LPS6235

Document 587-1
Shielded Power Inductors – LPS6235
• Low DCR; high current; shielded construction
• Perfect for backlight applications
Designer’s Kit C345 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 460 – 480 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 350/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.68 mm pocket depth
Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5 Irms (A)6
DCR SRF
2
3
4
Inductance max typ 10% 20% 30% 20°C40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS6235-682MR_ 6.8 0.075
552.62.72.81.30
1.90
LPS6235-822MR_ 8.2 0.095
482.52.62.71.30
1.85
LPS6235-103MR_ 10.0 0.100
372.32.42.51.28
1.80
LPS6235-123MR_ 12.0 0.110
291.92.22.31.25
1.75
LPS6235-153MR_ 15.0 0.125
251.92.02.01.22
1.70
LPS6235-183MR_ 18.0 0.140
241.71.81.91.20
1.65
LPS6235-223MR_ 22.0 0.145
241.61.71.71.10
1.60
LPS6235-333MR_ 33.0 0.180
161.31.41.51.00
1.30
LPS6235-473MR_ 47.0 0.245
131.11.21.20.80
1.15
LPS6235-563MR_ 56.0 0.280
121.01.01.10.75
1.07
LPS6235-683MR_ 68.0 0.34510.80.900.940.960.731.00
LPS6235-823MR_ 82.0 0.31510.00.460.520.550.720.95
LPS6235-104MR_ 100.0 0.375 9.00.460.520.540.700.90
LPS6235-124MR_ 120.0 0.435 8.30.440.480.510.600.80
LPS6235-154MR_ 150.0 0.535 7.30.370.430.450.530.73
LPS6235-224MR_ 220.0 0.820 5.60.310.360.370.450.64
LPS6235-334MR_ 330.0 1.20 4.40.260.290.300.400.50
LPS6235-474MR_ 470.0 1.60 3.60.220.250.260.320.43
LPS6235-564MR_ 560.0 2.00 3.10.200.220.230.290.38
LPS6235-684MR_ 680.0 2.20 2.80.170.190.210.280.37
LPS6235-824MR_ 820.0 2.70 2.50.160.180.190.260.33
LPS6235-105MR_1000.0 3.40 2.20.140.170.180.240.30
LPS6235-155MR_1500.0 4.60 1.90.120.130.140.190.26
LPS6235-185MR_1800.0 5.42 1.70.110.120.130.180.23
LPS6235-225MR_2200.0 6.70 1.50.090
0.110.110.160.22
LPS6235-335MR_ 3300.0
9.50
1.1 0.0800.0900.10 0.14 0.180
LPS6235-475MR_ 4700.0 14.5
0.940.0700.0770.0840.11 0.150
LPS6235-565MR_ 5600.0 16.4
0.860.0600.0700.0800.10 0.130
LPS6235-685MR_ 6800.0 21.4
0.800.0570.0650.0690.0900.120
LPS6235-825MR_ 8200.0 24.5
0.700.0520.0600.0670.0850.115
LPS6235-106MR_10000.0 29.5
0.610.0500.0550.0600.0750.095
1. Please specify termination and packaging codes:
LPS6235-106MRC
Termination:R=RoHS compliant matte tin over
nickel over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (350 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (1500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient. This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Document 587-1 Revised 09/02/15
Document 587-2
Shielded Power Inductors – LPS6235 Series
Typical L vs Current
Typical L vs Frequency
10000
10000
3300 µH
1000 µH
330 µH
100 µH
100
33 µH
10 µH
10
1
0.01
0.1
Current (A)
100 µH
100
33 µH
10 µH
1
10
1
0.01
1
0.1
10
Frequency (MHz)
Packaging 350/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.68 mm pocket depth
NOTE NEW PART ORIENTATION Parts are rotated 90° in the
packaging tape compared to previous versions of this product.
0.236 ±0.003*
6,00 ±0,076
Winding
direction
NEW
0.138
max*
3,50
OLD
123
Internal
code
123
123
Dash
number
330 µH
10
0.236 ±0.003*
6,00 ±0,076
XXX X
1000 µH
1000
Inductance (µH)
1000
Inductance (µH)
3300 µH
123
123
123
Recommended
Land Pattern
0.079
2,00
0.165
4,20
0.039 typ
1,00
0.260 0.167
6,60 4,25
0.039 typ
1,00
are of the case not including
* Dimensions
the termination. For maximum overall
dimensions including the termination, add
0.005 in / 0,13 mm.
For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch / 0,13 mm).
0.165
4,20
0.071
1,80
0.079
2,00
0.167
4,25
0.260
6,60
Dimensions are in
inches
mm
Document 587-2 Revised 09/02/15