Datasheet

AON6758
30V N-Channel AlphaMOS
General Description
Product Summary
• Latest Trench Power AlphaMOS (αMOS LV) technology
• Integrated Schottky Diode (SRFET)
• Very Low RDS(on) at 4.5VGS
• Low Gate Charge
• High Current Capability
• RoHS and Halogen-Free Compliant
Application
VDS
ID (at VGS=10V)
30V
32A
RDS(ON) (at VGS=10V)
< 3.6mΩ
RDS(ON) (at VGS = 4.5V)
< 5mΩ
100% UIS Tested
100% Rg Tested
• DC/DC Converters in Computing, Servers, and POL
• Isolated DC/DC Converters in Telecom and Industrial
DFN5X6
D
Top View
Top View
Bottom View
1
8
2
7
3
6
4
5
SRFETTM
Soft Recovery MOSFET:
Integrated Schottky Diode
G
PIN1
S
Absolute Maximum Ratings TA=25°C unless otherwise noted
Parameter
Symbol
Drain-Source Voltage
VDS
Gate-Source Voltage
VGS
TC=25°C
Continuous Drain
Current G
Pulsed Drain Current C
Avalanche Current
C
V
A
128
27
IDSM
TA=70°C
±20
25
IDM
TA=25°C
Continuous Drain
Current
Units
V
32
ID
TC=100°C
Maximum
30
A
21
IAS
50
A
Avalanche energy L=0.05mH C
EAS
63
mJ
VDS Spike
VSPIKE
36
V
100ns
TC=25°C
Power Dissipation B
TC=100°C
Power Dissipation A
TA=70°C
PD
TA=25°C
Rev 1: April 2012
4.1
Steady-State
Steady-State
RθJA
RθJC
W
2.6
TJ, TSTG
Symbol
t ≤ 10s
W
16
PDSM
Junction and Storage Temperature Range
Thermal Characteristics
Parameter
Maximum Junction-to-Ambient A
Maximum Junction-to-Ambient A D
Maximum Junction-to-Case
41
-55 to 150
Typ
24
53
2.6
www.aosmd.com
°C
Max
30
64
3
Units
°C/W
°C/W
°C/W
Page 1 of 6
AON6758
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol
Parameter
STATIC PARAMETERS
BVDSS
Drain-Source Breakdown Voltage
IDSS
Zero Gate Voltage Drain Current
Conditions
Min
ID=10mA, VGS=0V
Gate-Body leakage current
VDS=0V, VGS= ±20V
Gate Threshold Voltage
VDS=VGS, ID=250µA
RDS(ON)
Static Drain-Source On-Resistance
100
1.4
VGS=10V, ID=20A
TJ=125°C
VGS=4.5V, ID=20A
gFS
Forward Transconductance
VDS=5V, ID=20A
VSD
Diode Forward Voltage
IS=1A,VGS=0V
IS
Maximum Body-Diode Continuous CurrentG
Output Capacitance
Crss
Reverse Transfer Capacitance
Rg
Gate resistance
VGS=0V, VDS=0V, f=1MHz
Qg(4.5V) Total Gate Charge
Qgs
Gate Source Charge
VGS=10V, VDS=15V, ID=20A
0.7
mA
100
nA
2.4
V
3
3.6
3.9
4.7
3.9
5
mΩ
mΩ
85
VGS=0V, VDS=15V, f=1MHz
SWITCHING PARAMETERS
Qg(10V) Total Gate Charge
1.8
0.48
DYNAMIC PARAMETERS
Ciss
Input Capacitance
Units
V
0.5
TJ=125°C
IGSS
Max
30
VDS=30V, VGS=0V
VGS(th)
Coss
Typ
S
0.6
V
32
A
1975
pF
913
pF
92
pF
1.5
2.3
Ω
29.0
40
nC
13.6
19
nC
5.8
nC
Qgd
Gate Drain Charge
5.3
nC
tD(on)
Turn-On DelayTime
7.9
ns
tr
Turn-On Rise Time
tD(off)
Turn-Off DelayTime
tf
Turn-Off Fall Time
trr
Body Diode Reverse Recovery Time
Qrr
Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/µs
VGS=10V, VDS=15V, RL=0.75Ω,
RGEN=3Ω
IF=20A, dI/dt=500A/µs
4.0
ns
27.3
ns
6.5
ns
19
ns
nC
36.7
A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The
Power dissipation PDSM is based on R θJA and the maximum allowed junction temperature of 150°C. The value in any given application depends
on the user's specific board design.
B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper
dissipation limit for cases where additional heatsinking is used.
C. Single pulse width limited by junction temperature TJ(MAX)=150°C.
D. The RθJA is the sum of the thermal impedance from junction to case RθJC and case to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming
a maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
G. The maximum current rating is package limited.
H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25°C.
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev 1: April 2012
www.aosmd.com
Page 2 of 6
AON6758
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
80
80
4V
VDS=5V
4.5V
60
3.5V
60
ID(A)
ID (A)
10V
40
40
VGS=3V
125°C
20
20
25°C
0
0
0
1
2
3
4
0
5
8
2
3
4
5
6
Normalized On-Resistance
1.6
6
RDS(ON) (mΩ
Ω)
1
VGS(Volts)
Figure 2: Transfer Characteristics (Note E)
VDS (Volts)
Fig 1: On-Region Characteristics (Note E)
VGS=4.5V
4
VGS=10V
2
VGS=10V
ID=20A
1.4
1.2
1
VGS=4.5V
ID=20A
0.8
0
0
5
0
10
15
20
25
30
ID (A)
Figure 3: On-Resistance vs. Drain Current and Gate
Voltage (Note E)
25
50
75
100
125
150
175
Temperature (°C)
Figure 4: On-Resistance vs. Junction Temperature
(Note E)
8
1.0E+01
ID=20A
125°C
1.0E+00
1.0E-01
125°C
IS (A)
RDS(ON) (mΩ
Ω)
6
4
1.0E-02
25°C
1.0E-03
2
25°C
1.0E-04
1.0E-05
0
2
6
8
10
VGS (Volts)
Figure 5: On-Resistance vs. Gate-Source Voltage
(Note E)
Rev 1: April 2012
4
www.aosmd.com
0.0
0.2
0.4
0.6
0.8
1.0
VSD (Volts)
Figure 6: Body-Diode Characteristics (Note E)
Page 3 of 6
AON6758
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
10
3000
VDS=15V
ID=20A
2500
Capacitance (pF)
VGS (Volts)
8
6
4
2
1500
1000
Coss
500
0
Crss
0
0
5
10
15
20
25
Qg (nC)
Figure 7: Gate-Charge Characteristics
30
0
5
10
15
20
25
VDS (Volts)
Figure 8: Capacitance Characteristics
30
500
1000.0
RDS(ON)
100µs
10.0
1ms
DC
100ms
1.0
TJ(Max)=150°C
TC=25°C
0.1
400
10µs
Power (W)
10µs
100.0
ID (Amps)
Ciss
2000
TJ(Max)=150°C
TC=25°C
17
5
2
10
300
200
100
0.0
0
0.01
0.1
1
VDS (Volts)
10
100
0.0001
0.001
0.01
0.1
1
10
0
Pulse Width (s)
18
Figure 10: Single Pulse Power Rating Junction-to-Case
(Note F)
Figure 9: Maximum Forward Biased Safe
Operating Area (Note F)
Zθ JC Normalized Transient
Thermal Resistance
10
D=Ton/T
TJ,PK=TC+PDM.ZθJC.RθJC
1
In descending order
D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
40
RθJC=3°C/W
PD
0.1
Single Pulse
Ton
T
0.01
0.00001
0.0001
0.001
0.01
0.1
1
10
100
Pulse Width (s)
Figure 11: Normalized Maximum Transient Thermal Impedance (Note F)
Rev 1: April 2012
www.aosmd.com
Page 4 of 6
AON6758
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
40
40
Current rating ID(A)
Power Dissipation (W)
50
30
20
10
30
20
10
0
0
0
25
50
75
100
125
TCASE (°
°C)
Figure 12: Power De-rating (Note F)
150
0
25
50
75
100
125
TCASE (°
°C)
Figure 13: Current De-rating (Note F)
150
10000
TA=25°C
Power (W)
1000
100
10
1
0.00001
0.001
0.1
10
1000
Pulse Width (s)
Figure 14: Single Pulse Power Rating Junction-to-Ambient (Note H)
Zθ JA Normalized Transient
Thermal Resistance
10
D=Ton/T
TJ,PK=TA+PDM.ZθJA.RθJA
1
In descending order
D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
RθJA=64°C/W
0.1
PD
0.01
Single Pulse
Ton
T
0.001
0.0001
0.001
0.01
0.1
1
10
100
1000
Pulse Width (s)
Figure 15: Normalized Maximum Transient Thermal Impedance (Note H)
Rev 1: April 2012
www.aosmd.com
Page 5 of 6
AON6758
Gate Charge Test Circuit & Waveform
Vgs
Qg
10V
+
+ Vds
VDC
-
Qgs
Qgd
VDC
-
DUT
Vgs
Ig
Charge
Resistive Switching Test Circuit & Waveforms
RL
Vds
Vds
90%
+ Vdd
DUT
Vgs
VDC
-
Rg
10%
Vgs
Vgs
t d(on)
tr
t d(off)
t on
tf
toff
Unclamped Inductive Switching (UIS) Test Circuit & Waveforms
L
2
E AR = 1/2 LIAR
Vds
BVDSS
Vds
Id
+ Vdd
Vgs
Vgs
I AR
VDC
-
Rg
Id
DUT
Vgs
Vgs
Diode Recovery Test Circuit & Waveforms
Q rr = - Idt
Vds +
DUT
Vds Isd
Vgs
Ig
Rev 1: April 2012
Vgs
L
Isd
+ Vdd
t rr
dI/dt
I RM
Vdd
VDC
-
IF
Vds
www.aosmd.com
Page 6 of 6