P OWER TRANS FOR MER CHASSIS MOUNT : Autotransformer N-500MG Electrical Specifications (@25ºC) 1. Maximum Power: 500 VA 2. Input Voltage: 115 V, 50 / 60 Hz 3. Output Voltage: 230V + 5% 4. Full Secondary Load: 2.20 Amps RMS Description: The N-500MG is part of the line of Auto-Transformers that are single winding transformers in which the primary coil is a fraction of the entire winding for voltage step-up. This causes part of the power to be transferred conductively through the windings, rather than all of the power being transferred by induction. A Safety: These units are designed with 1500V isolation between the winding and the core. Materials and construction are rated for Class B insulation system. C Dimensions: Unit: In inches A B C D E 4.625 3.875 4.750 3.00 3.625 Weight: 6.60 lbs Mounting Holes: .203 x .375 Connection: 6 ft. long cord with NEMA 5-15P Plug, 1 ft. long cord with NEMA 6-15P socket. B Schematic: D BLK FN BLK 115 V WHT WHT E 230 V GRN ST GRN RoHS Compliance: As of manufacturing date February 2005, all standard products meet the requirements of 2011/65/EU, known as the RoHS initiative. * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 Publish Date: December 4, 2013