 0 0 1 13 1 1 SPAN IN FEET 2 METERS .5 2 3 7-1/2" (190.5) 3 1.5 3.5 10 8 7 6 A 5 4 162003 1 4 5 SPAN IN FEET 5 6 1.5 7 6 7 9 7 2 B 3 2 3.5 10 A 8 B 6 2 5 4 1.5 3 1 2 1 0.5 8 METERS 1.5 GLASS HEIGHT IN FEET EC 97911-086 METERS 0 1 GLASS HEIGHT IN FEET 13 .5 METERS 6" (152.4) METERS GLASS HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2015 1600 Wall SystemTM2 Curtain Wall 31 DEADLOAD CHARTS (TUBULAR) 6" (152.4) 162002 METERS 2 12 11 3.5 9 3 2.5 4 1.5 1 1 0.5 SPAN IN FEET 8 7-1/2" (190.5) 162004 METERS 2 12 11 3.5 3 2.5 GLASS HEIGHT IN FEET 0 0 1 13 1 2 .5 2 3 3 4 1 4 5 5 162014 METERS 2 6 1.5 9 8 6 13 12 11 A 3 9 8 2.5 7 6 2 5 1.5 4 3 1 2 0.5 1 7 7 8 10 A 7 5 3 2 0 2 12 11 3 2.5 2 6 1.5 4 1 0.5 1 8 0 SPAN IN FEET ADMD020 .5 METERS 0 0 1 13 1 1 SPAN IN FEET 2 6-3/4" (171.5) METERS .5 2 3 162015 3 1.5 4 1 4 5 5 2 3.5 12 11 3.5 10 A 9 6 1.5 9 6 3 8 2.5 7 6 2 5 1.5 4 3 1 2 0.5 7 162016 METERS 2 3.5 12 11 3.5 10 A 7 3 8 2.5 7 6 2 5 4 1.5 3 1 2 1 0.5 SPAN IN FEET 8 kawneer.com © Kawneer Company, Inc., 2014 162013 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 5-1/4" (133.4) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. DEADLOAD CHARTS (TUBULAR) METERS 10 GLASS HEIGHT IN FEET 1600 Wall SystemTM2 Curtain Wall METERS 0 1.5 GLASS HEIGHT IN FEET 0 1 METERS 13 .5 METERS GLASS HEIGHT IN FEET 32 DECEMBER, 2015 EC 97911-086 A - 1/4" GLASS (1/4 POINT LOADING) 5-1/4" (133.4) 1 SPAN IN FEET 8 6-3/4" (171.5) 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 DEADLOAD CHARTS (OPEN BACK) A - 1" GLASS (1/8 POINT LOADING) B - 1" GLASS (1/4 POINT LOADING) 162095 162091 (DOTTED) METERS 1 .5 2 1.5 10 3 A 8 2.5 7 2 6 B 5 METERS 9 1.5 4 1 3 2 2.5 8 7 B 6 2 5 1.5 4 1 3 2 0.5 1 0 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 8 162097 5 1.5 4 1 3 2 0.5 1 2.5 B 7 2 6 5 1.5 4 1 3 2 0.5 8 A 10 3 9 8 3.5 11 A 3 9 2.5 8 7 B 6 2 5 1.5 4 1 3 2 0.5 1 0 7 2 12 3.5 1 0 1.5 13 GLASS HEIGHT IN FEET 2 1 .5 METERS B GLASS HEIGHT IN FEET 2.5 8 SPAN IN FEET 7 162093 (DOTTED) 2 10 3 9 6 6 METERS 1.5 11 METERS GLASS HEIGHT IN FEET 10 5 5 6-3/4" (171.5) 12 A 6 4 A - 1/4" GLASS (1/8 POINT LOADING) B - 1/4" GLASS (1/4 POINT LOADING) METERS .5 3.5 7 3 162095 162091 (DOTTED) 2 11 kawneer.com 2 162078 REINF. 12 4 1 SPAN IN FEET 13 3 0.5 7-1/2" (190.5) 13 2 1 0 A - 1" GLASS (1/8 POINT LOADING) B - 1" GLASS (1/4 POINT LOADING) METERS 1 1.5 4 8 162094 162090 (DOTTED) 0 5 SPAN IN FEET 1.5 2 B 6 0 0 162077 REINF. 1 7 1 6" (152.4) .5 2.5 8 2 0.5 0 8 3 A 9 3 1 A - 1" GLASS (1/8 POINT LOADING) B - 1" GLASS (1/4 POINT LOADING) © Kawneer Company, Inc., 2014 10 3 A 9 3.5 11 GLASS HEIGHT IN FEET 10 GLASS HEIGHT IN FEET 11 2 12 3.5 11 METERS 3.5 1.5 13 12 12 1 .5 2 13 SPAN IN FEET Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. METERS METERS 1.5 13 0 162096 162092 (DOTTED) 0 0 1 2 3 4 5 SPAN IN FEET ADMD020 6 7 8 0 1 2 3 4 5 SPAN IN FEET 6 7 8 METERS 1 5-1/4" (133.4) 7-1/2" (190.5) 162094 162090 (DOTTED) GLASS HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 6" (152.4) A - 1/4" GLASS (1/8 POINT LOADING) B - 1/4" GLASS (1/4 POINT LOADING) METERS A - 1" GLASS (1/8 POINT LOADING) B - 1" GLASS (1/4 POINT LOADING) .5 33 1600 Wall SystemTM2 Curtain Wall 34 DECEMBER, 2015 THERMAL CHARTS EC 97911-086 Generic Project Specific U-factor Example Calculation (Percent of Glass will vary on specific products depending on sitelines) (Based on single bay of Curtain Wall/Window Wall) VISION 6'-0" D.L.O. SPANDREL 9'-0" D.L.O. VISION Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 5'-0" D.L.O. Vision Area Example Glass U-factor = 0.48 Btu/(ft2 · h · °F) Vision Area = 5(9 + 8 + 4) = 105.0 ft2 Total Area (Vision) = 5' 2-1/2" (9' 3-3/4" + 8' 2-1/2" + 4' 2-1/2") = 113.2 ft2 Percentage of Vision Glass = (Vision Area ÷ Total Area)100 = (105.0 ÷ 113.2)100 = 93% Spandrel Area Example Spandrel R-value = 15 (ft2 · h · °F)/Btu Spandrel Area = 5(6 + 3) = 45.0 ft2 Total Area (Spandrel) = 5' 2-1/2" (6' 2-1/2" + 3' 3-3/4") = 49.6 ft2 Percent of Spandrel = (Spandrel Area ÷ Total Area)100 = (49.0 ÷ 49.6)100 = 91% ADMD020 kawneer.com © Kawneer Company, Inc., 2014 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. VISION 2-1/2" Typ. SPANDREL 31'-3" 8'-0" D.L.O. 4'-0" 3'-0" D.L.O. D.L.O. 2-1/2" Typ. 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 35 THERMAL CHARTS Vision Area Chart System U-factor vs Percent of Vision Area 0.80 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. T COG U-factor 0.53 0.50 0.40 0.30 ) 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.60 Btu h·ft 2·°F System U-factor O E IGN PL S M E A D EX FOR (N 0.70 93% 0.20 95 85 90 75 80 70 Vision Area / Total Area (%) Based on a single curtain wall bay of 93% vision glass and center of glass U-factor of 0.48, System U-factor is equal to 0.53 Btu/(h·ft 2·°F) System U-factor vs Percent of Spandrel Area Spandrel R-value E IGN PL S M E A D EX FOR O 0.50 T 3.00 4.00 © Kawneer Company, Inc., 2014 5.00 0.21 0.20 0.10 91% 95 0.30 ) 11.00 15.00 19.00 30.00 0.40 Btu h·ft 2·°F System U-factor 2.00 0.60 (N Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Spandrel Area Chart 90 85 80 75 70 Spandrel Area / Total Area (%) Based on a single curtain wall bay of 91% spandrel and center of spandrel R-value of 15, system U-factor is equal to 0.21 Btu/(h·ft 2·°F) kawneer.com ADMD020 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 THERMAL CHARTS EC 97911-086 Note: Values in parentheses are metric. COG=Center of Glass. Charts are generated per AAMA 507. System U-Factor for Vision Glass 0.90 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. (5.00) 0.85 0.80 (4.50) 0.75 0.70 (4.00) 0.60 0.50 0.45 (3.00) 2 (2.73) (2.61) (2.50) (2.39) (2.27) (2.16) (2.05) (1.93) (1.82) (1.71) (1.59) (1.48) (1.37) (1.25) (1.14) Btu h·ft 2·°F 0.55 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 (3.50) ( m W·°C ) COG U-factor (2.50) 0.40 0.35 System U-factor 0.65 (2.00) 0.30 (1.50) 0.25 0.20 95 90 85 80 75 70 System U-Factors for Spandrel Glass 0.70 (4.00) 0.65 0.60 (3.50) 0.55 2.00 (0.35) 0.40 0.35 3.00 (0.53) 0.30 4.00 (0.70) 0.25 5.00 (0.88) (2.50) 2 0.45 ( m W·°C ) Spandrel R-Value System U-factor (3.00) 0.50 (2.00) (1.50) 0.20 (2.00) 0.15 11.00 (1.94) 15.00 (2.64) 19.00 (3.34) 30.00 (5.28) 0.10 (1.50) 0.05 95 90 85 80 75 70 Spandrel Area / Total Area (%) ADMD020 kawneer.com © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Vision Area / Total Area (%) Btu h·ft 2·°F 36 System VT © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. System SHGC Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2015 kawneer.com 1600 Wall SystemTM2 Curtain Wall EC 97911-086 THERMAL CHARTS COG SHGC System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area Vision Area / Total Area (%) Charts are generated per AAMA 507. COG VT System Visible Transmittance (VT) vs Percent of Vision Area Vision Ares / Total Area (%) Charts are generated per AAMA 507. ADMD020 37 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 THERMAL PERFORMANCE MATRIX (NFRC SIZE) 0.48 0.56 0.46 0.54 0.44 0.53 0.42 0.51 0.40 0.49 0.38 0.48 0.36 0.46 0.34 0.44 0.32 0.42 0.30 0.41 0.28 0.39 0.26 0.37 0.24 0.36 0.22 0.34 0.20 0.32 NOTE:For glass values that are not listed, linear interpolation is permitted. 1. 2. 3. 4. SHGC Matrix 2 U-Factors are determined in accordance with NFRC 100. SHGC and VT values are determined in accordance with NFRC 200. Glass properties are based on center of glass values and are obtained from your glass supplier. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4"). Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.75 0.73 0.90 0.81 0.70 0.68 0.85 0.77 0.65 0.64 0.80 0.72 0.60 0.59 0.75 0.68 0.55 0.55 0.70 0.63 0.50 0.50 0.65 0.59 0.45 0.46 0.60 0.54 0.40 0.41 0.55 0.50 0.35 0.37 0.50 0.45 0.30 0.32 0.45 0.41 0.25 0.28 0.40 0.36 0.20 0.23 0.35 0.32 0.15 0.19 0.30 0.27 0.10 0.14 0.25 0.23 0.05 0.10 0.20 0.18 ADMD020 kawneer.com © Kawneer Company, Inc., 2014 Overall U-Factor 4 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1" GLAZING WITH ALUMINUM PRESSURE PLATE Thermal Transmittance 1 (BTU/hr • ft 2 • °F) Glass U-Factor 3 EC 97911-086 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 38 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 39 THERMAL CHARTS Note: Values in parentheses are metric. COG=Center of Glass. Charts are generated per AAMA 507. 1" GLAZING WITH FIBERGLASS PRESSURE PLATE Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. System U-Factor for Vision Glass System U-Factor (Btu/h·ft2·°F) Vision Area / Total Area (%) © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. COG U-factor 0.48 (2.72) 0.46 (2.61) 0.44 (2.50) 0.42 (2.39) 0.40 (2.27) 0.38 (2.16) 0.36 (2.05) 0.34 (1.93) 0.32 (1.82) 0.30 (1.71) 0.28 (1.59) 0.26 (1.48) 0.24 (1.37) 0.22 (1.25) 0.20 (1.14) Notes for System U-Factor, SHGC and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values (winter conditions) and are obtained from your glass supplier. kawneer.com ADMD020 0.30 0.25 0.20 0.15 0.10 0.05 Charts are generated per AAMA 507. THERMAL CHARTS System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area Vision Area / Total Area (%) COG SHGC 0.75 0.70 0.65 0.60 0.55 0.50 0.40 0.35 ADMD020 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 Wall SystemTM2 Curtain Wall kawneer.com © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 0.45 System SHGC 40 DECEMBER, 2015 EC 97911-086 1" GLAZING WITH FIBERGLASS PRESSURE PLATE © Kawneer Company, Inc., 2014 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 0.45 0.40 0.35 kawneer.com System VT Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2015 1600 Wall SystemTM2 Curtain Wall EC 97911-086 0.30 0.25 0.20 0.15 0.10 0.05 Charts are generated per AAMA 507. ADMD020 41 THERMAL CHARTS 1" GLAZING WITH FIBERGLASS PRESSURE PLATE System Visible Transmittance (VT) vs Percent of Vision Area Vision Ares / Total Area (%) COG VT 0.75 0.70 0.65 0.60 0.55 0.50 1600 Wall SystemTM2 Curtain Wall DECEMBER, 2015 EC 97911-086 THERMAL PERFORMANCE MATRIX (NFRC SIZE) Overall U-Factor 4 0.48 0.54 0.46 0.53 0.44 0.51 0.42 0.49 0.40 0.48 0.38 0.46 0.36 0.44 0.34 0.42 0.32 0.41 0.30 0.39 0.28 0.37 0.26 0.36 0.24 0.34 0.22 0.32 0.20 0.31 NOTE:For glass values that are not listed, linear interpolation is permitted. 1. 2. 3. 4. SHGC Matrix 2 U-Factors are determined in accordance with NFRC 100. SHGC and VT values are determined in accordance with NFRC 200. Glass properties are based on center of glass values and are obtained from your glass supplier. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4"). Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.75 0.73 0.75 0.68 0.70 0.69 0.70 0.63 0.65 0.64 0.65 0.59 0.60 0.60 0.60 0.54 0.55 0.55 0.55 0.50 0.50 0.51 0.50 0.45 0.45 0.46 0.45 0.41 0.40 0.42 0.40 0.36 0.35 0.37 0.35 0.32 0.30 0.33 0.30 0.27 0.25 0.28 0.25 0.23 0.20 0.24 0.20 0.18 0.15 0.19 0.15 0.14 0.10 0.15 0.10 0.09 0.05 0.10 0.05 0.05 ADMD020 kawneer.com © Kawneer Company, Inc., 2014 Glass U-Factor 3 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1" GLAZING WITH FIBERGLASS PRESSURE PLATE Thermal Transmittance 1 (BTU/hr • ft 2 • °F) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 42