P6FG-xxxxE/Z2:1(H30)LF PMB-SERIES Rev.04-2009 1 Watt 2:1 Wide Input Reg. Single and Dual Output 1 - 3 kV DC I/O Isolation DIP16 case Contin. Short Circuit Protection Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de [email protected] The PMB 1 Watt series is a family of cost effective 1 W single and dual output DC/DC converters with an optional control Pin (SIP). These converters are encapsulated in an ultra miniature SIP8 or DIP16 plastic or metal case. High performance features: continuous / long time short circuit protection with automatic restart and tight line / load regulation, high efficiency operation and output voltage accuracy of ±2% maximum. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ 2:1 Wide Input (see table) Capacitor 35 mA pk-pk Output Specifications Voltage Accuracy Short Circuit Protection Line Regulation Load Regulation (25% - 100%) Ripple and Noise (20Mhz bandwidth) Temperature Coefficient ± 2% Indefinite (Automatic Recovery) ± 0.5% ± 1% 80 mV pk-pk ± 0.02% / °C General Specifications I/O Isolation Voltage (3 sec.) I/O Isolation Capacity I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) 1000 VDC (3000 VDC optional)* 60 pF 1000 M Ohm 100 - 650 kHz 95% rel H > 2.732 Mhrs Physical Specifications Case Material Potting Material Weight Non Conductive Black Plastic (UL94V-0 rated) Epoxy (UL94V-0 rated) ~ 6 g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +85°C (ambient) 100°C -40 to +125°C Free Air Convection Soldering 260°C, max. (1.5mm from case 10s.) PMB-Series – P6FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/4 Selection Guide Single Output A) ) ) m A) d (m ad ( (mA ad (mA a o ) d o L a L C ll Lo n. D F)² C) Lo t Mi t Fu d (u (VD e (V Full No ) n n a g t t e e e o a n n % r r g t y( rre rre lta or L Vol C ur Cur ienc t Vo t Cu put Cu acit put put pu t In p u Inpu In O ut O ut O ut Effic C ap Order # SINGLE OUTPUT P6FG-053R3E2:1LF P6FG-0505E2:1LF P6FG-0509E2:1LF P6FG-0512E2:1LF P6FG-0515E2:1LF P6FG-0524E2:1LF P6FG-123R3E2:1LF P6FG-1205E2:1LF P6FG-1209E2:1LF P6FG-1212E2:1LF P6FG-1215E2:1LF P6FG-1224E2:1LF P6FG-243R3E2:1LF P6FG-2405E2:1LF P6FG-2409E2:1LF P6FG-2412E2:1LF P6FG-2415E2:1LF P6FG-2424E2:1LF P6FG-483R3E2:1LF P6FG-4805E2:1LF P6FG-4809E2:1LF P6FG-4812E2:1LF P6FG-4815E2:1LF P6FG-4824E2:1LF 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 15 15 40 55 55 70 15 15 15 15 15 15 8 8 8 8 8 8 6 6 6 6 6 6 298 298 285 285 285 294 119 115 108 108 108 114 59 57 55 55 55 55 31 30 29 29 29 30 3.3 5 9 12 15 24 3.3 5 9 12 15 24 3.3 5 9 12 15 24 3.3 5 9 12 15 24 76 50 28 21 17 10 76 50 28 21 17 10 76 50 28 21 17 10 76 50 28 21 17 10 303 200 111 83 67 42 303 200 111 83 67 42 303 200 111 83 67 42 303 200 111 83 67 42 67 67 70 70 70 68 70 72 77 77 77 73 70 72 75 75 75 75 66 68 70 70 70 68 3300 3300 470 470 470 220 3300 3300 470 470 470 220 3300 3300 470 470 470 220 3300 3300 470 470 470 220 If you need other specifications, please enquire. *OPTIONS: 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P6FG-2424E2:1H30LF for 3kV) PMB-Series – P6FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Dual Output ) A) ) (m A d (m mA) ad (mA d ( a a o ) d o in. L Loa ull L uF)² VDC ll L o DC) nt F ) nt M ad ( t No rent Fu ge ( e (V e e o n a r % r g t L r r ( l e a r u u r o t r r y l o V C C ie n c t Vo t Cu put Cu acit put put put In p u In p u In O ut Out O ut Effic Cap Order # DUAL OUTPUT P6FG-053R3Z2:1LF P6FG-0505Z2:1LF P6FG-0509Z2:1LF P6FG-0512Z2:1LF P6FG-0515Z2:1LF P6FG-0524Z2:1LF P6FG-123R3Z2:1LF P6FG-1205Z2:1LF P6FG-1209Z2:1LF P6FG-1212Z2:1LF P6FG-1215Z2:1LF P6FG-1224Z2:1LF P6FG-243R3Z2:1LF P6FG-2405Z2:1LF P6FG-2409Z2:1LF P6FG-2412Z2:1LF P6FG-2415Z2:1LF P6FG-2424Z2:1LF P6FG-483R3Z2:1LF P6FG-4805Z2:1LF P6FG-4809Z2:1LF P6FG-4812Z2:1LF P6FG-4815Z2:1LF P6FG-4824Z2:1LF 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 15 15 20 20 40 70 15 15 15 15 15 40 8 8 8 8 8 20 6 6 6 6 6 12 285 270 270 266 285 298 119 115 109 109 112 124 59 59 54 54 55 59 30 30 28 27 29 30 ±3.3 ±5.0 ±9.0 ±12.0 ±15.0 ±24.0 ±3.3 ±5.0 ±9.0 ±12.0 ±15.0 ±24.0 ±3.3 ±5.0 ±9.0 ±12.0 ±15.0 ±24.0 ±3.3 ±5.0 ±9.0 ±12.0 ±15.0 ±24.0 ±38 ±25 ±14 ±10 ±8 ±5 ±38 ±25 ±14 ±10 ±8 ±5 ±38 ±25 ±14 ±10 ±8 ±5 ±38 ±25 ±14 ±10 ±8 ±5 ±152 ±100 ±56 ±42 ±33 ±21 ±152 ±100 ±56 ±42 ±33 ±21 ±152 ±100 ±56 ±42 ±33 ±21 ±152 ±100 ±56 ±42 ±33 ±21 70 74 74 75 70 67 70 72 76 76 74 67 70 70 76 77 75 70 70 70 74 76 72 70 ±1000 ±1000 ±220 ±220 ±220 ±100 ±1000 ±1000 ±220 ±220 ±220 ±100 ±1000 ±1000 ±220 ±220 ±220 ±100 ±1000 ±1000 ±220 ±220 ±220 ±100 If you need other specifications, please enquire. *OPTIONS: 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P6FG-2424Z2:1H30LF for 3kV) PMB-Series – P6FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/4 Package / Pinning / Derating 10.16 (0.40) 1 0.50 (0.02) 17.78 (0.70) 8 All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. Bottom View 9 16 2.54 (0.10) DIP16 – PLASTIC CASE 0.50 (0.02) 14.00 (0.55) PEAK 10.16 (0.40) Modelcode Datecode 23.40 (0.92) 3.05 (0.12) PIN CONNECTIONS # SINGLE DUAL 1 - Vin - Vin 2 - Vin - Vin 6 N.C. Common 8 N.C. - Vout 9 +Vout +Vout 11 - Vout Common 15 +Vin +Vin 16 +Vin +Vin (same pinning for 3kV) App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH ² = Tested by nominal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. PMB-Series – P6FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 4/4