BUK7610-100B N-channel TrenchMOS standard level FET 6 July 2012 Product data sheet 1. Product profile 1.1 General description Standard level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology. This product has been designed and qualified to the appropriate AEC standard for use in automotive critical applications. 1.2 Features and benefits • Low conduction losses due to low on-state resistance • Q101 compliant • Suitable for standard level gate drive sources • Suitable for thermally demanding environments due to 175 °C rating 1.3 Applications • 12 V, 24 V and 42 V loads • Automotive systems • General purpose power switching • Motors, lamps and solenoids 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 175 °C - - 100 V ID drain current VGS = 10 V; Tmb = 25 °C; Fig. 1; Fig. 3 - - 75 A Ptot total power dissipation Tmb = 25 °C; Fig. 2 - - 300 W VGS = 10 V; ID = 25 A; Tj = 25 °C; - 8.6 10 mΩ - 22 - nC - - 629 mJ [1] Static characteristics RDSon drain-source on-state resistance Fig. 11; Fig. 12 Dynamic characteristics QGD gate-drain charge VGS = 10 V; ID = 25 A; VDS = 80 V; Tj = 25 °C; Fig. 13 Avalanche ruggedness EDS(AL)S non-repetitive drainsource avalanche energy ID = 75 A; Vsup ≤ 100 V; RGS = 50 Ω; VGS = 10 V; Tj(init) = 25 °C; unclamped Scan or click this QR code to view the latest information for this product BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET [1] Continuous current is limited by package. 2. Pinning information Table 2. Pinning information Pin Symbol Description Simplified outline 1 G gate 2 D drain[1] 3 S source mb D mounting base; connected to drain Graphic symbol D mb G 1 S mbb076 2 3 D2PAK (SOT404) [1] It is not possible to make connection to pin 2. 3. Ordering information Table 3. Ordering information Type number Package BUK7610-100B Name Description Version D2PAK plastic single-ended surface-mounted package (D2PAK); 3 leads SOT404 (one lead cropped) 4. Marking Table 4. Marking codes Type number Marking code BUK7610-100B BUK7610-100B 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 175 °C - 100 V VDGR drain-gate voltage RGS = 20 kΩ - 100 V VGS gate-source voltage -20 20 V ID drain current [1] - 110 A [2] - 75 A [2] - 75 A - 438 A Tmb = 25 °C; VGS = 10 V; Fig. 1; Fig. 3 Tmb = 100 °C; VGS = 10 V; Fig. 1 IDM peak drain current BUK7610-100B Product data sheet Tmb = 25 °C; pulsed; tp ≤ 10 µs; Fig. 3 All information provided in this document is subject to legal disclaimers. 6 July 2012 © NXP B.V. 2012. All rights reserved 2 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET Symbol Parameter Conditions Min Max Unit Ptot total power dissipation Tmb = 25 °C; Fig. 2 - 300 W Tstg storage temperature -55 175 °C Tj junction temperature -55 175 °C [1] - 110 A [2] - 75 A pulsed; tp ≤ 10 µs; Tmb = 25 °C - 438 A ID = 75 A; Vsup ≤ 100 V; RGS = 50 Ω; - 629 mJ Source-drain diode IS source current ISM Tmb = 25 °C peak source current Avalanche ruggedness EDS(AL)S non-repetitive drain-source avalanche energy [1] [2] VGS = 10 V; Tj(init) = 25 °C; unclamped Current is limited by power dissipation chip rating. Continuous current is limited by package. 03ng70 120 Capped at 75 A due to package ID (A) Pder (%) 80 80 40 40 0 Fig. 1. 0 50 100 150 Tmb (°C) BUK7610-100B Product data sheet 0 200 Normalized continuous drain current as a function of mounting base temperature 03na19 120 Fig. 2. 0 100 150 Tmb (°C) 200 Normalized total power dissipation as a function of mounting base temperature All information provided in this document is subject to legal disclaimers. 6 July 2012 50 © NXP B.V. 2012. All rights reserved 3 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET 003aag933 103 ID (A) Limit RDSon = V DS / ID tp =10 µ s 102 100 µ s 10 Capped at 75 A due to package DC 1 ms 1 10-1 Fig. 3. 10 ms 100 ms 1 102 10 103 VDS (V) Safe operating area; continuous and peak drain currents as a function of drain-source voltage 6. Thermal characteristics Table 6. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit Rth(j-mb) thermal resistance from junction to mounting base Fig. 4 - - 0.5 K/W Rth(j-a) thermal resistance from junction to ambient - 50 - K/W mounted on printed-circuit board ; minimum footprint 03ng69 1 Zth(j-mb) (K/W) 10- 1 δ = 0.5 0.2 0.1 0.05 10- 2 0.02 P Single Shot 10- 3 10- 6 Fig. 4. 10- 5 δ= tp 10- 4 10- 3 10- 2 tp T t T 10- 1 tp (s) 1 Transient thermal impedance from junction to mounting base as a function of pulse duration BUK7610-100B Product data sheet All information provided in this document is subject to legal disclaimers. 6 July 2012 © NXP B.V. 2012. All rights reserved 4 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET 7. Characteristics Table 7. Characteristics Symbol Parameter Conditions Min Typ Max Unit drain-source breakdown voltage ID = 0.25 mA; VGS = 0 V; Tj = 25 °C 100 - - V ID = 0.25 mA; VGS = 0 V; Tj = -55 °C 89 - - V gate-source threshold voltage ID = 1 mA; VDS = VGS; Tj = 175 °C; 1 - - V 2 3 4 V - - 4.4 V VDS = 100 V; VGS = 0 V; Tj = 25 °C - 0.02 1 µA VDS = 100 V; VGS = 0 V; Tj = 175 °C - - 500 µA VGS = 20 V; VDS = 0 V; Tj = 25 °C - 2 100 nA VGS = -20 V; VDS = 0 V; Tj = 25 °C - 2 100 nA VGS = 10 V; ID = 25 A; Tj = 25 °C; - 8.6 10 mΩ - - 25 mΩ Static characteristics V(BR)DSS VGS(th) Fig. 10 ID = 1 mA; VDS = VGS; Tj = 25 °C; Fig. 10 ID = 1 mA; VDS = VGS; Tj = -55 °C; Fig. 10 IDSS IGSS RDSon drain leakage current gate leakage current drain-source on-state resistance Fig. 11; Fig. 12 VGS = 10 V; ID = 25 A; Tj = 175 °C; Fig. 11; Fig. 12 Dynamic characteristics QG(tot) total gate charge ID = 25 A; VDS = 80 V; VGS = 10 V; - 80 - nC QGS gate-source charge Tj = 25 °C; Fig. 13 - 18 - nC QGD gate-drain charge - 22 - nC Ciss input capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz; - 5080 6773 pF Coss output capacitance Tj = 25 °C; Fig. 14 - 677 812 pF Crss reverse transfer capacitance - 168 230 pF td(on) turn-on delay time VDS = 30 V; RL = 1.2 Ω; VGS = 10 V; - 33 - ns tr rise time RG(ext) = 10 Ω; Tj = 25 °C - 45 - ns td(off) turn-off delay time - 120 - ns tf fall time - 36 - ns LD internal drain inductance from drain lead 6 mm from package to centre of die ; Tj = 25 °C - 4.5 - nH from upper edge of drain mounting base to centre of die ; Tj = 25 °C - 2.5 - nH from source lead to source bond pad ; Tj = 25 °C - 7.5 - nH LS internal source inductance BUK7610-100B Product data sheet All information provided in this document is subject to legal disclaimers. 6 July 2012 © NXP B.V. 2012. All rights reserved 5 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET Symbol Parameter Conditions Min Typ Max Unit Source-drain diode VSD source-drain voltage IS = 40 A; VGS = 0 V; Tj = 25 °C; Fig. 15 - 0.85 1.2 V trr reverse recovery time IS = 20 A; dIS/dt = -100 A/µs; - 69 - ns Qr recovered charge VGS = -10 V; VDS = 30 V; Tj = 25 °C - 212 - nC 03ng76 350 ID (A) 300 10 RDSon (mΩ) 6.5 8 03ng75 11 7 20 10 250 200 5.5 9 150 100 8 50 0 Fig. 5. VGS = 4.5 V 0 2 4 6 8 VDS (V) 7 10 Output characteristics: drain current as a Fig. 6. function of drain-source voltage; typical values 03aa35 10- 1 ID (A) min 10- 2 typ max 40 10- 5 20 Fig. 7. 4 VGS (V) 0 6 Sub-threshold drain current as a function of gate-source voltage BUK7610-100B Product data sheet VGS (V) 20 03ng73 80 10- 4 2 15 100 gfs (S) 60 0 10 Drain-source on-state resistance as a function of gate-source voltage; typical values 10- 3 10- 6 5 Fig. 8. 0 40 60 ID (A) 80 Forward transconductance as a function of drain current; typical values All information provided in this document is subject to legal disclaimers. 6 July 2012 20 © NXP B.V. 2012. All rights reserved 6 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET 03ng74 100 03aa32 5 ID (A) VGS(th) (V) 80 4 60 3 40 2 max typ min Tj = 175 °C 1 20 Tj = 25 °C 0 Fig. 9. 0 2 4 0 - 60 6 VGS (V) Transfer characteristics: drain current as a function of gate-source voltage; typical values 180 03ng41 2.1 9 7 8 Tj (°C) a 6.5 11 120 2.8 VGS = 6 V 12 60 Fig. 10. Gate-source threshold voltage as a function of junction temperature 03ng77 13 RDSon (mΩ) 0 10 1.4 10 0.7 9 8 0 50 100 150 ID (A) 0 -60 200 Fig. 11. Drain-source on-state resistance as a function of drain current; typical values BUK7610-100B Product data sheet 0 60 120 Tj (°C) 180 Fig. 12. Normalized drain-source on-state resistance factor as a function of junction temperature All information provided in this document is subject to legal disclaimers. 6 July 2012 © NXP B.V. 2012. All rights reserved 7 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET 03ng72 10 03ng78 7000 C (pF) 6000 VGS (V) 8 Ciss 5000 VDD = 14 V 6 Coss VDD = 80 V 4000 3000 4 2000 Crss 2 1000 0 0 20 40 60 QG (nC) 0 10- 1 80 Fig. 13. Gate-source voltage as a function of gate charge; typical values IS (A) 1 10 VDS (V) 102 Fig. 14. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values 03ng71 100 80 60 40 20 Tj = 175 °C 0 Tj = 25 °C 0.0 0.2 0.4 0.6 0.8 1.0 VSD (V) Fig. 15. Reverse diode current as a function of reverse diode voltage; typical value BUK7610-100B Product data sheet All information provided in this document is subject to legal disclaimers. 6 July 2012 © NXP B.V. 2012. All rights reserved 8 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET 8. Package outline SOT404 Plastic single-ended surface-mounted package (D2PAK); 3 leads (one lead cropped) A A1 E mounting base D1 D HD 2 1 Lp 3 c b e e Q 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 b c D max. D1 E e Lp HD Q mm 4.50 4.10 1.40 1.27 0.85 0.60 0.64 0.46 11 1.60 1.20 10.30 9.70 2.54 2.90 2.10 15.80 14.80 2.60 2.20 OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 05-02-11 06-03-16 SOT404 Fig. 16. D2PAK (SOT404) BUK7610-100B Product data sheet All information provided in this document is subject to legal disclaimers. 6 July 2012 © NXP B.V. 2012. All rights reserved 9 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. 9. Legal information 9.1 Data sheet status Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Document status [1][2] Product status [3] Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] [2] [3] Definition Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Please consult the most recently issued document before initiating or completing a design. The term 'short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 9.2 Definitions Preview — The document is a preview version only. The document is still subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 9.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. BUK7610-100B Product data sheet Suitability for use in automotive applications — This NXP Semiconductors product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. All information provided in this document is subject to legal disclaimers. 6 July 2012 © NXP B.V. 2012. All rights reserved 10 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 9.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. Adelante, Bitport, Bitsound, CoolFlux, CoReUse, DESFire, EZ-HV, FabKey, GreenChip, HiPerSmart, HITAG, I²C-bus logo, ICODE, I-CODE, ITEC, Labelution, MIFARE, MIFARE Plus, MIFARE Ultralight, MoReUse, QLPAK, Silicon Tuner, SiliconMAX, SmartXA, STARplug, TOPFET, TrenchMOS, TriMedia and UCODE — are trademarks of NXP B.V. HD Radio and HD Radio logo — are trademarks of iBiquity Digital Corporation. BUK7610-100B Product data sheet All information provided in this document is subject to legal disclaimers. 6 July 2012 © NXP B.V. 2012. All rights reserved 11 / 12 BUK7610-100B NXP Semiconductors N-channel TrenchMOS standard level FET 10. Contents 1 1.1 1.2 1.3 1.4 Product profile ....................................................... 1 General description .............................................. 1 Features and benefits ...........................................1 Applications .......................................................... 1 Quick reference data ............................................ 1 2 Pinning information ............................................... 2 3 Ordering information ............................................. 2 4 Marking ................................................................... 2 5 Limiting values .......................................................2 6 Thermal characteristics .........................................4 7 Characteristics ....................................................... 5 8 Package outline ..................................................... 9 9 9.1 9.2 9.3 9.4 Legal information .................................................10 Data sheet status ............................................... 10 Definitions ...........................................................10 Disclaimers .........................................................10 Trademarks ........................................................ 11 © NXP B.V. 2012. All rights reserved For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 6 July 2012 BUK7610-100B Product data sheet All information provided in this document is subject to legal disclaimers. 6 July 2012 © NXP B.V. 2012. All rights reserved 12 / 12