PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com LOW POWER 2-FREQUENCY SELECT OSCILLATOR SERIES „LPO2“ 1.0—110.0 MHz FEATURES APPLICATIONS + Low Power High Performance Oscillator for Low Cost + Excellent long time reliability + The world’s lowest power programmable oscillator with 3.2 mA + + + + + + typical active current + Selectable Output Frequency: F0 or F1 where F1 = F0/2, F0/3, F0/4, or + + + + + + F0/8 LVCMOS/LVTTL compatible output Outstanding reliability enhancing MTBF Ideal for applications with common and related frequencies Outstanding mechanical robustness for portable applications Ultra short lead time Pb-free, RoHS and REACH compliant / MSL1@260° USB (48 MHz, 24 MHz or 12 MHz) Ethernet (50 MHz or 25 MHz) Audio (24.576 MHz or 12.288 MHz) Video (54 MHz and 27 MHz) MCU clocking (66 MHz and 33 MHz) etc. GENERAL DATA PARAMETER AND CONDITIONS SYMBOL MIN. TYP. MAX. UNIT CONDITION f 1 - 110 MHz F0 2 - 110 MHz The actual output frequency of the CLK pin is selected by the F1 1 - 55 MHz FS (frequency select pin) to be either F 0 or F1. F_stab -20 - +20 PPM Inclusive of: Initial stability, operating temperature, -25 - +25 PPM rated power supply voltage change, load change, shock -30 - +30 PPM -50 - +50 PPM ± 20 PPM available in extended commercial temperature only Ag -1.0 - -1.0 PPM 1st Year at 25°C VDD 1.71 1.8 1.89 V 2.25 2.5 2.75 V 2.52 2.8 3.08 V 2.97 3.3 3.63 V - 3.7 4.1 mA No load condition, f = 20 MHz, VDD = 2.5 V, 2.8 V or 3.3 V - 3.2 3.5 mA No load condition, f = 20 MHz, VDD = 1.8 V 45 50 55 % All VDDs. f ≤ 75 MHz 40 50 60 % All VDDs. f > 75 MHz - 1.0 2.0 ns 20% - 80% VDD=2.5V or 2.8V, 3.3V, 15pF load - 1.3 2.5 ns 20% - 80% VDD=1.8V, 15pF load VOH 90% - - VDD IOH = -4 mA (VDD = 3.3 V) IOH = -3 mA (VDD = 2.8 V and VDD = 2.5 V) IOH = -2 mA (VDD = 1.8 V) VOL - - 10% VDD IOL = 4 mA (VDD = 3.3 V) IOL = 3 mA (VDD = 2.8 V and Vdd = 2.5 V) IOL = 2 mA (VDD = 1.8 V) Ld - - 15 pF At maximum frequency and supply voltage. Contact Petermann-Technik for higher output load option. FREQUENCY Frequency Range FREQUENCY STABILITY Frequency Stability Aging and vibration. SUPPLY VOLTAGE AND CURRENT CONSUMPTION Supply Voltage Current Consumption IDD LVCMOS OUTPUT CHARACTERISTICS Duty Cycle Rise/Fall Time Output Voltage High Output Voltage Low Output load DC Tr, Tf CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 1 OF 6 I SPEC 01 I REV.00 I NOVEMBER 2014 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com GENERAL DATA (continued) PARAMETER AND CONDITIONS SYMBOL MIN. TYP. MAX. UNIT CONDITION OPERATING TEMPERATURE RANGE Operating Temperature Range T_use Storage Temperature Range T_stor -20 – +70 °C -40 -55 Extended Commercial – +85 °C – +125 °C Storage Industrial INPUT CHARCTERISTICS AND STARTUP/RESUME TIMING Input Voltage High VIH 70% – – VDD Pin 1, OE or ST Input Voltage Low VIL – – 30% VDD Pin 1, OE or ST Startup Time T_osc – – 10 ms Measured from the time VDD reaches its rated minimum value Resume Time T_resume – 3.0 4 ms Measured from the time ST pin crosses 50% threshold 4.0 ps f = 75 MHz, VDD = 2.5 V, 2.8 V or 3.3 V JITTER RMS Period Jitter T_jitt RMS Phase Jitter (random) T_phj - - - 6.5 ps f = 75 MHz, VDD = 1.8 V - 0.6 - ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz, VDD = 2.5 V, 2.8 V, or 3.3 V - 0.8 - ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz, VDD = 1.8 V EXCELLENT RELIABILITY DATA MTBF 500 million hours Shock Resistance 10.000 g Vibration Resistance 70 g PIN DESCRIPTION TABLES PIN MAP PIN # 1 FUNCTIONALITY PIN CONNECTION H or Open[1]: output frequency F0 1 FS L: output frequency F1 2 GND FS 3 CLK 4 VDD Note: 1. In 1.8 V mode, a resistor of <100 kΩ between OE pin and VDD is recommended. TIMING DIAGRAMS FIGURE 1. STARTUP TIMING (ST/=OE MODE) 90%VDD, 2.5/2.8/3.3V parts 95%VDD, 1.8V parts VDD Pin 4 Voltage T_start CLK Output T_start: Time to start from power-off CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 2 OF 6 I SPEC 01 I REV.00 I NOVEMBER 2014 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com DIMENSIONS AND PATTERNS RECOMMENDED LAND PATTERN (UNIT:MM) (2) PACKAGE SIZE – DIMENSIONS (UNIT:MM) 2.5 X 2.0 X 0.75 MM #1 1.9 1.00 #3 #3 #1 #2 #2 1.0 1.1 1.5 #4 0.5 2.5±0.10 2.0±0.10 #4 1.1 0.75±0.05 0.75 RECOMMENDED LAND PATTERN (UNIT:MM) PACKAGE SIZE – DIMENSIONS (UNIT:MM) 3.2 X 2.5 X 0.75 MM #1 2.2 2.1 #3 #3 #1 #2 #2 1.2 0.9 1.9 #4 0.7 3.2±0.15 2.5±0.15 #4 1.4 0.75±0.05 0.9 RECOMMENDED LAND PATTERN (UNIT:MM) PACKAGE SIZE – DIMENSIONS (UNIT:MM) 5.0 X 3.2 X 0.75 MM #3 #1 #2 #2 1.1 1.6 2.2 #4 1.15 1.5 0.75±0.05 #1 2.54 2.39 #3 0.8 5.0±0.15 3.2±0.15 #4 Note: 2. A capacitor value of 0.1 µF between VDD and GND is recommended. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 3 OF 6 I SPEC 01 I REV.00 I NOVEMBER 2014 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com DIMENSIONS AND PATTERNS RECOMMENDED LAND PATTERN (UNIT:MM) PACKAGE SIZE – DIMENSIONS (UNIT:MM)(3) 7.0 X 5.0 X 0.90 MM #3 #2 #2 2.0 2.6 2.1 No connect(3) 3.81 #4 #1 1.4 2.2 0.90±0.10 #1 5.08 5.08 1.7 #3 1.1 7.0±0.15 5.0±0.15 #4 REFLOW SOLDER PROFILE Note: 3.The 7.0x5.0mm package has NO center pad, do not connect. Used by factory. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 4 OF 6 I SPEC 01 I REV.00 I NOVEMBER 2014 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com ORDERING INFORMATION OSCILLATOR FAMILY LPO2 SUPPLY VOLTAGE “18“ “25“ “28“ “33“ TEMPERATURE RANGE for 1.8V for 2.5V for 2.8V for 3.3V FREQUENCY 2.000000 to 110.00000 MHz “C” for 0 +70°C “D” for -10 +70°C “M” for -20 +70°C “W” for -40 +85°C LPO2-33-2520-25-W-25.000MHz-T-A FREQUENCY STABILITY “25” for ±25 PPM “30” for ±30 PPM “50” for ±50 PPM “100” for ±100 PPM PACKAGE SIZE PACKING METHOD “B” for BULKS or TUBES “T” for TAPE & REEL OUTPUT FREQUENCY OPTIONS “2520” for 2.5 X 2.0 mm “3225” for 3.2 X 2.5 mm “5032” for 5.0 X 3.2 mm “7050” for 7.0 X 5.0 mm “A” = F0 and F0/2 “B” = F0 and F0/3 “C” = F0 and F0/4 “D” = F0 and F0/8 EXAMPLE: LPO2-33-2520-25-W-25.000MHz-T-A PLEASE INDICATE YOUR REQUIRED PARAMETERS TABLE 1. FREQUENCY SELECT OPTIONS VS. MIMIMUM OUTPUT FREQUENCY OUTPUT FREQUENCY OPTION MINIMUM FREQUENCY (F0) A = F0 and F0/2 2 MHz B = F0 and F0/3 3 MHz C = F0 and F0/4 4 MHz D = F0 and F0/8 8 MHz SAMPLES ARE AVAILABLE WITHIN A SHORT DELIVERY PERIOD! CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 5 OF 6 I SPEC 01 I REV.00 I NOVEMBER 2014 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com PREMIUM QUALITY BY PETERMANN-TECHNIK OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH. THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS. © PETERMANN-TECHNIK GmbH 2014. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 6 OF 6 I SPEC 01 I REV.00 I NOVEMBER 2014