For more information, please visit the product page. rev. page 1 of 3 date 04/2009 DESCRIPTION: incremental shaft type encoder PART NUMBER: NSC ELECTRICAL SPECIFICATIONS output waveform output signals current consumption square wave A, B, Z phase, inverse A, B, Z phase ≤80 mA (voltage output), ≤60 mA (open collector), ≤150 mA (line driver output) ≤150 KHz 4.5 V ~ 5.5 V dc, 10.8 V ~ 13.2 V dc (voltage output, open collector) 21.6 V ~ 26.4 V dc (open collector 24 V) 4.75 V~ 5.25 V dc (line driver) ≤20 mA VCC-1V (voltage output) 2.5V or more (line driver) 0.5V max 36, 50, 60, 100, 150, 200, 250, 300, 360, 400, 500, 512, 600, 800, 1000, 1024, 1500 1μ or less, 200 ns or max (line driver only) “H” “L”1 output resolution (ppr) waveform rise/fall time MECHANICAL SPECIFICATIONS nt 9.8N 4.9N 9.8 x 10-4 N·m max 1x105 rad/s2 2x10-7kg·m2 6000 RPM 294 m/s2, 11 ms, 3 times each on XYZ 10 ~ 50 Hz, double amplitude 1.5mm 60g max co max shaft load, radial: axial: starting torque angular acceleration moment of inertia max rotational speed shock resistance vibration proof weight in u output current output voltage ed frequency response supply voltage ENVIRONMENTAL SPECIFICATIONS NOTE: -10° to +70° C -30° to +80° C RH 85% max, non-collecting IP50 is operating temp storage temp humidity degree of protection 1. at maximum output current D ELECTRICAL CONNECTIONS 2M 2MC Color of Lead Wire Red Black Green or Blue White Yellow Shielding Braid Description Power Source 0V Common Signal A Signal B Signal Z NC 2MD Color of Lead Wire Red Black Green Blue Shielding Braid Description Power Source 0V Common Signal A Signal A NC Color of Lead Wire White Gray Yellow Orange 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 Description Signal B Signal B Signal Z Signal Z For more information, please visit the product page. rev. page 2 of 3 date 04/2009 DESCRIPTION: incremental shaft type encoder PART NUMBER: NSC ORDERING INSTRUCTIONS – 2M – Power Source Resolution 04 400P/R 36P/R 05 500P/R 50P/R 60P/R 0512 512P/R 06 600P/R 100P/R 08 800P/R 150P/R 10 1000P/R 200P/R 250P/R 1024 1024P/R 15 1500P/R 300P/R 360P/R 05: 5V 12: 12V 24: 24V 050 : 500mm(Standard) 100 : 1000mm Output Mode 300 : 3000mm No Indication : Voltage Output C : Open Collector Output D : Line Driver Output AB90˚ Phase Difference + Zero Signal Signals nt 2M Cable Length Only for Mode C Except 24V mode Please Ask for Alternative Specifications. CIRCUIT CONNECTIONS 2MC Vcc co Vcc –0 0 in u 0036 005 006 01 015 02 025 03 036 – ed NSC – 2MD Vcc 2kΩ Signal Signal Signal Reverse Signal 0V 0V is 0V D OUTPUT WAVEFORM CW Rotating Toward Clockwise Viewed from an Arrow Rising point of A-Signal is always at one point while Z-Signal is at H-Level in CW. P Signal A P= a b c Sig A 1 1Resolution Sig A d Signal B a, b, c, d = h P P ± 4 8 P < 3P = h < = 2 2 Sig B Sig B Sig Z Signal Z hmin hmax Wave Ratio (Duty); 50 ± 25 (%) Sig Z 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 PC FILE NAME: NSC C 4.5 0.177 COPYRIGHT 2009 BY CUI INC. Cable Color Output Type Cable Color Output Type C Signal Z - - 0V common Power Orange Black Red 22.0 0.866 - - - Signal A Signal A - Blue Green 28.0 1.102 - - NC Shielding Braid - - Signal B White Gray - - Signal B 2.0 0.079 - - Signal Z Yellow ZRJ DRAWN BY: NSC APPROVED BY: INCREMENTAL ENCODER PART NO. TITLE: UNITS: 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TOLERANCE: ±0.3mm UNLESS OTHERWISE SPECIFIED d e added shaft dimension, dimension updates C u n it M3 Depth 4 (2 PLCS) n o 12.0 0.472 C 5.0 0.197 c s i D 30.0 1.181 15.0 0.591 DESCRIPTION NEW DRAWING updated dimensions REV. A B C 1:1 SCALE: MM [INCHES] REV: RoHS 11/11/2009 DATE 9/11/2007 4/3/2009 For more information, please visit the product page.