LPS6225

Document 554-1
Shielded Power Inductors – LPS6225
• Low DCR; high current; shielded construction
• Perfect for backlight applications
Designer’s Kit C349 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 309 – 331 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth
Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5 Irms (A)6
DCR SRF
2
3
4
Inductance max typ 10% 20% 30% 20°C40°C
Part number1 ± 20% (µH)(Ohms) (MHz) drop drop drop rise rise
LPS6225-122MR_
LPS6225-222MR_
LPS6225-332MR_
LPS6225-472MR_
LPS6225-682MR_
1.2
2.2
3.3
4.7
6.8
0.040
1785.35.45.41.11.65
0.045
1003.94.04.11.01.40
0.055
683.53.53.61.01.35
0.065
533.03.13.20.90
1.30
0.095
402.62.72.80.90
1.30
LPS6225-103MR_ 10
LPS6225-153MR_ 15
LPS6225-223MR_ 22
LPS6225-333MR_ 33
LPS6225-473MR_ 47
0.105
352.12.12.20.90
1.30
0.135
232.12.22.20.85
1.20
0.175
171.41.51.60.80
1.10
0.260
141.11.21.20.65
0.90
0.360
100.98
1.01.00.60
0.80
LPS6225-683MR_ 68
LPS6225-104MR_ 100
LPS6225-124MR_ 120
LPS6225-154MR_ 150
LPS6225-224MR_ 220
0.420
0.610
0.750
0.920
1.30
9.60.580.610.620.570.74
7.70.480.510.520.470.64
7.40.420.450.460.430.58
6.40.390.410.420.400.54
5.00.320.340.350.370.50
LPS6225-334MR_ 330
LPS6225-474MR_ 470
LPS6225-684MR_ 680
LPS6225-105MR_1000
LPS6225-155MR_1500
2.00
2.60
4.00
6.00
9.00
3.80.260.270.280.280.39
3.20.220.230.240.240.37
2.80.180.190.200.180.26
2.30.150.160.170.150.24
1.80.120.130.130.130.20
LPS6225-185MR_1800
LPS6225-225MR_2200
LPS6225-335MR_3300
LPS6225-475MR_ 4700
LPS6225-565MR_ 5600
11.7
13.5
21.0
30.0
36.0
1.70.110.120.120.110.14
1.30.100.100.110.110.13
1.10.099
0.100.110.080
0.11
0.900.0860.0960.10 0.0750.090
0.720.0830.0900.0960.0700.090
LPS6225-685MR_ 6800
LPS6225-825MR_ 8200
LPS6225-106MR_10000
43.0
54.0
70.0
0.700.0800.0860.0890.0650.080
0.690.0790.0860.0880.0600.075
0.680.0750.0840.0870.0600.065
1. Please specify termination and packaging codes:
LPS6225-106MRC
Termination:R=RoHS compliant matte tin over
nickel over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (750 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (2500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient. This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Document 554-1 Revised 09/02/15
Document 554-2
Shielded SMT Power Inductors – LPS6225 Series
Typical L vs Frequency
Typical L vs Current
10000
10000
3300 µH
1000 µH
330 µH
100 µH
100
33 µH
10 µH
10
1
0.01
0.1
Current (A)
1
10
0.236 ±0.003*
6,00 ±0,076
XXX X
330 µH
100 µH
100
33 µH
10 µH
10
1
0.01
1
0.1
10
Frequency (MHz)
Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth
NOTE NEW PART ORIENTATION Parts are rotated 90° in the
packaging tape compared to previous versions of this product.
0.236 ±0.003 *
6,00 ±0,076
Winding
direction
NEW
0.094 ±0.004*
2,40 ± 0,10
OLD
123
Internal
code
123
123
Dash
number
1000 µH
1000
Inductance (µH)
1000
Inductance (µH)
3300 µH
123
123
123
Recommended
Land Pattern
0.079
2,00
0.165
4,20
0.039 typ
1,00
0.260 0.167
6,60 4,25
0.039 typ
1,00
are of the case not including
* Dimensions
the termination. For maximum overall
dimensions including the termination, add
0.005 in / 0,13 mm.
For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch / 0,13 mm).
0.165
4,20
0.071
1,80
0.079
2,00
0.167
4,25
0.260
6,60
Dimensions are in
inches
mm
Document 554-2 Revised 09/02/15