Product Sheet

V I S H AY I N T E R T E C H N O L O G Y, I N C .
IGBT
PT and FS Technologies
Trench IGBT Platform Featuring PT (Punch Through)
and FS (Field Stop) Technologies in Bare Die
KEY BENEFITS
• Offering includes one Trench PT and six Trench FS IGBTs
–– Low collector-to-emitter voltages down to 1.07 V at 50 % rated current and +125 °C provide
extremely low conduction losses
–– Fast and soft turn-on and turn-off reduce switching losses and power consumption
• Soft turn-off reduces peak overvoltages, extends power ratings, and simplifies circuit layouts
–– Trench PT devices optimized for low switching frequencies to 1 kHz
–– Trench FS IGBTs offer 6 µs short circuit rating and high operating temperature to +175 °C
–– Optimized for use with Vishay’s new FRED Pt® Gen 4 Ultrafast soft diodes
APPLICATIONS
• Motor drives, UPS, solar inverters, and welding machine inverters
• Single- and three-phase inverters, power factor correction (PFC) circuits, and full- and half-bridge
DC/DC converters
RESOURCES
• Datasheets: see next page for list of datasheets featured in this product sheet
• For technical questions, contact [email protected]
• Material categorization: For definitions of compliance, please see http://www.vishay.com/doc?99912
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT0432-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
IGBT
PT and FS Technologies
Trench IGBT Platform Featuring PT (Punch Through)
and FS (Field Stop) Technologies in Bare Die
Vishay Semiconductors’ Trench PT IGBTs, featuring a negative temperature coefficient for low collector-to-emitter voltages
down to 1.07 V at 50 % rated current and +125 °C, provide extremely low conduction losses for applications with low switching
frequencies to 1 kHz. With their Trench construction, the devices offer a smaller size than planar IGBTs, providing higher current
density and lower thermal resistance, without compromising performance and reliability.
Vishay’s Trench FS devices reduce conduction losses with their low collector-to-emitter saturation voltage down to 1.4 V at full
current and 25 °C, while also providing fast and soft switching for reduced power consumption and low turn-on and turn-off
losses. In addition, the devices’ soft turn-off reduces peak overvoltages, extends power ratings, and simplifies circuit layouts.
Offering a robust design, the FS IGBTs feature a high operating temperature to +175 °C, while their 6 µs short circuit rating time
allows for safe and reliable operation under extreme load and failure conditions. The devices’ low and positive temperature
coefficient of the saturation voltage enables simple paralleling.
Both Trench PT and Trench FS IGBTs are optimized for use in power modules with Vishay’s new FRED Pt Gen 4 Ultrafast soft
diodes, where the devices will offer exceptionally low EMI and plug-and-play reliability.
IGBT PLATFORM TECHNOLOGY
VCE (V)
IC (A)
VCE(ON) /
VCESAT (V)
TECHNOLOGY
DIE SIZE
(MM)
DIE TYPE
VS-GC200A060LC
600
200
1.34
Trench PT
12.7 x 10.3
Sawn
VS-GC200A060LB
600
200
1.34
Trench PT
12.7 x 10.3
Unsawn
VS-GC200C060TC
600
200
1.45
Trench FS
10.3 x 9.8
Sawn
VS-GC200C060TB
600
200
1.45
Trench FS
10.3 x 9.8
Unsawn
VS-GC200C065TC
650
200
1.6
Trench FS
10.3 x 9.8
Sawn
VS-GC200C065TB
650
200
1.6
Trench FS
10.3 x 9.8
Unsawn
VS-GC030C060TC
600
30
1.5
Trench FS
3.5 x 4.3
Sawn
VS-GC030C060TB
600
30
1.5
Trench FS
3.5 x 4.3
Unsawn
VS-GC030C065TC
650
30
1.55
Trench FS
3.5 x 4.3
Sawn
VS-GC030C065TB
650
30
1.55
Trench FS
3.5 x 4.3
Unsawn
VS-GC240C060TC
600
240
1.4
Trench FS
12.6 x 10.3
Sawn
VS-GC240C060TB
600
240
1.4
Trench FS
12.6 x 10.3
Unsawn
VS-GC240C065TC
650
240
1.55
Trench FS
12.6 x 10.3
Sawn
VS-GC240C065TB
650
240
1.55
Trench FS
12.6 x 10.3
Unsawn
PART NUMBER
For more information on Vishay Semiconductors Trench PT IGBTs, please contact [email protected]
PRODUCT SHEET
2/2
VMN-PT0432-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000