AON6552 30V N-Channel AlphaMOS General Description Product Summary • Latest Trench Power AlphaMOS (αMOS LV) technology • Very Low RDS(on) at 4.5VGS • Low Gate Charge • High Current Capability • RoHS and Halogen-Free Compliant Application • DC/DC Converters in Computing, Servers, and POL • Isolated DC/DC Converters in Telecom and Industrial VDS ID (at VGS=10V) 30V 30A RDS(ON) (at VGS=10V) < 5mΩ RDS(ON) (at VGS = 4.5V) < 8.5mΩ 100% UIS Tested 100% Rg Tested DFN5X6 Top View D Top View Bottom View 1 8 2 7 3 6 4 5 G S PIN1 Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage VGS TC=25°C Continuous Drain CurrentG Pulsed Drain Current C Avalanche Current C V 23 A 23 IDSM TA=70°C ±20 120 IDM TA=25°C Continuous Drain Current Units V 30 ID TC=100°C Maximum 30 A 18 IAS 32 A Avalanche energy L=0.05mH C EAS 26 mJ VDS Spike VSPIKE 36 V 100ns TC=25°C Power Dissipation B TC=100°C Power Dissipation A TA=70°C PD TA=25°C Rev 0: Nov. 2012 4.1 Steady-State Steady-State RθJA RθJC W 2.6 TJ, TSTG Symbol t ≤ 10s W 10 PDSM Junction and Storage Temperature Range Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case 25 -55 to 150 Typ 24 53 3.5 www.aosmd.com °C Max 30 64 5 Units °C/W °C/W °C/W Page 1 of 6 AON6552 Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter STATIC PARAMETERS Drain-Source Breakdown Voltage BVDSS IDSS Zero Gate Voltage Drain Current Conditions Min ID=250µA, VGS=0V Gate-Body leakage current VDS=0V, VGS= ±20V Gate Threshold Voltage VDS=VGS,ID=250µA RDS(ON) Static Drain-Source On-Resistance VGS=10V, ID=20A TJ=125°C VGS=4.5V, ID=20A gFS Forward Transconductance VDS=5V, ID=20A VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current DYNAMIC PARAMETERS Ciss Input Capacitance Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance VGS=0V, VDS=15V, f=1MHz VGS=0V, VDS=0V, f=1MHz SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qg(4.5V) Total Gate Charge Qgs Gate Source Charge Qgd VGS=10V, VDS=15V, ID=20A µA 5 1.4 0.7 Units V 1 TJ=55°C IGSS Max 30 VDS=30V, VGS=0V VGS(th) Coss Typ 1.8 100 nA 2.2 V 4.1 5 5.6 6.8 6.7 8.5 91 0.7 mΩ mΩ S 1 V 30 A 1037 pF 441 pF 61 pF 1.5 2.3 Ω 15.5 22 nC 6.8 10 nC 3.0 nC Gate Drain Charge 3.6 nC tD(on) Turn-On DelayTime 5.5 ns tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf Turn-Off Fall Time trr Body Diode Reverse Recovery Time Qrr 3.3 ns 18 ns 4.3 ns IF=20A, dI/dt=500A/µs 12.7 Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/µs 17.2 ns nC VGS=10V, VDS=15V, RL=0.75Ω, RGEN=3Ω A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The Power dissipation PDSM is based on R θJA ≤ 10s and the maximum allowed junction temperature of 150°C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Single pulse width limited by junction temperature TJ(MAX)=150°C. D. The RθJA is the sum of the thermal impedance from junction to case RθJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300µs pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating. G. The maximum current rating is package limited. H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25°C. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev 0: Nov. 2012 www.aosmd.com Page 2 of 6 AON6552 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 100 10V VDS=5V 4.5V 80 80 7V 5V 4V 60 ID(A) ID (A) 60 40 40 125°C 20 25°C 20 VGS=3.0V 0 0 0 1 2 3 4 0 5 10 2 3 4 5 6 Normalized On-Resistance 1.6 VGS=4.5V 8 RDS(ON) (mΩ Ω) 1 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Fig 1: On-Region Characteristics (Note E) 6 4 VGS=10V 2 VGS=10V ID=20A 1.4 1.2 VGS=4.5V ID=20A 1 0.8 0 0 5 0 10 15 20 25 30 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 25 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature (Note E) 15 1.0E+02 ID=20A 1.0E+01 40 1.0E+00 IS (A) RDS(ON) (mΩ Ω) 10 125°C 5 125°C 1.0E-01 1.0E-02 25°C 1.0E-03 25°C 1.0E-04 1.0E-05 0 2 4 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev 0: Nov. 2012 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 AON6552 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 1400 Ciss Capacitance (pF) VGS (Volts) 1200 VDS=15V ID=20A 8 6 4 1000 800 600 Coss 400 2 200 0 Crss 0 0 5 10 15 20 0 Qg (nC) Figure 7: Gate-Charge Characteristics 10 15 20 25 30 VDS (Volts) Figure 8: Capacitance Characteristics 200 1000.0 RDS(ON) 100µs 1ms 10ms DC 1.0 TJ(Max)=150°C TC=25°C 0.0 0.01 0.1 Power (W) 10µs 10.0 0.1 TJ(Max)=150°C TC=25°C 160 10µs 100.0 ID (Amps) 5 17 5 2 10 120 80 40 1 10 100 0 0.0001 VDS (Volts) 0.001 0.01 0.1 1 10 0 Pulse Width (s) 18 Figure 10: Single Pulse Power Rating Junction-to-Case (Note F) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) Zθ JC Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TC+PDM.ZθJC.RθJC 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 40 RθJC=5°C/W PD 0.1 Single Pulse Ton T 0.01 1E-05 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev 0: Nov. 2012 www.aosmd.com Page 4 of 6 AON6552 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 40 Current rating ID(A) Power Dissipation (W) 30 20 10 0 0 25 50 75 100 125 150 30 20 10 0 0 TCASE (°C) Figure 12: Power De-rating (Note F) 25 50 75 100 125 150 TCASE (°C) Figure 13: Current De-rating (Note F) TA=25°C Zθ JA Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TA+PDM.ZθJA.RθJA 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 40 RθJA=64°C/W 0.1 PD 0.01 Single Pulse Ton T 0.001 1E-05 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 15: Normalized Maximum Transient Thermal Impedance (Note H) Rev 0: Nov. 2012 www.aosmd.com Page 5 of 6 AON6552 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds 90% + Vdd DUT Vgs VDC - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 E AR = 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds Isd Vgs Ig Rev 0: Nov. 2012 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6