LPS5015

Document 585-1
Shielded Power Inductors – LPS5015
• Very low DCR; excellent current handling
• 5.0 × 5.0 mm footprint; less than 1.5 mm tall
Designer’s Kit C350 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 102 – 107 mgAmbient temperature –40°C to +85°C with
(40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5 Irms (A)6
DCR SRF
2
3
4
Inductance max typ 10% 20% 30% 20°C40°C
Part number1 ±20% (µH) (Ohms)(MHz) drop drop drop rise rise
LPS5015-102MR_ 1.0 0.050
1833.63.83.91.90
2.65
LPS5015-132MR_ 1.3 0.065
1502.52.62.81.70
2.35
LPS5015-182MR_ 1.8 0.075
1282.62.82.91.50
2.15
LPS5015-222MR_ 2.2 0.090
1162.42.62.71.40
2.00
LPS5015-332MR_ 3.3 0.125881.92.02.01.30
1.80
LPS5015-472MR_ 4.7 0.150731.61.71.81.20
1.62
LPS5015-562MR_ 5.6 0.175671.61.61.61.10
1.45
LPS5015-682MR_ 6.8 0.225571.31.41.50.90
1.25
LPS5015-822MR_ 8.2 0.280491.31.31.40.85
1.05
LPS5015-103MR_ 10 0.300441.21.31.30.80
0.95
LPS5015-123MR_ 12 0.350401.01.11.20.75
0.84
LPS5015-153MR_ 15
0.360 38 0.800.840.860.730.84
LPS5015-183MR_ 18
0.550 35 0.750.770.800.700.83
LPS5015-223MR_ 22
0.675 31 0.700.730.750.600.82
LPS5015-333MR_ 33
0.750 24 0.550.590.600.500.70
LPS5015-473MR_ 47
1.00 18 0.460.480.490.450.57
LPS5015-563MR_ 56
1.13 17 0.400.430.450.400.52
LPS5015-683MR_ 68
1.45 15 0.330.380.390.350.47
LPS5015-104MR_ 100
1.95 12 0.300.330.340.300.42
LPS5015-124MR_ 120
2.50 10 0.250.280.300.270.37
LPS5015-154MR_ 150
3.40
9.3
0.230.250.260.250.33
LPS5015-224MR_ 220
4.50
7.3
0.200.210.220.220.29
LPS5015-334MR_ 330
7.40
5.7
0.150.170.180.170.22
LPS5015-474MR_ 470
7.50
4.9
0.120.120.130.160.21
LPS5015-564MR_ 560
8.50
4.3
0.100.110.120.140.190
LPS5015-684MR_ 680 10.6
4.0
0.100.110.110.130.175
LPS5015-105MR_ 1000
15.0
3.20.0800.0900.0930.10 0.150
LPS5015-155MR_ 1500
25.0
2.50.0800.0860.0880.0900.140
LPS5015-185MR_ 1800
28.0
2.20.0780.0830.0860.0850.130
LPS5015-225MR_ 2200
36.0
2.10.0720.0780.0800.0650.090
1. Please specify termination and packaging codes:
LPS5015-225MRC
Termination:R=RoHS compliant matte tin over nickel
over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape 1000 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 parts per full
reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified inductance
drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient. This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Document 585-1 Revised 09/02/15
Document 585-2
Shielded Power Inductors – LPS5015 Series
Typical L vs Frequency
Typical L vs Current
10000
10000
3300 µH
3300 µH
1000 µH
330 µH
100 µH
100
33 µH
10 µH
10
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
330 µH
100 µH
100
33 µH
10 µH
10
3.3 µH
3.3 µH
1
0.01
1
0.1
10
Frequency (MHz)
0.189 ±0.003*
4,80 ±0,076
XXX X
0.01
0.1
Current (A)
1
10
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth
NOTE NEW PART ORIENTATION Parts are rotated 90° in the
packaging tape compared to previous versions of this product.
0.189 ±0.003*
4,80 ±0,076
Winding
direction
NEW
0.0551 ±0.004 *
1,4 ±0,1
OLD
123
Internal
code
123
123
Dash
number
1
123
123
123
Recommended
Land Pattern
0.060
1,50
0.134
3,40
0.039 typ
1,00
0.217
5,51
0.0665
1,689
0.039 typ
1,00
are of the case not including
* Dimensions
the termination. For maximum overall
dimensions including the termination, add
0.005 in / 0,13 mm.
For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch / 0,13 mm).
0.134
3,40
0.134
3,40
0.060
1,52
0.134
3,40
0.217
5,51
Dimensions are in
inches
mm
Document 585-2 Revised 09/02/15