MUR1620CTR D

MUR1620CTRG,
MURB1620CTRG,
NRVUB1620CTRT4G
Switch Mode
Power Rectifier
These state−of−the−art devices are designed for use in negative
switching power supplies, inverters and as free wheeling diodes. Also,
used in conjunction with common cathode dual Ultrafast Rectifiers,
makes a single phase full−wave bridge.
www.onsemi.com
ULTRAFAST RECTIFIER
16 AMPERES, 200 VOLTS
Features
•
•
•
•
•
•
•
•
•
•
•
Common Anode Dual Rectifier (8.0 A per Leg or 16 A per Package)
Ultrafast 35 Nanosecond Reverse Recovery Times
Exhibits Soft Recovery Characteristics
High Temperature Glass Passivated Junction
Low Leakage Specified @ 150°C Case Temperature
Current Derating @ Both Case and Ambient Temperatures
Epoxy Meets UL 94 V−0 @ 0.125 in
Complement to MUR1620CT and MURB1620CT Common Cathode
Device
ESD Ratings:
♦ Machine Model = C (> 400 V)
♦ Human Body Model = 3B (> 16,000 V)
NRVU Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These are Pb−Free Devices*
TO−220AB
CASE 221A
STYLE 7
D2PAK
CASE 418AJ
1
2, 4
3
MARKING DIAGRAMS
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: MUR1620CTR: 1.9 Grams (Approximately)
MURB1620CTR: 1.7 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
AYWW
U1620RG
KAK
AYWW
U1620RG
KAK
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
TO−220AB
D2PAK
U1620R = Device Code
KAK
= Diode Polarity
A
= Assembly Location
Y
= Year
WW
= Work Week
G
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2015
January, 2015 − Rev. 9
1
Publication Order Number:
MUR1620CTR/D
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
MAXIMUM RATINGS (Per Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
200
V
Average Rectified Forward Current
(Rated VR, TC = 160°C)
Per Leg
Per Total Device
IF(AV)
A
8.0
16
Peak Repetitive Surge Current
(Rated VR, Square Wave, 20 kHz, TC = 140°C)
Per Diode
IFM
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
IFSM
100
A
TJ, Tstg
−65 to +175
°C
16
Operating Junction and Storage Temperature Range
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (Per Leg)
Characteristic
Thermal Resistance, Junction−to−Case
Thermal Resistance, Junction−to−Ambient
(D2PAK)
Symbol
Value
Unit
RqJC
2.0
°C/W
RqJA
45
°C/W
Symbol
Value
Unit
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic
Maximum Instantaneous Forward Voltage (Note 1)
(iF = 8.0 Amps, TC = 25°C)
(iF = 8.0 Amps, TC = 150°C)
vF
Maximum Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, TC = 25°C)
(Rated dc Voltage, TC = 150°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 Amp, di/dt = 50 Amps/ms)
trr
V
1.2
1.1
mA
5.0
500
ns
85
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 5.0 ms, Duty Cycle ≤ 10%.
ORDERING INFORMATION
Package
Shipping†
MUR1620CTRG
TO−220
(Pb−Free)
50 Units / Rail
MURB1620CTRG
D2PAK−3
(Pb−Free)
50 Units / Rail
MURB1620CTRT4G
D2PAK−3
(Pb−Free)
800 / Tape & Reel
NRVUB1620CTRT4G
D2PAK−3
(Pb−Free)
800 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
2
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
100
70
50
30
20
10
7.0
TJ = 175°C
150°C
100°C
* The curves shown are typical for the highest
voltage device in the voltage grouping. Typical
reverse current for lower voltage selections can
be estimated from these same curves if VR is
sufficiently below rated VR.
25°C
0
20
5.0
40
60
80
100 120 140 160 180 200
VR, REVERSE VOLTAGE (VOLTS)
Figure 2. Typical Reverse Current* (Per Leg)
150°C
3.0
100°C
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
2.0
25°C
1.0
0.7
0.5
0.3
0.2
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
16
14
RATED VR APPLIED
12
RqJC = 2°C/W
10
8.0
dc
SQUARE WAVE
6.0
4.0
2.0
0
140
150
160
170
vF, INSTANTANEOUS VOLTAGE (VOLTS)
TC, CASE TEMPERATURE (°C)
Figure 1. Typical Forward Voltage (Per Leg)
Figure 3. Current Derating, Case (Per Leg)
PF(AV), AVERAGE POWER DISSIPATION (WATTS)
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
TJ = 175°C
IR, REVERSE CURRENT (mA)
1000
500
200
100
50
20
10
5
2
1
0.5
0.2
0.1
0.05
0.02
0.01
16
TJ = 175°C
14
12
SQUARE
WAVE
10
8.0
dc
6.0
4.0
2.0
0
0
2.0
4.0
6.0
8.0
10
12
14
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Power Dissipation (Per Leg)
www.onsemi.com
3
16
180
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
r(t), TRANSIENT THERMAL RESISTANCE
(NORMALIZED)
1.0
D = 0.5
0.5
0.1
0.2
0.05
0.1
ZqJC(t) = r(t) RqJC
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT T1
P(pk)
0.01
0.05
t1
t2
SINGLE PULSE
0.02
DUTY CYCLE, D = t1/t2
TJ(pk) − TC = P(pk) ZqJC(t)
0.01
0.01 0.02
0.05
0.1
0.2
0.5
1.0
2.0
5.0
10
20
50
100
200
500 1000
t, TIME (ms)
Figure 5. Thermal Response
100
50% Duty Cycle
R(t) (°C/W)
10
1
20%
10%
5%
2%
1%
0.1
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
PULSE TIME (sec)
Figure 6. Thermal Response, Junction−to−Ambient
1000
900
800
C, CAPACITANCE (pF)
0.001
700
600
500
400
300
200
100
0
0.1
0.2 0.3
0.5 0.7 1.0
0.2 0.3
0.5 0.7 10
VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Typical Capacitance (Per Leg)
www.onsemi.com
4
20
30
50
70 100
1000
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
PACKAGE DIMENSIONS
D2PAK−3 (TO−263, 3−LEAD)
CASE 418AJ
ISSUE B
B
E2
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. CHAMFER OPTIONAL
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH. MOLD FLASH SHALL NOT EXCEED 0.005
PER SIDE. THESE DIMENSIONS ARE MEASURED
AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY AT DATUM H.
5. THERMAL PAD CONTOUR IS OPTIONAL WITHIN
DIMENSIONS E, L1, D1 AND E1.
6. OPTIONAL MOLD FEATURE
A
A
E
SEATING
PLANE
L1
c2
NOTE 3
A
D1
L1
D
H
DETAIL C
E1
0.10
M
B A
M
L2
A
e
c
NOTE 6
2X
TOP VIEW
b
0.10
VIEW A−A
SIDE VIEW
M
B A
M
H
GAUGE
PLANE
L3
A1
L
M
B
SEATING
PLANE
DIM
A
A1
b
c
c2
D
D1
E
E1
e
H
L
L1
L2
L3
M
DETAIL C
RECOMMENDED
SOLDERING FOOTPRINT*
VIEW A−A
OPTIONAL CONSTRUCTIONS
0.436
0.366
0.653
2X
0.169
2X
0.063
0.100
PITCH
DIMENSIONS: INCHES
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
5
INCHES
MIN
MAX
0.160 0.190
0.000 0.010
0.020 0.039
0.012 0.029
0.045 0.065
0.330 0.380
0.260
−−−−
0.380 0.420
0.245
−−−−
0.100 BSC
0.575 0.625
0.070
0.110
−−−− 0.066
−−−− 0.070
0.010 BSC
0°
8°
MILLIMETERS
MIN
MAX
4.06
4.83
0.00
0.25
0.51
0.99
0.30
0.74
1.14
1.65
8.38
9.65
6.60
−−−−
9.65 10.67
6.22
−−−−
2.54 BSC
14.60 15.88
1.78
2.79
−−−−
1.68
−−−−
1.78
0.25 BSC
0°
8°
MUR1620CTRG, MURB1620CTRG, NRVUB1620CTRT4G
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AH
−T−
B
SEATING
PLANE
C
F
T
S
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
4
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
A
Q
1 2 3
U
H
K
Z
L
R
V
J
G
D
N
INCHES
MIN
MAX
0.570
0.620
0.380
0.415
0.160
0.190
0.025
0.038
0.142
0.161
0.095
0.105
0.110
0.161
0.014
0.024
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
----0.080
STYLE 7:
PIN 1.
2.
3.
4.
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.53
4.07
4.83
0.64
0.96
3.61
4.09
2.42
2.66
2.80
4.10
0.36
0.61
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
----2.04
CATHODE
ANODE
CATHODE
ANODE
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MUR1620CTR/D