Data Sheet

PEMD10; PUMD10
NPN/PNP resistor-equipped transistors;
R1 = 2.2 k, R2 = 47 k
Rev. 6 — 4 January 2012
Product data sheet
1. Product profile
1.1 General description
NPN/PNP Resistor-Equipped Transistors (RET) in Surface-Mounted Device (SMD) plastic
packages.
Table 1.
Product overview
Type number
Package
NXP
PEMD10
SOT666
PUMD10
SOT363
JEITA
PNP/PNP
complement
NPN/NPN
complement
Package
configuration
-
PEMB10
PEMH10
ultra small and flat lead
SC-88
PUMB10
PUMH10
very small
1.2 Features and benefits
 100 mA output current capability
 Built-in bias resistors
 Simplifies circuit design
 Reduces component count
 Reduces pick and place costs
 AEC-Q101 qualified
1.3 Applications
 Low current peripheral driver
 Control of IC inputs
 Replaces general-purpose transistors in digital applications
1.4 Quick reference data
Table 2.
Symbol
Quick reference data
Parameter
Conditions
Min
Typ
Max
Unit
-
-
50
V
Per transistor; for the PNP transistor (TR2) with negative polarity
VCEO
collector-emitter voltage
open base
IO
output current
-
-
100
mA
R1
bias resistor 1 (input)
1.54
2.20
2.86
k
R2/R1
bias resistor ratio
17
21
26
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
2. Pinning information
Table 3.
Pinning
Pin
Description
Simplified outline
1
GND (emitter) TR1
2
input (base) TR1
3
output (collector) TR2
4
GND (emitter) TR2
5
input (base) TR2
6
output (collector) TR1
6
5
4
Graphic symbol
6
5
R1
4
R2
TR2
1
2
3
TR1
R2
001aab555
1
R1
2
3
006aaa143
3. Ordering information
Table 4.
Ordering information
Type number
Package
Name
Description
Version
PEMD10
-
plastic surface-mounted package; 6 leads
SOT666
PUMD10
SC-88
plastic surface-mounted package; 6 leads
SOT363
4. Marking
Table 5.
Type number
Marking code[1]
PEMD10
D1
PUMD10
D*0
[1]
PEMD10_PUMD10
Product data sheet
Marking codes
* = placeholder for manufacturing site code.
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
2 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
5. Limiting values
Table 6.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
Per transistor; for the PNP transistor (TR2) with negative polarity
VCBO
collector-base voltage
open emitter
-
50
V
VCEO
collector-emitter voltage
open base
-
50
V
VEBO
emitter-base voltage
open collector
-
5
V
VI
input voltage TR1
positive
-
+12
V
negative
-
5
V
positive
-
+5
V
input voltage TR2
negative
-
12
V
IO
output current
-
100
mA
ICM
peak collector current
-
100
mA
total power dissipation
Ptot
Tamb  25 C
[1]
[2]
PEMD10 (SOT666)
PUMD10 (SOT363)
-
200
mW
-
200
mW
Per device
total power dissipation
Ptot
Tamb  25 C
PEMD10 (SOT666)
PUMD10 (SOT363)
PEMD10_PUMD10
Product data sheet
[1]
[2]
-
300
mW
-
300
mW
Tj
junction temperature
-
150
C
Tamb
ambient temperature
65
+150
C
Tstg
storage temperature
65
+150
C
[1]
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2]
Reflow soldering is the only recommended soldering method.
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
3 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
006aac749
400
Ptot
(mW)
300
200
100
0
-75
-25
25
75
125
175
Tamb (°C)
SOT363 and SOT666; FR4 PCB, standard footprint
Fig 1.
Per device: Power derating curve
6. Thermal characteristics
Table 7.
Thermal characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
-
-
625
K/W
-
-
625
K/W
-
-
417
K/W
-
-
417
K/W
Per transistor
Rth(j-a)
thermal resistance from
junction to ambient
in free air
[1]
[2]
PEMD10 (SOT666)
PUMD10 (SOT363)
Per device
Rth(j-a)
thermal resistance from
junction to ambient
in free air
PEMD10 (SOT666)
PUMD10 (SOT363)
PEMD10_PUMD10
Product data sheet
[1]
[2]
[1]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2]
Reflow soldering is the only recommended soldering method.
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
4 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
006aac751
103
duty cycle = 1
Zth(j-a)
(K/W)
0.75
0.5
0.33
0.2
102
0.1
0.05
0.02
10
0.01
0
1
10-5
10-4
10-3
10-2
10-1
1
10
102
103
tp (s)
FR4 PCB, standard footprint
Fig 2.
Transient thermal impedance from junction to ambient as a function of pulse duration for
PEMD10 (SOT666); typical values
006aac750
103
duty cycle = 1
Zth(j-a)
(K/W)
0.75
0.5
0.33
0.2
102
0.1
0.05
0.02
10
0.01
0
1
10-5
10-4
10-3
10-2
10-1
1
10
102
103
tp (s)
FR4 PCB, standard footprint
Fig 3.
Transient thermal impedance from junction to ambient as a function of pulse duration for
PUMD10 (SOT363); typical values
PEMD10_PUMD10
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
5 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
7. Characteristics
Table 8.
Characteristics
Tamb = 25 C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Per transistor; for the PNP transistor (TR2) with negative polarity
ICBO
collector-base
cut-off current
VCB = 50 V; IE = 0 A
-
-
100
nA
ICEO
collector-emitter
cut-off current
VCE = 30 V; IB = 0 A
-
-
100
nA
VCE = 30 V; IB = 0 A;
Tj = 150 C
-
-
5
A
IEBO
emitter-base
cut-off current
VEB = 5 V; IC = 0 A
-
-
180
A
hFE
DC current gain
VCE = 5 V; IC = 10 mA
100
-
-
VCEsat
collector-emitter
saturation voltage
IC = 5 mA; IB = 0.25 mA
-
-
100
mV
VI(off)
off-state input
voltage
VCE = 5 V; IC = 100 A
-
0.6
0.5
V
VI(on)
on-state input
voltage
VCE = 0.3 V; IC = 5 mA
1.1
0.75
-
V
R1
bias resistor 1 (input)
1.54
2.20
2.86
k
R2/R1
bias resistor ratio
17
21
26
Cc
collector capacitance VCB = 10 V; IE = ie = 0 A;
f = 1 MHz
-
-
2.5
pF
-
-
3
pF
TR1 (NPN)
-
230
-
MHz
TR2 (PNP)
-
180
-
MHz
TR1 (NPN)
TR2 (PNP)
fT
[1]
PEMD10_PUMD10
Product data sheet
transition frequency
VCB = 5 V; IC = 10 mA;
f = 100 MHz
[1]
Characteristics of built-in transistor.
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
6 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
006aac805
103
hFE
006aac810
1
(1)
(2)
VCEsat
(V)
(3)
102
10-1
(1)
(2)
10
(3)
1
10-1
1
102
10
10-2
10-1
1
IC (mA)
VCE = 5 V
IC/IB = 20
(1) Tamb = 100 C
(1) Tamb = 100 C
(2) Tamb = 25 C
(2) Tamb = 25 C
(3) Tamb = 40 C
(3) Tamb = 40 C
Fig 4.
TR1 (NPN): DC current gain as a function of
collector current; typical values
Fig 5.
006aac811
10
102
10
IC (mA)
TR1 (NPN): Collector-emitter saturation
voltage as a function of collector current;
typical values
006aac812
1
(1)
(2)
VI(on)
(V)
VI(off)
(V)
(3)
(1)
1
(2)
(3)
10-1
10-1
1
102
10
10-1
10-1
IC (mA)
VCE = 0.3 V
VCE = 5 V
(1) Tamb = 40 C
(2) Tamb = 25 C
(2) Tamb = 25 C
(3) Tamb = 100 C
(3) Tamb = 100 C
TR1 (NPN): On-state input voltage as a
function of collector current; typical values
PEMD10_PUMD10
Product data sheet
10
IC (mA)
(1) Tamb = 40 C
Fig 6.
1
Fig 7.
TR1 (NPN): Off-state input voltage as a
function of collector current; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
7 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
006aac813
3
Cc
(pF)
006aac757
103
fT
(MHz)
2
102
1
10
10-1
0
0
10
20
30
40
50
VCB (V)
102
10
IC (mA)
f = 1 MHz; Tamb = 25 C
Fig 8.
1
VCE = 5 V; Tamb = 25 C
TR1 (NPN): Collector capacitance as a function
of collector-base voltage; typical values
006aac814
103
Fig 9.
TR1 (NPN): Transition frequency as a function
of collector current; typical values of built-in
transistor
006aac815
-1
(1)
hFE
(2)
VCEsat
(V)
(3)
102
-10-1
(1)
10
(2)
(3)
1
-10-1
-1
-102
-10
-10-2
-10-1
IC (mA)
VCE = 5 V
IC/IB = 20
(1) Tamb = 100 C
(2) Tamb = 25 C
(2) Tamb = 25 C
(3) Tamb = 40 C
(3) Tamb = 40 C
Fig 10. TR2 (PNP): DC current gain as a function of
collector current; typical values
Product data sheet
-102
-10
IC (mA)
(1) Tamb = 100 C
PEMD10_PUMD10
-1
Fig 11. TR2 (PNP): Collector-emitter saturation
voltage as a function of collector current;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
8 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
006aac816
-10
006aac817
-1
(1)
(2)
VI(on)
(V)
VI(off)
(V)
(3)
(1)
-1
(2)
(3)
-10-1
-10-1
-1
-102
-10
-10-1
-10-1
-1
IC (mA)
-10
IC (mA)
VCE = 0.3 V
VCE = 5 V
(1) Tamb = 40 C
(1) Tamb = 40 C
(2) Tamb = 25 C
(2) Tamb = 25 C
(3) Tamb = 100 C
(3) Tamb = 100 C
Fig 12. TR2 (PNP): On-state input voltage as a
function of collector current; typical values
006aac818
9
Cc
(pF)
Fig 13. TR2 (PNP): Off-state input voltage as a
function of collector current; typical values
006aac763
103
fT
(MHz)
6
102
3
0
0
-10
-20
-30
-40
-50
VCB (V)
f = 1 MHz; Tamb = 25 C
Product data sheet
-1
-102
-10
IC (mA)
VCE = 5 V; Tamb = 25 C
Fig 14. TR2 (PNP): Collector capacitance as a function
of collector-base voltage; typical values
PEMD10_PUMD10
10
-10-1
Fig 15. TR2 (PNP): Transition frequency as a function
of collector current; typical values of built-in
transistor
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
9 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
9. Package outline
1.7
1.5
0.6
0.5
6
5
4
0.3
0.1
1.7
1.5
1.3
1.1
pin 1 index
1
2
3
0.18
0.08
0.27
0.17
0.5
1
Dimensions in mm
04-11-08
Fig 16. Package outline PEMD10 (SOT666)
2.2
1.8
6
2.2 1.35
2.0 1.15
1.1
0.8
5
4
2
3
0.45
0.15
pin 1
index
1
0.3
0.2
0.65
0.25
0.10
1.3
Dimensions in mm
06-03-16
Fig 17. Package outline PUMD10 (SOT363/SC-88)
PEMD10_PUMD10
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
10 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
10. Packing information
Table 9.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number Package Description
PEMD10
SOT666
PUMD10
[1]
SOT363
Packing quantity
3000 4000
8000 10000
2 mm pitch, 8 mm tape and reel
-
-
-315
-
4 mm pitch, 8 mm tape and reel
-
-115
-
-
4 mm pitch, 8 mm tape and reel; T1
[2]
-115
-
-
-135
4 mm pitch, 8 mm tape and reel; T2
[3]
-125
-
-
-165
For further information and the availability of packing methods, see Section 14.
[2]
T1: normal taping
[3]
T2: reverse taping
11. Soldering
2.75
2.45
2.1
1.6
solder lands
0.4
(6×) 0.25
(2×)
0.538
2
1.7 1.075
0.3
(2×)
0.55
(2×)
placement area
solder paste
occupied area
0.325 0.375
(4×) (4×)
Dimensions in mm
1.7
0.45
(4×)
0.6
(2×)
0.5
(4×)
0.65
(2×)
sot666_fr
Reflow soldering is the only recommended soldering method.
Fig 18. Reflow soldering footprint PEMD10 (SOT666)
PEMD10_PUMD10
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
11 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
2.65
solder lands
2.35 1.5
0.4 (2×)
0.6 0.5
(4×) (4×)
solder resist
solder paste
0.5
(4×)
0.6
(2×)
occupied area
0.6
(4×)
Dimensions in mm
1.8
sot363_fr
Fig 19. Reflow soldering footprint PUMD10 (SOT363/SC-88)
1.5
solder lands
0.3 2.5
4.5
solder resist
occupied area
1.5
Dimensions in mm
1.3
1.3
preferred transport
direction during soldering
2.45
5.3
sot363_fw
Fig 20. Wave soldering footprint PUMD10 (SOT363/SC-88)
PEMD10_PUMD10
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
12 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
12. Revision history
Table 10.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
PEMD10_PUMD10 v.6
20120104
Product data sheet
-
PEMD10_PUMD10 v.5
Modifications:
•
The format of this document has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
•
•
•
•
•
•
•
•
•
•
•
Legal texts have been adapted to the new company name where appropriate.
Section 1 “Product profile”: updated
Section 4 “Marking”: updated
Table 6 “Limiting values”: Ptot updated according to the latest measurements
Table 7 “Thermal characteristics”: updated according to the latest measurements
Table 8 “Characteristics”: ICEO updated according to the latest measurements, fT added
Figure 1 to 3, 8, 9, 14 and 15: added
Figure 4 to 7 and Figure 10 to 13: updated
Section 8 “Test information”: added
Section 11 “Soldering”: added
Section 13 “Legal information”: updated
PEMD10_PUMD10 v.5
20040415
Product data sheet
-
PEMD10_PUMD10 v.4
PEMD10_PUMD10 v.4
20031104
Product specification
-
PEMD10 v.2
PUMD10 v.3
PEMD10_PUMD10
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
13 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
PEMD10_PUMD10
Product data sheet
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
14 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
PEMD10_PUMD10
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 4 January 2012
© NXP B.V. 2012. All rights reserved.
15 of 16
PEMD10; PUMD10
NXP Semiconductors
NPN/PNP resistor-equipped transistors; R1 = 2.2 k, R2 = 47 k
15. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
8.1
9
10
11
12
13
13.1
13.2
13.3
13.4
14
15
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test information . . . . . . . . . . . . . . . . . . . . . . . . 10
Quality information . . . . . . . . . . . . . . . . . . . . . 10
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Packing information . . . . . . . . . . . . . . . . . . . . 11
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 13
Legal information. . . . . . . . . . . . . . . . . . . . . . . 14
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 14
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Contact information. . . . . . . . . . . . . . . . . . . . . 15
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2012.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 4 January 2012
Document identifier: PEMD10_PUMD10