NGTB30N135IHR D

NGTB30N135IHRWG
IGBT with Monolithic Free
Wheeling Diode
This Insulated Gate Bipolar Transistor (IGBT) features a robust and
cost effective Field Stop (FS) Trench construction, provides superior
performance in demanding switching applications, and offers low
on−state voltage with minimal switching losses. The IGBT is well
suited for resonant or soft switching applications.
http://onsemi.com
30 A, 1350 V
VCEsat = 2.30 V
Eoff = 0.85 mJ
Features
•
•
•
•
•
Extremely Efficient Trench with Fieldstop Technology
1350 V Breakdown Voltage
Optimized for Low Losses in IH Cooker Application
Reliable and Cost Effective Single Die Solution
These are Pb−Free Devices
C
Typical Applications
• Inductive Heating
• Consumer Appliances
• Soft Switching
G
E
ABSOLUTE MAXIMUM RATINGS
Rating
Collector−emitter voltage @
TJ = 25°C
Symbol
Value
Unit
VCES
1350
V
Collector current
@ TC = 25°C
@ TC = 100°C
IC
A
Pulsed collector current, Tpulse
limited by TJmax 10 ms pulse,
VGE = 15 V
ICM
Diode forward current
@ TC = 25°C
@ TC = 100°C
IF
Diode pulsed current, Tpulse limited
by TJmax 10 ms pulse,
VGE = 0 V
IFM
120
A
Gate−emitter voltage
Transient Gate−emitter Voltage
(Tpulse = 5 ms, D < 0.10)
VGE
$20
±25
V
Power Dissipation
@ TC = 25°C
@ TC = 100°C
PD
Operating junction temperature
range
TJ
−40 to +175
°C
Storage temperature range
Tstg
−55 to +175
°C
Lead temperature for soldering, 1/8”
from case for 5 seconds
TSLD
260
°C
60
30
120
August, 2013 − Rev. 0
C
TO−247
CASE 340AL
E
A
A
60
30
MARKING DIAGRAM
30N135IHR
AYWWG
W
394
197
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
© Semiconductor Components Industries, LLC, 2013
G
1
A
Y
WW
G
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping
NGTB30N135IHRWG
TO−247
(Pb−Free)
30 Units / Rail
Publication Order Number:
NGTB30N135IHR/D
NGTB30N135IHRWG
THERMAL CHARACTERISTICS
Symbol
Value
Unit
Thermal resistance junction−to−case
Rating
RqJC
0.38
°C/W
Thermal resistance junction−to−ambient
RqJA
40
°C/W
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Test Conditions
Symbol
Min
Typ
Max
Unit
VGE = 0 V, IC = 5 mA
V(BR)CES
1350
−
−
V
VGE = 15 V, IC = 30 A
VGE = 15 V, IC = 30 A, TJ = 175°C
VCEsat
−
−
2.30
2.50
2.65
−
V
VGE = VCE, IC = 250 mA
VGE(th)
4.5
5.5
6.5
V
Collector−emitter cut−off current, gate−
emitter short−circuited
VGE = 0 V, VCE = 1350 V
VGE = 0 V, VCE = 1350 V, TJ = 175°C
ICES
−
−
−
−
0.5
2.0
mA
Gate leakage current, collector−emitter
short−circuited
VGE = 20 V, VCE = 0 V
IGES
−
−
100
nA
Cies
−
5290
−
pF
Coes
−
124
−
Cres
−
100
−
Gate charge total
Qg
−
234
−
Gate to emitter charge
Qge
−
39
−
Qgc
−
105
−
TJ = 25°C
VCC = 600 V, IC = 30 A
Rg = 10 W
VGE = 0 V/ 15V
td(off)
−
250
−
tf
−
150
−
Eoff
−
0.85
−
mJ
TJ = 150°C
VCC = 600 V, IC = 30 A
Rg = 10 W
VGE = 0 V/ 15V
td(off)
−
265
−
ns
tf
−
225
−
Eoff
−
1.90
−
mJ
VGE = 0 V, IF = 30 A
VGE = 0 V, IF = 30 A, TJ = 175°C
VF
−
−
2.10
3.20
2.40
−
V
STATIC CHARACTERISTIC
Collector−emitter breakdown voltage,
gate−emitter short−circuited
Collector−emitter saturation voltage
Gate−emitter threshold voltage
DYNAMIC CHARACTERISTIC
Input capacitance
Output capacitance
VCE = 20 V, VGE = 0 V, f = 1 MHz
Reverse transfer capacitance
VCE = 600 V, IC = 30 A, VGE = 15 V
Gate to collector charge
nC
SWITCHING CHARACTERISTIC, INDUCTIVE LOAD
Turn−off delay time
Fall time
Turn−off switching loss
Turn−off delay time
Fall time
Turn−off switching loss
ns
DIODE CHARACTERISTIC
Forward voltage
http://onsemi.com
2
NGTB30N135IHRWG
TYPICAL CHARACTERISTICS
250
TJ = 25°C
13 V
VGE = 20 to 15 V
200
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
250
11 V
150
10 V
100
9V
50
0
8V
1
2
3
4
6
5
7
11 V
10 V
100
9V
50
8V
7V
0
8
0
1
2
3
4
6
5
7
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 1. Output Characteristics
Figure 2. Output Characteristics
8
160
13 V
11 V
IC, COLLECTOR CURRENT (A)
VGE = 20 to 15 V
200
10 V
150
100
9V
50
0
0
1
7V
8V
TJ = −40°C
2
3
4
5
6
7
140
TJ = 25°C
120
100
TJ = 150°C
80
60
40
20
0
8
0
1
2
3
4
5
6
7
8
9 10
11 12 13
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VGE, GATE−EMITTER VOLTAGE (V)
Figure 3. Output Characteristics
Figure 4. Typical Transfer Characteristics
4.00
100000
3.50
IC = 60 A
3.00
IC = 30 A
2.50
IC = 15 A
2.00
1.50
1.00
C, CAPACITANCE (pF)
IC, COLLECTOR CURRENT (A)
13 V
150
250
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VGE = 20 to 15 V
200
7V
0
TJ = 150°C
10000
Cies
1000
Coes
100
Cres
10
0.50
0.00
−75 −50 −25
0
25
50
75
1
100 125 150 175 200
TJ = 25°C
0
10
20
30
40
50
60
70
80
90 100
TJ, JUNCTION TEMPERATURE (°C)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 5. VCE(sat) vs. TJ
Figure 6. Typical Capacitance
http://onsemi.com
3
NGTB30N135IHRWG
TYPICAL CHARACTERISTICS
16
VGE, GATE−EMITTER VOLTAGE (V)
IF, FORWARD CURRENT (A)
70
60
50
40
TJ = 25°C
30
20
TJ = 150°C
10
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
10
8
6
4
VCE = 600 V
VGE = 15 V
IC = 30 A
2
0
0
50
100
200
150
VF, FORWARD VOLTAGE (V)
QG, GATE CHARGE (nC)
Figure 7. Diode Forward Characteristics
Figure 8. Typical Gate Charge
250
1000
2
SWITCHING TIME (ns)
SWITCHING LOSS (mJ)
12
4.0
2.5
Eoff
1.5
1
VCE = 600 V
VGE = 15 V
IC = 30 A
Rg = 10 W
0.5
0
0
20
40
60
80
100
120
140
100
VCE = 600 V
VGE = 15 V
IC = 30 A
Rg = 10 W
0
40
60
80
Figure 9. Switching Loss vs. Temperature
Figure 10. Switching Time vs. Temperature
1000
Eoff
4
3
2
td(off)
tf
100
VCE = 600 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
1
0
5
20
TJ, JUNCTION TEMPERATURE (°C)
SWITCHING TIME (ns)
5
tf
TJ, JUNCTION TEMPERATURE (°C)
VCE = 600 V
VGE = 15 V
TJ = 150°C
Rg = 10 W
6
td(off)
10
160
7
SWITCHING LOSS (mJ)
14
20
35
50
65
10
80
5
20
35
50
65
IC, COLLECTOR CURRENT (A)
IC, COLLECTOR CURRENT (A)
Figure 11. Switching Loss vs. IC
Figure 12. Switching Time vs. IC
http://onsemi.com
4
80
NGTB30N135IHRWG
TYPICAL CHARACTERISTICS
10000
2.5
Eoff
2
1.5
1
VCE = 600 V
VGE = 15 V
TJ = 150°C
IC = 30 A
0.5
0
5
15
25
35
45
55
65
75
SWITCHING TIME (ns)
SWITCHING LOSS (mJ)
3
1000
tf
100
10
85
15
25
35
45
55
65
75
Figure 13. Switching Loss vs. Rg
Figure 14. Switching Time vs. Rg
85
1000
1.5
1
IC = 30 A
VGE = 15 V
TJ = 150°C
Rg = 10 W
0.5
td(off)
SWITCHING TIME (ns)
Eoff
IC = 30 A
VGE = 15 V
TJ = 150°C
Rg = 10 W
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 15. Switching Loss vs. VCE
Figure 16. Switching Time vs. VCE
1000
100 ms
IC, COLLECTOR CURRENT (A)
1 ms
100
50 ms
dc operation
1
Single Nonrepetitive
Pulse TC = 25°C
Curves must be derated
linearly with increase
in temperature
0.1
1
10
250 300 350 400 450 500 550 600 650 700 750 800
VCE, COLLECTOR−EMITTER VOLTAGE (V)
1000
10
tf
100
0
250 300 350 400 450 500 550 600 650 700 750 800
IC, COLLECTOR CURRENT (A)
5
Rg, GATE RESISTOR (W)
2
0.01
VCE = 600 V
VGE = 15 V
TJ = 150°C
IC = 30 A
Rg, GATE RESISTOR (W)
2.5
SWITCHING LOSS (mJ)
td(off)
10
100
VGE = 15 V, TC = 125°C
100
10
1
1000
1
10
100
1000
VCE, COLLECTOR−EMITTER VOLTAGE (V)
VCE, COLLECTOR−EMITTER VOLTAGE (V)
Figure 17. Safe Operating Area
Figure 18. Reverse Bias Safe Operating Area
http://onsemi.com
5
NGTB30N135IHRWG
TYPICAL CHARACTERISTICS
140
1650
120
1600
TC = 80°C
80
1550
V(BR)CES (V)
Ipk (A)
100
TC = 110°C
60
40
20
1500
1450
1400
VCE = 600 V, TJ ≤ 175°C, Rgate = 10 W,
VGE = 0/15 V, Tcase = 80°C or 110°C
(as noted), D = 0.5
0
0.01
0.1
1
10
1350
100
1300
−40
1000
−15
10
35
60
85
110
135
FREQUENCY (kHz)
TJ, JUNCTION TEMPERATURE (°C)
Figure 19. Collector Current vs. Switching
Frequency
Figure 20. Typical V(BR)CES vs. Temperature
1
RqJC = 0.385
50% Duty Cycle
Ri (°C/W)
R(t) (°C/W)
0.1 20%
Junction R1
10%
5%
0.01
Rn
C2
Cn
Ci = ti/Ri
2%
C1
Duty Factor = t1/t2
Peak TJ = PDM x ZqJC + TC
Single Pulse
0.001
0.000001
R2
0.00001
0.0001
0.001
0.01
PULSE TIME (sec)
Figure 21. IGBT Transient Thermal Impedance
http://onsemi.com
6
0.1
Case
ti (sec)
0.005757 0.000174
0.000122 0.025884
0.007153 0.001398
0.010643 0.002971
0.016539 0.006046
0.048615 0.006505
0.019522 0.051225
0.015924 0.198582
0.051783 0.193115
0.025689 1.23097
0.180713 0.553364
1
10
NGTB30N135IHRWG
Figure 22. Test Circuit for Switching Characteristics
http://onsemi.com
7
NGTB30N135IHRWG
Figure 23. Definition of Turn On Waveform
http://onsemi.com
8
NGTB30N135IHRWG
Figure 24. Definition of Turn Off Waveform
http://onsemi.com
9
NGTB30N135IHRWG
PACKAGE DIMENSIONS
TO−247
CASE 340AL
ISSUE A
E
E2/2
B
A
NOTE 4
SEATING
PLANE
Q
E2
D
2
B A
4
DIM
A
A1
b
b2
b4
c
D
E
E2
e
L
L1
P
Q
S
3
L1
NOTE 5
L
2X
b2
c
b4
3X
e
b
0.25
A1
NOTE 7
M
B A
M
NOTE 6
S
NOTE 3
1
M
P
A
NOTE 4
0.635
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. SLOT REQUIRED, NOTCH MAY BE ROUNDED.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH.
MOLD FLASH SHALL NOT EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE MEASURED AT THE OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. LEAD FINISH IS UNCONTROLLED IN THE REGION DEFINED BY
L1.
6. ∅P SHALL HAVE A MAXIMUM DRAFT ANGLE OF 1.5° TO THE
TOP OF THE PART WITH A MAXIMUM DIAMETER OF 3.91.
7. DIMENSION A1 TO BE MEASURED IN THE REGION DEFINED
BY L1.
M
MILLIMETERS
MIN
MAX
4.70
5.30
2.20
2.60
1.00
1.40
1.65
2.35
2.60
3.40
0.40
0.80
20.30
21.40
15.50
16.25
4.32
5.49
5.45 BSC
19.80
20.80
3.50
4.50
3.55
3.65
5.40
6.20
6.15 BSC
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
10
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NGTB30N135IHR/D