SKKD 212/18 Absolute Maximum Ratings Symbol Conditions Values Unit A Recitifier Diode Tc = 85 °C 213 Tc = 100 °C 165 A Tj = 25 °C 6600 A Tj = 135 °C 5500 A Tj = 25 °C 217800 A²s Tj = 135 °C 151250 A²s VRSM 1900 V VRRM 1800 V -40 ... 135 °C -40 ... 125 °C 1 min 3000 V 1s 3600 V IFAV IFSM i2t SEMIPACK® 2 Rectifier Diode Modules sin. 180° 10 ms 10 ms Tj Module Tstg SKKD 212/18 Visol Features Characteristics • Heat transfer through aluminium oxide ceramic isolated metal baseplate • Hard soldered joints for high reliability • UL recognized, file no. E63532 Symbol Typical Applications* • Non-controllable rectifiers for AC/AC converters • Line rectifiers for transistorized AC motor controllers • Field supply for DC motors a.c.; 50 Hz; r.m.s. Conditions min. typ. max. Unit Diode VF Tj = 25 °C, IF = 500 A 1.40 V V(TO) Tj = 135 °C 0.75 V rT Tj = 135 °C 1.05 m IRD Tj = 135 °C, VRD = VRRM Rth(j-c) Rth(j-c) cont. sin. 180° 9 mA per chip 0.18 K/W per module 0.09 K/W per chip 0.18 K/W per module 0.09 K/W Module Rth(c-s) chip 0.1 K/W module 0.05 K/W Ms to heatsink M5 4.25 5.75 Nm Mt to terminals M6 4.25 5.75 Nm 5 * 9,81 m/s² a w 165 g SKKD © by SEMIKRON Rev. 5 – 03.09.2013 1 SKKD 212/18 Fig. 11L: Power dissipation per diode vs. forward current Fig. 11R: Power dissipation per diode vs. ambient temperature Fig. 12L: Power dissipation of two modules vs. direct current Fig. 12R: Power dissipation of two modules vs. case temperature Fig. 13L: Power dissipation of three modules vs. direct current Fig. 13R: Power dissipation of three modules vs. case temperature 2 Rev. 5 – 03.09.2013 © by SEMIKRON SKKD 212/18 Fig. 14: Transient thermal impedance vs. time Fig. 15: Forward characteristics Fig. 16: Surge overload current vs. time © by SEMIKRON Rev. 5 – 03.09.2013 3 SKKD 212/18 SKKD SEMIPACK 2 This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. 4 Rev. 5 – 03.09.2013 © by SEMIKRON