Analog Power AM3407PE P-Channel 20-V (D-S) MOSFET Key Features: • Low rDS(on) trench technology • Low thermal impedance • Fast switching speed VDS (V) -20 PRODUCT SUMMARY rDS(on) (mΩ) 34 @ VGS = -4.5V 48 @ VGS = -2.5V ID(A) -5 -3 Typical Applications: • Battery Powered Instruments • Portable Computing • Mobile Phones • GPS Units and Media Players TSOP6 Drain: 1,2,5,6 Gate: 3 Source: 4 ABSOLUTE MAXIMUM RATINGS (TA = 25°C UNLESS OTHERWISE NOTED) Parameter Symbol Limit VDS Drain-Source Voltage -20 VGS Gate-Source Voltage ±12 TA=25°C -5 ID Continuous Drain Current a TA=100°C -3.3 IDM Pulsed Drain Current b -20 a I -1 Continuous Source Current (Diode Conduction) S TA=25°C PD 1.40 Power Dissipation a TJ, Tstg -55 to 150 Operating Junction and Storage Temperature Range Maximum Junction-to-Ambient a THERMAL RESISTANCE RATINGS Parameter t <= 10 sec Steady State Symbol Maximum 62.5 RθJA 110 Units V A A W °C Units °C/W Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature © Preliminary 1 Publication Order Number: DS-AM3407PE-2010 Analog Power AM3407PE Electrical Characteristics Parameter Symbol Gate-Source Threshold Voltage Gate-Body Leakage VGS(th) IGSS Zero Gate Voltage Drain Current IDSS On-State Drain Current ID(on) Drain-Source On-Resistance rDS(on) Forward Transconductance Diode Forward Voltage gfs VSD Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Test Conditions Static VDS = VGS, ID = -250 uA VDS = 0 V, VGS = ±12 V VDS = -16 V, VGS = 0 V VDS = -16 V, VGS = 0 V, TJ = 85°C VDS = -5 V, VGS = -4.5 V VGS = -4.5 V, ID = -5 A VGS = -2.5 V, ID = -3 A VDS = -15 V, ID = -5 A IS = -1.0 A, VGS = 0 V Dynamic VDS = -10 V, VGS = -4.5 V, ID = -5 A VDD = -10 V, RL = 10 Ω, ID = -1 A, VGEN = -4.5 V, RGEN = 6 Ω VDS = -10 V, VGS = 0 V, f = 1 MHz Min Typ Max -20 ±10 -1 -30 10 Unit V uA uA A 34 48 10 -0.7 16 4 5 6 12 75 38 1450 200 165 mΩ S V nC ns pF Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. © Preliminary 2 Publication Order Number: DS-AM3407PE-2010 Analog Power AM3407PE Typical Electrical Characteristics © Preliminary 3 Publication Order Number: DS-AM3407PE-2010 Analog Power AM3407PE Typical Electrical Characteristics © Preliminary 4 Publication Order Number: DS-AM3407PE-2010 Analog Power AM3407PE Package Information TSOP6 Symbol A A1 A2 D E E1 c b e e1 L © Preliminary Dimensions In Millimeters MIN. MAX. --1.45 --0.15 0.9 1.3 2.90 BSC 2.890 BSC 1.5 1.7 0.08 0.25 0.3 0.5 0.95BSC 1.90BSC 0.3 0.6 5 Publication Order Number: DS-AM3407PE-2010