Ordering number : ENA1753A SMA3107 MMIC Amplifier, 3V, 6mA, 0.1 to 2.8GHz, MCPH6 http://onsemi.com Features • • • • High Gain Wideband response Low current Port impedance : Gp=23.5dB typ. @1GHz : fu=2.8GHz : ICC=6mA typ. : input/output 50Ω Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Supply Voltage Conditions Ratings Unit VCC ICC 5 V 15 mA PD Topr 280 mW Operating Temperature --40 to +85 °C Storage Temperature Tstg --55 to +150 °C Circuit Current Allowable Power Dissipation Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7022A-018 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 6 5 0 to 0.02 1 2 Marking TL 3 0.65 LE LOT No. 0.3 0.85 0.25 Packing Type : TL 4 LOT No. 0.07 SMA3107-TL-E 0.15 2.1 1.6 0.25 2.0 1 2 3 1 : VCC 2 : GND 3 : OUT 4 : GND 5 : GND 6 : IN 6 5 4 MCPH6 Semiconductor Components Industries, LLC, 2013 August, 2013 D0512 TKIM TC-00002857/62310AM TKIM TC-00002385 No. A1753-1/7 SMA3107 Recommended Operating Condition at Ta=25°C Parameter Symbol Supply Voltage Ratings Conditions min VCC Topr Operating Ambient Temperature typ Unit max 2.7 3 3.3 V --40 +25 +85 °C Electrical Characteristics at Ta=25°C, VCC=3V, Zs=ZL=50Ω Parameter Symbol Circuit Current Ratings Conditions min ICC Power Gain Gp Isolation ISL Input Return Loss RLin Output Return Loss RLout Noise Figure NF Gain 1dB Compression Output Power Po(1dB) Upper Limit Operating Frequency fu typ max 4.3 6.0 7.7 f=1GHz 21.0 23.5 26.0 f=2.2GHz 22.0 24.5 27.0 f=1GHz 33.0 38.0 f=2.2GHz 40.0 45.0 f=1GHz 18.0 23.0 f=2.2GHz 10.0 13.0 f=1GHz 27.0 32.0 f=2.2GHz 10.0 13.0 dB 3.1 4.3 3.6 4.3 3dB down below flat gain at f =1GHz --10 --8 --11.5 --9.5 2.8 dB dB f=2.2GHz f=2.2GHz mA dB f=1GHz f=1GHz Unit dB dBm GHz Note) Pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopted. Ordering Information Device SMA3107-TL-E Package Shipping memo MCPH6 3,000pcs./reel Pb Free Test Circuit 100pF IN 6 5 4 1 2 3 100pF OUT 1000pF VCC Connect 2, 4 and 5 with GND. IT15570 No. A1753-2/7 SMA3107 Evaluation Board IN OUT C1 C2 C3 VCC Symbol C1, C2 C3 100pF 1000pF ICC -- VCC 10 Circuit Current, ICC -- mA Value 8 6 4 2 0 0 1 2 3 Circuit Voltage, VCC -- V 4 IT15571 Gp -- f 35 RLin -- f 0 3.3V Power Gain , Gp -- dB 3.0V Input Return Loss, RLin -- dB 30 3.3V 25 2.7V 20 15 10 5 0 1000 2000 Frequency, f -- MHz 3000 4000 IT15572 3.0V --10 V 2.7 --20 --30 --40 --50 0 1000 2000 Frequency, f -- MHz 3000 4000 IT15573 No. A1753-3/7 SMA3107 3.3 V --60 --70 0 1000 2000 3000 0 1000 2000 3000 4000 Frequency, f -- MHz 0 IT15575 Pout -- Pin 5 VCC=3.0V f=1.0GHz VCC=3.0V f=2.2GHz 0 Output Level, Pout -- dBm Output Level, Pout -- dBm --40 IT15574 Pout -- Pin 5 --30 --50 4000 Frequency, f -- MHz --20 V 3.0V 3.3 2.7V --40 --10 3.0V Output Return Loss, RLout -- dB Isolation, ISL -- dB --30 --50 RLout -- f 0 2.7 V ISL -- f --20 --5 --10 --15 --20 --5 --10 --15 --20 --25 --60 --50 --40 --20 --30 --10 Input Level, Pin -- dBm --25 --60 0 --50 --40 --20 --30 --10 Input Level, Pin -- dBm IT15576 0 IT15577 S Parameter S11 S22 50 50 100 25 250 10 0 250 10 3GHz 3GHz 2GHz 25 10 50 100 100 25 250 10 0 1GHz 25 50 1GHz 100 250 2GHz --10 --250 --25 --10 --250 --25 --100 --50 IT15578 --100 --50 IT15579 No. A1753-4/7 SMA3107 Embossed Taping Specification SMA3107-TL-E No. A1753-5/7 SMA3107 Outline Drawing SMA3107-TL-E Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No. A1753-6/7 SMA3107 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A1753-7/7