VSMY98545DS www.vishay.com Vishay Semiconductors High Power Infrared Emitting Diode, 850 nm, Surface Emitter Technology FEATURES • Package type: surface mount • Double stack technology • Package form: high power SMD with lens • Dimensions (L x W x H in mm): 3.85 x 3.85 x 2.24 DESCRIPTION As part of the SurfLightTM portfolio, the VSMY98545DS is an infrared, 850 nm emitting diode based on surface emitter technology with high radiant power and high speed, molded in low thermal resistance SMD package with lens. A 42 mil chip provides outstanding radiant intensity and allows DC operation of the device up to 1 A. Superior ESD characteristics are ensured by an integrated Zener diode. • • • • • • Peak wavelength: λp = 850 nm Zener diode for ESD protection up to 2 kV High radiant power High radiant intensity Angle of half intensity: ϕ = ± 45° Designed for high drive currents: up to 1 A (DC) and up to 5 A pulses • • • • Low thermal resistance: RthJP = 10 K/W Floor life: 168 h, MSL 3, acc. J-STD-020 Lead (Pb)-free reflow soldering Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • Infrared illumination for CMOS cameras (CCTV) Illumination for cameras (3D gaming) Machine vision 3D TV PRODUCT SUMMARY COMPONENT Ie (mW/sr) ϕ (deg) λp (nm) tr (ns) VSMY98545DS 600 ± 45 850 30 Note • Test conditions see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VSMY98545DS Tape and reel MOQ: 600 pcs, 600 pcs/reel High power with lens Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) SYMBOL VALUE Reverse voltage PARAMETER TEST CONDITION VR 5 UNIT V Forward current IF 1 A A Peak forward current tp/T = 0.5, tp = 100 μs IFM 2 Surge forward current tp = 100 μs IFSM 5 A Power dissipation PV 3.6 W Junction temperature Tj 125 °C Operating temperature range Tamb -40 to +110 °C Storage temperature range Tstg -40 to +125 °C Acc. figure 10, J-STD-20 Tsd 260 °C Acc. J-STD-051, soldered on PCB RthJP 10 K/W Soldering temperature Thermal resistance junction/pin Rev. 1.0, 08-May-15 Document Number: 84236 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY98545DS www.vishay.com Vishay Semiconductors 1 3.5 IF - Forward Current (A) PV - Power Dissipation (W) 4 3 2.5 2 RthJA = 10 K/W 1.5 1 0.8 0.6 RthJA = 10 K/W 0.4 0.2 0.5 0 0 0 20 40 60 80 100 120 0 Tamb - Ambient Temperature (°C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 2 - Forward Current Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Forward voltage TEST CONDITION SYMBOL IF = 1 A, tp = 20 ms VF MIN. TYP. MAX. UNIT 3.2 3.6 V IF = 5 A, tp = 100 μs VF 4.6 V Temperature coefficient of VF IF = 1 A TKVF -2.2 mV/K Reverse current VR = 5 V IR Radiant intensity Radiant power Temperature coefficient of φe 10 IF = 1 A, tp = 20 ms Ie IF = 5 A, tp = 100 μs Ie 2800 IF = 1 A, tp = 20 ms φe 1070 IF = 1 A TKφe 300 900 mW/sr mW/sr mW %/K ϕ Angle of half intensity 600 μA ± 45 deg Peak wavelength IF = 1 A λp Spectral bandwidth IF = 1 A Δλ 50 nm Temperature coefficient of λp IF = 1 A TKλp 0.3 nm/K Rise time IF = 1 A tr 30 ns Fall time IF = 1 A tf 30 ns Rev. 1.0, 08-May-15 830 850 870 nm Document Number: 84236 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY98545DS www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 000 Ie - Radiant Intensity (mW/sr) 10 000 IF - Forward Current (mA) tp = 100 μs 1000 100 tp = 100 μs 1000 100 10 1 2.0 3.0 4.0 5.0 100 VF - Forward Voltage (V) IF = 1000 mA tp = 20 ms VF - Forward Voltage (V) 3.70 3.60 3.50 3.40 3.30 3.20 3.10 3.00 -60 -40 -20 0 20 40 60 80 Fig. 6 - Radiant Intensity vs. Forward Current Ie, rel - Relative Radiant Intensity (%) 4.00 3.80 150 IF = 1000 mA tp = 20 ms 140 130 120 110 100 90 80 70 60 50 100 -50 Tamb - Ambient Temperature (°C) 120 IF = 1000 mA tp = 20 ms 110 105 100 95 90 85 80 -60 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 5 - Relative Forward Voltage vs. Ambient Temperature Rev. 1.0, 08-May-15 -25 0 25 50 75 100 Tamb - Ambient Temperature (°C) Fig. 7 - Relative Radiant Intensity vs. Ambient Temperature Ie, rel - Relative Radiant Intensity (%) VF, rel - Relative Forward Voltage (%) Fig. 4 - Forward Voltage vs. Ambient Temperature 115 10 000 IF - Forward Current (mA) Fig. 3 - Forward Current vs. Forward Voltage 3.90 1000 100 IF = 1000 mA 90 80 70 60 50 40 30 20 10 0 700 750 800 850 900 950 1000 λ - Wavelength (nm) Fig. 8 - Relative Radiant Intensity vs. Wavelength Document Number: 84236 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY98545DS www.vishay.com 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0.6 0.4 0.2 ϕ - Angular Displacement Ie, rel - Relative Radiant Intensity 0° Vishay Semiconductors 0 Fig. 9 - Relative Radiant Intensity vs. Angular Displacement TAPING DIMENSIONS in millimeters Notes • Empty component pockets sealed with top cover tape. • 7 inch reel - 600 pieces per reel. • The maximum number of consecutive missing lamps is two. • In accordance with ANSI/EIA 481-1-A-1994 specifications. 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 Cathode Ø 1.50 + 0.10 1.75 ± 0.10 12.00 +- 0.30 0.10 5.50 ± 0.05 Ø 1.50 + 0.25 Rev. 1.0, 08-May-15 Document Number: 84236 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY98545DS www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Notes • Tolerance is ± 0.10 mm (0.004") unless otherwise noted. • Specifications are subject to change without notice. Rev. 1.0, 08-May-15 Document Number: 84236 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSMY98545DS www.vishay.com SOLDER PROFILE Vishay Semiconductors DRYPACK Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. FLOOR LIFE Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 168 h Conditions: Tamb < 30 °C, RH < 60 % Moisture sensitivity level 3, acc. to J-STD-020B DRYING Fig. 10 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020 Rev. 1.0, 08-May-15 In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 °C (+ 5 °C), RH < 5 %. Document Number: 84236 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000