VJ....W1BC Ultra Small Series 0201 www.vishay.com Vishay Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES • High capacitance in unit size • High precision dimensional tolerances • Suitably used in high-accuracy automatic mounting machine • Dry sheet manufacturing technology • Base Metal Electrode system (BME) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Miniature microwave module • Portable equipment - mobile phone, PDA ELECTRICAL SPECIFICATIONS Size 0201 Dielectric C0G (NP0) X7R X5R 0.5 pF to 120 pF 100 pF to 10 nF 100 pF to 2.2 μF Cap. 5 pF: B (± 0.1 pF), C (± 0.25 pF) 5 pF < Cap. < 10 pF: C (± 0.25 pF), D (± 0.5 pF) Cap. 10 pF: F (± 1 %), G (2 %), J (5 %), K (± 10 %) J (± 5 %) K (± 10 %) M (± 20 %) J (± 5 %) K (± 10 %) M (± 20 %) 16 V, 25 V, 50 V 10 V, 16 V, 25 V, 50 V 6.3 V, 10 V, 16 V, 25 V, 50 V Capacitance Capacitance Tolerance (2)(3) Rated Voltage (VDC) tan /Q (1) Cap. < 30 pF, Q 400 + 20 C Cap. 30 pF, Q 1000 See Table 1 10 G 10 G or R x C 500 F, whichever is less Insulation Resistance at UR Operating Temperature -55 °C to +125 °C Capacitance Change -55 °C to +85 °C ± 30 ppm Termination ± 15 % Ni/Sn lead (Pb)-free termination Notes (1) Measured at 30 % to 70 % relative humidity NP0: apply 1.0 VRMS ± 0.2 VRMS, 1.0 MHz ± 10 % at the condition of 25 °C ambient temperature X7R, X5R: apply 1.0 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 % (0201 / 6.3 V, cap. 224: 0.5 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 %) at the condition of 25 °C ambient temperature (2) Preconditioning for X7R / X5R MLCC: perform a heat treatment at 150 °C ± 10 °C for 1 h, then leave in ambient condition for 24 h ± 2 h before measurement (3) Tolerances restriction see “Selection Chart” Table 1 X7R / X5R: RATED VOLTAGE D.F. EXCEPTION OF D.F. 50 V 3% - - 25 V 3.5 % 5% 0201 0.01 μF 16 V 3.5 % 5% 0201 0.01 μF 10 V 5% 6.3 V 10 % Revision: 13-May-16 10 % 0201 0.1 μF 10 % 0201 0.012 μF 15 % 0201 0.1 μF 15 % 0201 0.1 μF Document Number: 28538 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Ultra Small Series 0201 www.vishay.com Vishay QUICK REFERENCE DATA DIELECTRIC CASE CAPACITANCE MAXIMUM VOLTAGE (V) MINIMUM MAXIMUM C0G (NP0) 0201 50 0.5 pF 120 pF X5R 0201 50 100 pF 2.2 μF X7R 0201 50 100 pF 10 nF Note • Detail ratings see “Selection Chart” table ORDERING INFORMATION VJ0201 A 100 J SIZE CODE DIELECTRIC CAPACITANCE 0201 A = C0G (NP0) G = X5R Y = X7R Two significant digits followed by the number of zeros. R is in place of decimal point: 0R5 = 0.5 pF 1R0 = 1.0 pF 100 = 10 pF TOLERANCE (1) B = ± 0.10 pF C = ± 0.25 pF D = ± 0.5 pF F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % X X C W1BC TERMINATION RATED VOLTAGE PACKAGING PROCESS CODE FOR BASIC COMMODITY X = Ni barrier 100 % matte tin Y = 6.3 V Q = 10 V J = 16 V X = 25 V A = 50 V C = 7" reel / paper tape Note (1) Detail tolerance see under “Electrical Specifications” table DIMENSIONS in inches (millimeters) W T MB MB L SIZE CODE (1) 0201 (0603) L W T MAX. 0.024 ± 0.0012 (0.60 ±0.03) 0.012 ± 0.0012 (0.30 ±0.03) 0.013 (0.33) 0.024 ± 0.002 (0.60 ±0.05) (2) 0.024 ± 0.0035 (3) (0.60 ±0.09) 0.024 ± 0.002 (0.60 ±0.05) (2) 0.024 ± 0.0035 (3) (0.60 ±0.09) (2) 0.014 (0.35) 0.0153 (3) (0.39) MB 0.006 ± 0.002 (0.15 ± 0.05) 0.006 + 0.004 / - 0.002 (3) (0.15 + 0.1 / - 0.05) Notes (1) Reflow soldering only (2) For capacitance values 0.68 μF (3) For capacitance values 1 μF Revision: 13-May-16 Document Number: 28538 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Ultra Small Series 0201 www.vishay.com Vishay SELECTION CHART DIELECTRIC STYLE SIZE CODE VOLTAGE VDC VOLTAGE CODE CAP. CODE CAP. 0R5 0.5 pF 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1000 pF 152 1500 pF 222 2200 pF 332 3300 pF 472 4700 pF 682 6800 pF 103 0.010 μF 153 0.015 μF 223 0.022 μF 333 0.033 μF 473 0.047 μF 683 0.068 μF 104 0.10 μF 224 0.22 μF 474 0.47 μF 105 1.0 μF 225 2.2 μF C0G (NP0) 16 V J 25 V X 50 V A L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L 6.3 V Y 10 V Q L L L L L L L L L L L L L (3) L L (3) L (1) L L (3) X5R VJ0201 0201 16 V 25 V J X 50 V A L L L L L L L L L L L L L L L L L L L (3) L (3) X7R 10 V Q L L L L L L L 16 V J 25 V X 50 V A L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L (2) L (1) Notes • Letters indicate product thickness, see “Packaging quantities” (1) Only in 20 % (code “M”) tolerance (2) Only in 10 % (code “K”) tolerance (3) Not in 5 % (code “J”) tolerance Revision: 13-May-16 Document Number: 28538 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Ultra Small Series 0201 www.vishay.com Vishay PACKAGING QUANTITIES PAPER TAPE SIZE CODE (inch / mm) THICKNESS (mm) 7" REEL (C) 13" REEL (P) 0201 (0603) 0.39 15K - PAPER TAPE SPECIFICATIONS DIMENSIONS OF PAPER TAPE in millimeters PRODUCT SIZE CODE SYMBOL P0 0201 P2 D0 E F W B0 A0 P1 REEL SPECIFICATION A0 0.38 ± 0.05 B0 0.68 ± 0.05 W 8.00 ± 0.10 E 1.75 ± 0.05 F 3.50 ± 0.05 D0 1.55 ± 0.05 P0 4.00 ± 0.10 P1 2.00 ± 0.05 P2 2.00 ± 0.05 REEL DIMENSIONS AND TAPE WIDTH in millimeters D C A SYMBOL Ø 180 mm; 7" Ø 330 mm; 13" A 13.0 ± 0.5 13.0 ± 0.5 B 9.0 ± 1.0 9.0 ± 1.0 C 178.0 ± 1.0 330.0 ± 1.0 D 60.0 ± 1.0 100.0 ± 1.0 B Revision: 13-May-16 Document Number: 28538 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Ultra Small Series 0201 www.vishay.com Vishay CONSTRUCTION NO. NAME C0G (NP0), X5R, X7R 1 Ceramic material BaTiO3 based 2 Inner electrode Ni 3 4 Termination 5 Inner layer Cu Middle layer Ni Outer layer Sn (matt) 3 4 5 1 2 STORAGE AND HANDLING CONDITIONS (1) To store products at 5 °C to 40 °C ambient temperature and 20 % to 70 % relative humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. Do not store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which easily be resulted in poor soldering. b. To store products on the shelf and avoid exposure to moisture. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 13-May-16 Document Number: 28538 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000