OSRAM PrevaLED® COIN 50 AC Technical Information Product features Integrated driver, heat sink and lens optics Fits in most existing MR-16 traditional luminaires Narrow beam angles, 24o , 40o & 60o (for 800lm) LED replacement for MR-16 Flexibility through 2 lumen packages and 2 CCTs IP44 & Phase Cut dimmable (refer to dimmer list) Benefits Easy & fast design-in for luminaire manufacturers Turn-key solution for projects Applications For Spot & Track-light in: Chain stores, Retail shops Shopping malls Exhibition halls Museums Technical Operating Data Input Voltage [Vac] Product PL-COIN50 AC-700-830-24-230V-G1 PL-COIN50 AC-700-830-40-230V-G1 PL-COIN50 AC-700-840-24-230V-G1 PL-COIN50 AC-700-840-40-230V-G1 PL-COIN50 AC-800-830-24-230V-G1 PL-COIN50 AC-800-830-40-230V-G1 PL-COIN50 AC-800-830-60-230V-G1 PL-COIN50 AC-800-840-24-230V-G1 PL-COIN50 AC-800-840-40-230V-G1 PL-COIN50 AC-800-840-60-230V-G1 NominalP Beam Color Nominal Typ. CRI Efficacy ower [W] Angle [°] Temp. [K] Flux [lm] [Ra] [lm/W] 220-240V 220-240V 220-240V 220-240V 220-240V 220-240V 220-240V 220-240V 220-240V 220-240V 8.2 8.2 8.2 8.2 9.2 9.2 9.2 9.2 9.2 9.2 24 40 24 40 24 40 60 24 40 60 3000 3000 4000 4000 3000 3000 3000 4000 4000 4000 650 650 720 720 800 800 800 830 830 830 83 83 83 83 83 83 83 83 83 83 79.3 79.3 87.8 87.8 86.9 86.9 86.9 90.2 90.2 90.2 All Data are related to the entire module (Testing at steady status. Ta=25oC ± 5oC. Testing current tolerance: ±5%) Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data Technical Features Module ready to use with two cables Color tolerance: <MacAdam 4 SDCM Cable length 500 mm, cable Ø 2.15 mm Max. tc temperature of 90oC (see IEC/PAS 62717) Color Rendering index CRI (Ra) typ. 83 L70B50 >= 35,000 hours at tp=73oC Light engine efficacy up to 90 lm/W including driver PrevaLED® COIN 50 AC Page 1 OSRAM Minimum and Maximum Ratings Product Operating Temperature At tc-Point [C°]* Storage Input AC Max Power Temperature voltage [W] range [C°]* PL-COIN50 AC-700-830-24-230V-G1 -20 … 90 -40 … 80 198 - 264 8.7 PL-COIN50 AC-700-830-40-230V-G1 -20 … 90 -40 … 80 198 - 264 8.7 PL-COIN50 AC-700-840-24-230V-G1 -20 … 90 -40 … 80 198 - 264 8.7 PL-COIN50 AC-700-840-40-230V-G1 -20 … 90 -40 … 80 198 - 264 8.7 PL-COIN50 AC-800-830-24-230V-G1 -20 … 90 -40 … 80 198 - 264 9.9 PL-COIN50 AC-800-830-40-230V-G1 -20 … 90 -40 … 80 198 - 264 9.9 PL-COIN50 AC-800-830-60-230V-G1 -20 … 90 -40 … 80 198 - 264 9.9 PL-COIN50 AC-800-840-24-230V-G1 -20 … 90 -40 … 80 198 - 264 9.9 PL-COIN50 AC-800-840-40-230V-G1 -20 … 90 -40 … 80 198 - 264 9.9 PL-COIN50 AC-800-840-60-230V-G1 -20 … 90 -40 … 80 198 - 264 9.9 *) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED Module. Exceeding maximum ratings for operating current will cause hazardous overload and will likely destroy the LED Module. The temperature of the LED module must be measured at the tc-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. For exact location of the tc-point see drawing below. Dimensions & Mechanical data Dimension (mm) Ø50 x 75 (H) Mounting MR16 similar Optics PC lens Weight 185 grams ±20g PrevaLED® COIN 50 AC Page 2 OSRAM Standard Compliance Safety EN 62031 EMC EN 55015, EN 61547 Eye Security EN 62471 Ingress Production Dry Location, IP 44 Environment RoHS Electrical Operating Conditions 40000 35000 110% Lifetime (hours) Flux normalized at Tp=73℃ 115% 105% 100% 95% 25 35 45 55 65 75 45 55 PL-CN50AC-G1 650-8XX XX 230V PL-CN50AC-G1 800-8XX XX 230V 120% Flux normalized at "input voltage=230VAC" 35 Tc (℃) PL-CN50AC-G1 800-8XX XX 230V 110% 100% 90% 80% 230 250 270 Input voltage (VAC) PrevaLED® COIN 50 AC 20000 25 PL-CN50AC-G1 650-8XX XX 230V 210 25000 15000 85 Tc (℃) 190 30000 Page 3 65 75 85 OSRAM Safety Information The LED module itself and all its components must not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board. To avoid mechanical damage to the connecting cables, the module should be attached securely to the intended substrate. Heavy vibration should be avoided. Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Pay attention to standard ESD precautions when installing the module. Damage by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements. If the IP rating of the fixture should be higher than IP20, the design of the housing should be according to the IP standards in the application. Pay attention not to exceed the maximum operation temperature at tc point when the modules are used in enclosed environment. Recommended operation condition for IP44 PrevaLED® COIN 50 AC Page 4 OSRAM Ordering Guide Product Name Product Code Product Number (EAN-010) Product Number (EAN-040) Piece Per Box PrevaLED COIN 50 AC PL-CN50AC-G1 800-830 24 230V 4052899276604 4052899276611 12 PrevaLED COIN 50 AC PL-CN50AC-G1 800-840 24 230V 4052899276628 4052899276635 12 PrevaLED COIN 50 AC PL-CN50AC-G1 800-830 40 230V 4052899276642 4052899276659 12 PrevaLED COIN 50 AC PL-CN50AC-G1 800-840 40 230V 4052899276666 4052899276673 12 PrevaLED COIN 50 AC PL-CN50AC-G1 800-830 60 230V 4052899276680 4052899276697 12 PrevaLED COIN 50 AC PL-CN50AC-G1 800-840 60 230V 4052899276703 4052899276710 12 PrevaLED COIN 50 AC PL-CN50AC-G1 650-830 24 230V 4052899276727 4052899276734 12 PrevaLED COIN 50 AC PL-CN50AC-G1 650-840 24 230V 4052899276741 4052899276758 12 PrevaLED COIN 50 AC PL-CN50AC-G1 650-830 40 230V 4052899276765 4052899276772 12 PrevaLED COIN 50 AC PL-CN50AC-G1 650-840 40 230V 4052899276789 4052899276796 12 Sales and Technical Support OSRAM Asia Pacific Management Company Shenzhen Branch BU Light Engines & Control Sales and technical support is given by the local OSRAM subsidiaries. Complete subsidiaries listing is available at OSRAM homepage. 4-5/F Hantang Building, OCT (Overseas Chinese Town) Nanshan District, Shenzhen 518053, P.R. China www.osram.com PrevaLED® COIN 50 AC Page 5