2N5883 D

2N5883, 2N5884 (PNP)
2N5885, 2N5886 (NPN)
2N5884 and 2N5886 are Preferred Devices
Complementary Silicon
High−Power Transistors
Complementary silicon high−power transistors are designed for
general−purpose power amplifier and switching applications.
Features
25 AMPERE COMPLEMENTARY
SILICON POWER TRANSISTORS
60 − 80 VOLTS, 200 WATTS
• Low Collector−Emitter Saturation Voltage −
•
•
•
•
http://onsemi.com
VCE(sat) = 1.0 Vdc, (max) at IC = 15 Adc
Low Leakage Current
ICEX = 1.0 mAdc (max) at Rated Voltage
Excellent DC Current Gain −
hFE = 20 (min) at IC = 10 Adc
High Current Gain Bandwidth Product −
ft = 4.0 MHz (min) at IC = 1.0 Adc
Pb−Free Packages are Available*
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎ
Î
ÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎ
ÎÎ
TO−204AA (TO−3)
CASE 1−07
STYLE 1
MAXIMUM RATINGS (Note 1)
Rating
Symbol
Collector−Emitter Voltage
2N5883, 2N5885
2N5884, 2N5886
VCEO
Collector−Base Voltage
Value
Unit
Vdc
60
80
VCB
2N5883, 2N5885
2N5884, 2N5886
Emitter−Base Voltage
Vdc
60
80
VEB
5.0
Vdc
Collector Current −
Continuous
Peak
IC
Base Current
IB
7.5
Adc
Total Device Dissipation @ TC = 25°C
Derate above 25°C
PD
200
1.15
W
W/°C
TJ, Tstg
– 65 to + 200
°C
Operating and Storage Junction
Temperature Range
MARKING DIAGRAM
2N588xG
AYYWW
MEX
Adc
25
50
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction−to−Case
qJC
0.875
°C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Indicates JEDEC registered data. Units and conditions differ on some
parameters and re−registration reflecting these changes has been requested.
All above values most or exceed present JEDEC registered data.
2N588x
G
A
YY
WW
MEX
= Device Code
x = 3, 4, 5, or 6
= Pb−Free Package
= Assembly Location
= Year
= Work Week
= Country of Origin
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
March, 2006 − Rev. 11
1
Publication Order Number:
2N5883/D
2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎ
ELECTRICAL CHARACTERISTICS (Note 2) (TC = 25°C unless otherwise noted)
Characteristic
Collector−Emitter Sustaining Voltage (Note 3)
(IC = 200 mAdc, IB = 0)
2N5883, 2N5885
2N5884, 2N5886
Collector Cutoff Current
(VCE = 30 Vdc, IB = 0)
(VCE = 40 Vdc, IB = 0)
2N5883, 2N5885
2N5984, 2N5886
Collector Cutoff Current
(VCE = 60 Vdc, VBE(off) = 1.5 Vdc)
(VCE = 80 Vdc, VBE(off) = 1.5 Vdc)
(VCE = 60 Vdc, VBE(off) = 1.5 Vdc, TC = 150°C)
(VCE = 80 Vdc, VBE(off) = 1.5 Vdc, TC = 150°C)
2N5883, 2N5885
2N5884, 2N5886
2N5883, 2N5885
2N5884, 2N5886
Collector Cutoff Current
(VCB = 60 Vdc, IE = 0)
(VCB = 80 Vdc, IE = 0)
2N5883, 2N5885
2N5884, 2N5886
Symbol
Min
Max
Unit
VCEO(sus)
60
80
−
−
Vdc
−
−
2.0
2.0
mAdc
−
−
−
−
1.0
1.0
10
10
mAdc
−
−
1.0
1.0
mAdc
−
1.0
mAdc
35
20
4.0
−
100
−
−
−
1.0
4.0
Vdc
ICEO
ICEX
ICBO
Emitter Cutoff Current (VEB = 5.0 Vdc, IC = 0)
IEBO
ON CHARACTERISTICS
DC Current Gain (Note 3)
(IC = 3.0 Adc, VCE = 4.0 Vdc)
(IC = 10 Adc, VCE = 4.0 Vdc)
(IC = 25 Adc, VCE = 4.0 Vdc)
hFE
Collector−Emitter Saturation Voltage (Note 3)
(IC = 15 Adc, IB = 1.5 Adc)
(IC = 25 Adc, IB = 6.25 Adc)
VCE(sat)
Base−Emitter Saturation Voltage (Note 3)
VBE(sat)
−
2.5
Vdc
VBE(on)
−
1.5
Vdc
Base−Emitter On Voltage (Note 3)
(IC = 25 Adc, IB = 6.25 Adc)
(IC = 10 Adc, VCE = 4.0 Vdc)
DYNAMIC CHARACTERISTICS
Current−Gain − Bandwidth Product (Note 4)
(IC = 1.0 Adc, VCE = 10 Vdc, ftest = 1.0 MHz)
Output Capacitance
(VCB = 10 Vdc, IE = 0, f = 1.0 MHz)
2N5883, 2N5884
2N5885, 2N5886
Small−Signal Current Gain (IC = 3.0 Adc, VCE = 4.0 Vdc, ftest = 1.0 kHz)
fT
4.0
−
MHz
Cob
−
−
1000
500
pF
hfe
20
−
−
tr
−
0.7
ms
ts
−
1.0
ms
tf
−
0.8
ms
SWITCHING CHARACTERISTICS
Rise Time
(VCC = 30 Vdc, IC = 10 Adc, IB1 = IB2 = 1.0 Adc)
Storage Time
Fall Time
2. Indicates JEDEC Registered Data.
3. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%.
4. fT = |hfe| • ftest.
PD, POWER DISSIPATION (WATTS)
200
175
150
125
100
75
50
25
0
0
25
50
75
100
125
150
TC, CASE TEMPERATURE (°C)
Figure 1. Power Derating
http://onsemi.com
2
175
200
2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN)
VCC
−30 V
TURN−ON TIME
RL
+2.0 V
3.0
10
0
TO SCOPE
tr ≤ 20 ns
RB
tr ≤
20ns
2.0
−11V
0.7
0.5
10 to 100 ms
VCC
TURN−OFF TIME
RL
+9.0V
10
3.0
TO SCOPE
tr ≤ 20 ns
0
RB
tr ≤ 20ns
10 to 100 ms
−30 V
t, TIME (s)
μ
DUTY CYCLE ≈ 2.0%
−11V
TJ = 25°C
IC/IB = 10
VCC = 30 V
VBE(off) = 2 V
1.0
0.3
tr
0.2
0.1
2N5883, 2N5884 (PNP)
2N5885, 2N5886 (NPN)
td
0.07
0.05
0.03
VBB
+7.0 V
0.02
0.3
DUTY CYCLE ≈ 2.0%
0.5 0.7 1.0
2.0 3.0
5.0 7.0 10
IC, COLLECTOR CURRENT (AMPERES)
FOR CURVES OF FIGURES 3 & 6, RB & RL ARE VARIED.
INPUT LEVELS ARE APPROXIMATELY AS SHOWN.
FOR NPN, REVERSE ALL POLARITIES.
20
30
Figure 3. Turn−On Time
Figure 2. Switching Time Equivalent Test Circuits
r(t), EFFECTIVE TRANSIENT THERMAL
RESISTANCE (NORMALIZED)
1.0
0.5
D = 0.5
0.2
0.2
0.1
0.1
0.05
0.05
0.02
0.02
SINGLE PULSE
P(pk)
qJC(t) = r(t) qJC
qJC = 0.875°C/W MAX
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
t1
READ TIME AT t1
t2
TJ(pk) − TC = P(pk) qJC(t)
DUTY CYCLE, D = t1/t2
0.01
0.01
0.02
0.05
0.1
0.2
0.5
1.0
2.0
5.0
10
t, TIME (ms)
20
50
100
200
500
1000
2000
Figure 4. Thermal Response
IC, COLLECTOR CURRENT (AMPERES)
100
There are two limitations on the power handling ability of
a transistor: average junction temperature and second
breakdown. Safe operating area curves indicate I C − V CE
limits of the transistor that must be observed for reliable
operation; i.e., the transistor must not be subjected to greater
dissipation than the curves indicate.
The data of Figure 5 is based on T J(pk) = 200°C; TC is
variable depending on conditions. Second breakdown pulse
limits are valid for duty cycles to 10% provided T J(pk)
v 200°C. T J(pk) may be calculated from the data in
Figure 4. At high case temperatures, thermal limitations will
reduce the power that can be handled to values less than the
limitations imposed by second breakdown.
500 ms
50
1ms
20
dc
10
5ms
TJ = 200°C
SECOND BREAKDOWN LIMITED
BONDING WIRE LIMITED
THERMAL LIMITATION @ TC = 25°C
(SINGLE PULSE)
CURVES APPLY BELOW RATED VCEO
5.0
2.0
1.0
0.5
0.2
0.1
1.0
2N5883, 2N5885
2N5884, 2N5886
2.0 3.0
5.0 7.0 10
20 30
50 70
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
100
Figure 5. Active−Region Safe Operating Area
http://onsemi.com
3
2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN)
3000
2N5883, 2N5884 (PNP)
2N5885, 2N5886 (NPN)
3.0
ts
2.0
t, TIME (s)
μ
TJ = 25°C
VCC = 30 V
IC/IB = 10
IB1 = IB2
TJ = 25°C
2000
C, CAPACITANCE (pF)
10
7.0
5.0
ts
1.0
0.7
0.5
tf
0.3
Cob
Cib
1000
500
tf
0.2
0.1
0.3
0.5 0.7
Cib
700
2N5883, 2N5884 (PNP)
2N5885, 2N5886 (NPN)
1.0
2.0 3.0
5.0 7.0 10
IC, COLLECTOR CURRENT (AMPERES)
20
300
0.1
30
0.2
0.5
1.0 2.0
5.0
10
20
VR, REVERSE VOLTAGE (VOLTS)
PNP DEVICES
2N5883 and 2N5884
VCE = 4.0 V
hFE , DC CURRENT GAIN
hFE , DC CURRENT GAIN
1000
700
500
300
25°C
−55 °C
100
70
50
30
VCE = 4.0 V
TJ = 150°C
300
200
100
70
50
25°C
30
−55 °C
20
20
10
0.3
0.5 0.7 1.0
2.0 3.0
5.0 7.0 10
IC, COLLECTOR CURRENT (AMPERES)
10
0.3
20 30
0.5 0.7
2.0
TJ = 25°C
1.6
IC = 2.0 A
5.0 A
10 A
20 A
1.2
0.8
0.4
0
0.01
0.02
0.05 0.1
0.5
0.2
1.0
IB, BASE CURRENT (AMPERES)
1.0
2.0 3.0
5.0 7.0 10
IC, COLLECTOR CURRENT (AMPERES)
20
30
Figure 9. DC Current Gain
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
Figure 8. DC Current Gain
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
100
NPN DEVICES
2N5885 and 2N5886
TJ = 150°C
200
50
Figure 7. Capacitance
Figure 6. Turn−Off Time
1000
700
500
Cob
2.0
5.0
10
2.0
TJ = 25°C
1.6
1.2
IC = 2.0 A
5.0 A
10 A
20 A
0.8
0.4
0
0.01
0.02
0.05
0.1
0.2
0.5
1.0
2.0
5.0
IB, COLLECTOR CURRENT (AMPERES)
Figure 10. Collector Saturation Region
Figure 11. Collector Saturation Region
http://onsemi.com
4
10
2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN)
2.0
2.0
TJ = 25°C
TJ = 25°C
1.6
V, VOLTAGE (VOLTS)
V, VOLTAGE (VOLTS)
1.6
1.2
VBE(sat) @ IC/IB = 10
0.8
VBE @ VCE = 4 V
0.4
1.2
VBE(sat) @ IC/IB = 10
0.8
VBE @ VCE = 4 V
0.4
VCE(sat) @ IC/IB = 10
0
0.3
0.5 0.7 1.0
2.0 3.0
VCE(sat) @ IC/IB = 10
5.0 7.0
10
20
0
30
0.3
IC, COLLECTOR CURRENT (AMPERES)
0.5 0.7 1.0
2.0 3.0
5.0 7.0
10
IC, COLLECTOR CURRENT (AMPERES)
Figure 12. “On” Voltages
Figure 13. “On” Voltages
ORDERING INFORMATION
Device
2N5883
2N5883G
2N5884
2N5884G
Package
Shipping
TO−204
TO−204
(Pb−Free)
TO−204
TO−204
(Pb−Free)
100 Units / Tray
2N5885
2N5885G
2N5886
2N5886G
TO−204
TO−204
(Pb−Free)
TO−204
TO−204
(Pb−Free)
http://onsemi.com
5
20
30
2N5883, 2N5884 (PNP) 2N5885, 2N5886 (NPN)
PACKAGE DIMENSIONS
TO−204 (TO−3)
CASE 1−07
ISSUE Z
A
N
C
−T−
E
D
SEATING
PLANE
K
2 PL
0.13 (0.005)
U
T Q
M
M
Y
M
−Y−
L
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
REFERENCED TO−204AA OUTLINE SHALL APPLY.
2
H
G
B
M
T Y
1
−Q−
0.13 (0.005)
DIM
A
B
C
D
E
G
H
K
L
N
Q
U
V
INCHES
MIN
MAX
1.550 REF
−−− 1.050
0.250
0.335
0.038
0.043
0.055
0.070
0.430 BSC
0.215 BSC
0.440
0.480
0.665 BSC
−−− 0.830
0.151
0.165
1.187 BSC
0.131
0.188
MILLIMETERS
MIN
MAX
39.37 REF
−−− 26.67
6.35
8.51
0.97
1.09
1.40
1.77
10.92 BSC
5.46 BSC
11.18
12.19
16.89 BSC
−−− 21.08
3.84
4.19
30.15 BSC
3.33
4.77
STYLE 1:
PIN 1. BASE
2. EMITTER
CASE: COLLECTOR
M
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
Literature Distribution Center for ON Semiconductor
USA/Canada
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Phone: 81−3−5773−3850
Email: [email protected]
http://onsemi.com
6
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
2N5883/D