AOT2N60/AOTF2N60 600V,2A N-Channel MOSFET General Description Product Summary The AOT2N60 & AOTF2N60 have been fabricated using an advanced high voltage MOSFET process that is designed to deliver high levels of performance and robustness in popular AC-DC applications. By providing low RDS(on), Ciss and Crss along with guaranteed avalanche capability these parts can be adopted quickly into new and existing offline power supply designs. VDS ID (at VGS=10V) 700V@150℃ 2A RDS(ON) (at VGS=10V) < 4.4Ω 100% UIS Tested 100% Rg Tested For Halogen Free add "L" suffix to part number: AOT2N60L & AOTF2N60L TO-220 G D Top View D G S TO-220F G D S S Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter AOT2N60 Symbol Drain-Source Voltage VDS 600 Gate-Source Voltage ±30 Continuous Drain Current VGS TC=25°C TC=100°C AOTF2N60 V 2 ID Units V 2* 1.7 1.7* A Pulsed Drain Current C IDM Avalanche Current C IAR 2 A Repetitive avalanche energy C EAR 60 mJ Single plused avalanche energy G Peak diode recovery dv/dt TC=25°C Power Dissipation B Derate above 25oC Junction and Storage Temperature Range Maximum lead temperature for soldering purpose, 1/8" from case for 5 seconds Thermal Characteristics Parameter Maximum Junction-to-Ambient A,D EAS dv/dt 120 5 mJ V/ns W 8 PD 31 0.25 TJ, TSTG -55 to 150 W/ oC °C 300 °C TL Symbol RθJA RθCS AOT2N60 65 AOTF2N60 65 Units °C/W 0.5 1.7 -4 °C/W °C/W Maximum Case-to-sink A Maximum Junction-to-Case RθJC * Drain current limited by maximum junction temperature. Rev5: July 2010 74 0.6 www.aosmd.com Page 1 of 6 AOT2N60/AOTF2N60 Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter Conditions Min ID=250µA, VGS=0V, TJ=25°C 600 Typ Max Units STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage BVDSS /∆TJ Breakdown Voltage Temperature Coefficient IDSS Zero Gate Voltage Drain Current IGSS ID=250µA, VGS=0V, TJ=150°C 700 V ID=250µA, VGS=0V 0.56 V/ oC VDS=600V, VGS=0V 1 VDS=480V, TJ=125°C 10 Gate-Body leakage current VDS=0V, VGS=±30V VGS(th) Gate Threshold Voltage VDS=5V ID=250µA ±100 3 µA 4 4.5 nΑ V 4.4 Ω 1 V RDS(ON) Static Drain-Source On-Resistance VGS=10V, ID=1A 3.6 gFS Forward Transconductance VDS=40V, ID=1A 3.5 VSD Diode Forward Voltage IS=1A,VGS=0V 0.79 S IS Maximum Body-Diode Continuous Current 2 A ISM Maximum Body-Diode Pulsed Current 8 A DYNAMIC PARAMETERS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance VGS=0V, VDS=25V, f=1MHz VGS=0V, VDS=0V, f=1MHz SWITCHING PARAMETERS Qg Total Gate Charge VGS=10V, VDS=480V, ID=2A 215 270 325 pF 23 29 35 pF 2.2 2.8 3.4 pF 3.5 4.4 6.6 Ω 9.5 11.4 nC Qgs Gate Source Charge 1.9 2.3 nC Qgd Gate Drain Charge 4.7 5.6 nC tD(on) Turn-On DelayTime 17.2 tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time Body Diode Reverse Recovery Time Qrr ns VGS=10V, VDS=300V, ID=2A, RG=25Ω 14.3 ns 27 ns IF=2A,dI/dt=100A/µs,VDS=100V 154 185 Body Diode Reverse Recovery Charge IF=2A,dI/dt=100A/µs,VDS=100V 0.80 1 17 ns ns µC A. The value of R θJA is measured with the device in a still air environment with T A =25°C. B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C, Ratings are based on low frequency and duty cycles to keep initial TJ =25°C. D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of T J(MAX)=150°C. The SOA curve provides a single pulse rating. G. L=60mH, IAS=2A, VDD=150V, RG=25Ω, Starting TJ=25°C THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev5: July 2010 www.aosmd.com Page 2 of 6 AOT2N60/AOTF2N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 5 10 10V VDS=40V -55°C 4 6.5V ID(A) ID (A) 3 6V 125°C 1 2 1 25°C VGS=5.5V 0 0.1 0 5 10 15 20 25 30 2 4 VDS (Volts) Fig 1: On-Region Characteristics 6.5 8 10 2.5 Normalized On-Resistance 6.0 5.5 RDS(ON) (Ω ) 6 VGS(Volts) Figure 2: Transfer Characteristics 5.0 4.5 VGS=10V 4.0 3.5 3.0 VGS=10V ID=1A 2 1.5 1 0.5 0 0 1 2 3 4 5 -100 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage -50 0 50 100 150 200 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature 1.0E+01 1.2 40 1.0E-01 IS (A) BVDSS (Normalized) 1.0E+00 1.1 1 125°C 1.0E-02 25°C 1.0E-03 0.9 1.0E-04 1.0E-05 0.8 -100 -50 0 50 100 150 200 TJ (°C) Figure 5:Break Down vs. Junction Temperature Rev5: July 2010 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 AOT2N60/AOTF2N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 15 1000 VDS=480V ID=2A Ciss Capacitance (pF) VGS (Volts) 12 9 6 100 Coss 10 Crss 3 0 1 0 3 6 9 12 15 0.1 Qg (nC) Figure 7: Gate-Charge Characteristics 10 1 10 VDS (Volts) Figure 8: Capacitance Characteristics 100 10 10µs 10µs RDS(ON) limited 100µs 1ms 10ms DC 0.1 ID (Amps) ID (Amps) 1 RDS(ON) limited 1 100µs 1ms 10ms 0.1 0.01 0.1s 1s DC TJ(Max)=150°C TC=25°C TJ(Max)=150°C TC=25°C 0.01 1 10 100 1000 1 VDS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area for AOT2N60 (Note F) 10 100 1000 VDS (Volts) Figure 10: Maximum Forward Biased Safe Operating Area for AOTF2N60 (Note F) Current rating ID(A) 2.5 2.0 1.5 1.0 0.5 0.0 0 Rev5: July 2010 25 50 75 100 125 TCASE (°C) Figure 11: Current De-rating (Note B) 150 www.aosmd.com Page 4 of 6 AOT2N60/AOTF2N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS Zθ JC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TC+PDM.ZθJC.RθJC RθJC=1.7°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 0.01 Single Pulse 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 12: Normalized Maximum Transient Thermal Impedance for AOT2N60 (Note F) Zθ JC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TC+PDM.ZθJC.RθJC RθJC=4°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 0.01 Single Pulse 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 13: Normalized Maximum Transient Thermal Impedance for AOTF2N60 (Note F) Rev5: July 2010 www.aosmd.com Page 5 of 6 AOT2N60/AOTF2N60 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + VDC - VDC DUT Qgs Vds Qgd - Vgs Ig Charge Res istive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs + VDC 90% Vdd - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf t off Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L EAR= 1/2 LI Vds 2 AR BVDSS Vds Id + Vgs Vgs VDC - Rg Vdd I AR Id DUT Vgs Vgs Diode Recovery Tes t Circuit & Waveforms Qrr = - Idt Vds + DUT Vgs Vds - Isd Vgs Ig Rev5: July 2010 L Isd + Vdd trr dI/dt IRM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6