For more information, please visit the product page. rev. page 1 of 3 date 01/2008 DESCRIPTION: incremental shaft type encoder PART NUMBER: NSB ELECTRICAL SPECIFICATIONS square wave A, B, Z phase, inverse A, B, Z phase ≤50 mA ≤50 KHz 4.5 V ~ 5.5 V dc, 10.8 V ~ 13.2 V dc ≤20 mA 0.5V max 100,200,250,256,300,360,400,500 1μs max “H” “L”1 output resolution (ppr) waveform rise/fall time ed output waveform output signals current consumption frequency response supply voltage output current output voltage MECHANICAL SPECIFICATIONS 1.96N 1.96N 4.9 x 10-4 N·m max 1x104 rad/s2 1x10-8kg·m2 6000 RPM 50G, 294 m/s2, 11 ms, 3 times each on XYZ 10 ~ 50 Hz, double amplitude 1.5mm 20g max nt in u max shaft load, radial: axial: starting torque angular acceleration moment of inertia max rotational speed shock resistance vibration proof weight ENVIRONMENTAL SPECIFICATIONS NOTE: -10° to +60° C -20° to +80° C RH 85% max, non-collecting IP50 co operating temp storage temp humidity degree of protection is 1. at maximum output current ELECTRICAL CONNECTIONS Description D Pin# Color of Lead Wire 1 2 3 4 5 Red Black Blue White Yellow Power Source 0V Common Signal A Signal B Signal Z DF3-5S-2C DF3-4S-2C DF3-3S-2C 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 3 Signals' Use 2 Signals' Use 1 Signals' Use For more information, please visit the product page. rev. page 2 of 3 date 01/2008 DESCRIPTION: incremental shaft type encoder PART NUMBER: NSB ORDERING INSTRUCTIONS NSB – – CA – – ed *015 = 150mm Cable Length 030 = 300mm (custom) 05 : 5V Power Source 1 : Back Cable Out-let in u Cable Out-let Style 12 : 12V 2 : Side Cable Out-let Resolution Output Mode : Open Collector Output 1 : 1 Single Signals 2 : AB90˚ Phase Difference 2M : AB90˚ Phase Difference + Zero Signal 256 P/R 300 P/R 360 P/R 400 400 P/R 500 500 P/R co CIRCUIT CONNECTIONS 256 300 360 nt 100 100 P/R 200 200 P/R 250 250 P/R Vcc Signal is 0V D OUTPUT WAVEFORM CW Rotating Toward Clockwise Viewed from an Arrow Rising point of A-Signal is always at one point while Z-Signal is at H-Level in CW. P P= Signal A a b c 1 1Resolution d a, b, c, d = Signal B P P ± 4 8 h = P ± 0.75P h Signal Z hmin hmax Wave Ratio (Duty); 50 ± 25 (%) 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 PC FILE NAME: NSB 7 0.276 COPYRIGHT 2007 BY CUI INC. Cable Color Output Type Cable Color Output Type M2 Depth 4 (2 PLCS) i - - - 0V common Power - Black Red - - Signal A Blue Signal Z Signal B - - - Yellow White - 12 0.472 - - - - - - - - - - - - d e DESCRIPTION NEW DRAWING JMS DRAWN BY: NSB APPROVED BY: Incremental Encoder PART NO. TITLE: UNITS: 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TOLERANCE: ±0.3mm UNLESS OTHERWISE SPECIFIED u n it 18 0.709 n o 18 0.709 c s 150 [5.909] cable D 2.5 0.098 REV. A A 2:1 SCALE: MM [INCHES] REV: RoHS DATE 9/11/2007 For more information, please visit the product page.