DG308A, DG309 Vishay Siliconix Quad Monolithic SPST CMOS Analog Switches DESCRIPTION FEATURES Featuring low on-resistance (60 ) and fast switching (130 ns), the DG308A is supplied in the “normally open” configuration while DG309 is supplied “normally closed”. Input thresholds are high voltage CMOS compatible. • ± 15 V analog input range Designed with the Vishay Siliconix PLUS-40 CMOS process to combine low power dissipation with a high breakdown voltage rating of 44 V, each switch conducts equally well in both directions when on, and blocks up to the supply voltage when off. An epitaxial layer prevents latch up. • CMOS logic compatible • Low on-resistance: 60 • Fast switching: 130 ns • Low power dissipation: 30 nW BENEFITS • Full rail-to-rail analog signal range • Low signal error The DG308B, DG309B upgrades are recommended for new designs. • Wide dynamic range • Single or dual supply capability • Static protected logic inputs • Space savings (TSSOP) APPLICATIONS • Portable and battery powered instrumentation • Communication systems • Computer peripherals • High-speed multiplexing FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG308A IN1 1 16 IN2 D1 2 15 D2 S1 3 14 S2 V– 4 13 V+ GND 5 12 NC S4 6 11 S3 D4 7 10 D3 IN4 8 9 IN3 For SPST Switches per Package TRUTH TABLE Logic 0 1 DG308A OFF ON DG309 ON OFF Logic “0” 3.5 V Logic “1” 11 V Top View * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 70046 S11-0303-Rev. G, 28-Feb-11 www.vishay.com 1 DG308A, DG309 Vishay Siliconix ORDERING INFORMATION Temp. Range Package 0 °C to 70 °C 16-Pin Plastic DIP 16-Pin Narrow SOIC - 40 °C to 85 °C 16-Pin TSSOP Part Number DG308ACJ DG308ACJ-E3 DG309CJ DG309CJ-E3 DG308ADY DG308ADY-E3 DG308ADY-T1 DG308ADY-T1-E3 DG309DY DG309DY-E3 DG309DY-T1 DG309DY-T1-E3 DG308ADQ DG308ADQ-E3 DG308ADQ-T1 DG308ADQ-T1-E3 DG309DQ DG309DQ-E3 DG309DQ-T1 DG309DQ-T1-E3 ABSOLUTE MAXIMUM RATINGS Parameter Limit Voltages Referenced V+ to VGND 25 (V-) - 2 to (V+) + 2 or 20 mA, whichever occurs first Digital Inputsa, VS, VD Current, Any Terminal Except S or D Continuous Current Storage Temperature Power Dissipation Unit 44 b V 30 S or D 20 (Pulsed at 1 ms, 10 % duty cycle max.) 70 (AK Suffix) - 65 to 150 (CJ, DY and DQ Suffix) - 65 to 125 16-Pin Plastic DIPc 470 16-Pin Narrow SOIC and TSSOPe 600 16-Pin CerDIPd 900 mA °C mW Notes: a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 12 mW/°C above 75 °C. d. Derate 6.5 mW/°C above 25 °C. e. Derate 7.6 mW/°C above 75 °C. www.vishay.com 2 Document Number: 70046 S11-0303-Rev. G, 28-Feb-11 DG308A, DG309 Vishay Siliconix SCHEMATIC DIAGRAM (Typical Channel) V+ S VLevel Shift/ Drive VIN V+ GND D V- Figure 1. SPECIFICATIONSa Parameter Symbol Test Conditions Unless Specified V+ = 15 V, V- = - 15 V VIN = 3.5 V or 11 Vf A Suffix - 55 °C to 125°C Temp.b Typ.c C, D Suffix Min.d Max.d Min.d - 15 15 100 150 1 100 1 100 1 100 - 15 Max.d Unit Analog Switch Analog Signal Rangee Drain-Source On-Resistance RDS(on) VD = ± 10 V, IS = 1 mA Source Off Leakage Current IS(off) VS = ± 14 V, VD = ± 14 V Drain Off Leakage Current ID(off) VD = ± 14 V, VS = ± 14 V Drain On Leakage Current ID(on) VD = VS = ± 14 V Full Room Full Room Full Room Full Room Full IINH VIN = 15 V Full 0.001 IINL VIN = 0 V Full - 0.001 Room 8 Room 130 200 200 Room 90 150 150 Room - 10 Room 11 Digital Control Input Current with Input Voltage High Input Current with Input Voltage Low Input Capacitance VANALOG CIN tON Turn-Off Time tOFF Q Source-Off Capacitance CS(off) Drain-Off Capacitance CD(off) Channel-On Capacitance CD(on) Off-Isolationf OIRR Document Number: 70046 S11-0303-Rev. G, 28-Feb-11 ± 0.1 ± 0.1 ± 0.1 -1 100 -1 100 -1 100 -5 - 100 -5 - 100 -5 - 200 1 15 100 125 5 100 5 100 5 200 V nA 1 µA Dynamic Characteristics Turn-On Time Charge Injection 60 see figure 2 CL = 0.01 µF, Rgen = 0 Vgen = 0 V, f = 140 kHz, VS, VD = 0 V RL = 75 , VS = 2 Vp-p, f = 500 kHz Room 8 Room 27 Room 78 -1 -1 pF ns pC pF dB www.vishay.com 3 DG308A, DG309 Vishay Siliconix SPECIFICATIONSa Parameter Power Supplies Symbol Positive Supply Current I+ Negative Supply Current I- Test Conditions Unless Specified V+ = 15 V, V- = - 15 V VIN = 3.5 V or 11 Vf A Suffix - 55 °C to 125°C all channels on or off VIN = 0 V or 15 V Temp.b Typ.c Room Full Room Full 0.001 Min.d C, D Suffix Max.d Min.d Max.d Unit 10 100 - 0.001 10 100 - 10 - 100 µA - 100 Notes: a.Refer to PROCESS OPTION FLOWCHART. b.Room = 25 °C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d.The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e.Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) ± 15 V Supplies TA = 25 °C ±5V 800 120 600 ± 7.5 V 90 I+, I- (µA) RDS(on) - Drain-Source On-Resistance () 1000 TA = 25 °C 150 ± 10 V 60 30 I200 ± 20 V 0 - 20 - 10 -5 5 0 10 VD - Drain Voltage (V) 15 20 1k 100 k 1M Supply Currents vs. Switching Frequency (All Inputs Active) 250 R DS(on) - Drain-Source On-Resistance () TA = 25 °C 10 IS(off) 0 ID(off) ID(on) - 20 - 30 - 15 - 12 - 9 - 6 - 3 0 3 6 9 12 VD or VS - Drain or Source Voltage (V) Leakage Currents vs. Analog Voltage www.vishay.com 4 10 k f - Frequency (Hz) 20 - 10 I+ 100 - 15 RDS(on) vs. VD and Power Supply I S, I D (pA) 400 ± 15 V 15 V+ = + 7.5 V TA = 25 °C V- = 0 V 200 150 + 10 V 100 + 15 V + 20 V 50 0 0 5 10 15 20 VD - Drain Voltage (V) RDS(on) vs. VD and Power Supply Voltage Document Number: 70046 S11-0303-Rev. G, 28-Feb-11 DG308A, DG309 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 10 8 TA = 25 °C V- = 0 V TA = 25 °C 7 8 6 5 V T (V) V T (V) 6 4 4 3 2 2 1 0 0 ±5 0 ± 10 ± 15 ± 20 0 V+, V- Positive and Negative Supplies (V) 5 10 15 V+ - Positive Supply Voltage (V) Input Switching Threshold vs. V+ and V- Supply Voltages Input Switching Threshold vs. Positive Supply Voltage + 15 V V+ VS = + 3 V D S VO Logic Input tr < 20 ns tf < 20 ns 12 V 50 % 0V tOFF IN 12 V GND V- RL 1 k CL 35 pF 90 % Switch Output - 15 V VO = V S VO tON RL RL + R DS(on) Figure 2. Switching Time APPLICATIONS Single Supply Operation The DG308A and DG309 will switch positive analog signals while using a single positive supply. This will allow use in many applications where only one supply is available. The trade-offs or performance given up while using single supplies are: 1) increased RDS(on) and 2) slower switching speed. As stated in the absolute maximum ratings section of the data sheet, the analog voltage should not go above or below the supply voltages which in single supply operation are V+ and 0 V. Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?70046. Document Number: 70046 S11-0303-Rev. G, 28-Feb-11 www.vishay.com 5 Package Information Vishay Siliconix SOIC (NARROW): 16ĆLEAD JEDEC Part Number: MS-012 MILLIMETERS 16 15 14 13 12 11 10 Dim A A1 B C D E e H L Ĭ 9 E 1 2 3 4 5 6 7 8 INCHES Min Max Min Max 1.35 1.75 0.053 0.069 0.10 0.20 0.004 0.008 0.38 0.51 0.015 0.020 0.18 0.23 0.007 0.009 9.80 10.00 0.385 0.393 3.80 4.00 0.149 0.157 1.27 BSC 0.050 BSC 5.80 6.20 0.228 0.244 0.50 0.93 0.020 0.037 0_ 8_ 0_ 8_ ECN: S-03946—Rev. F, 09-Jul-01 DWG: 5300 H D C All Leads e Document Number: 71194 02-Jul-01 B A1 L Ĭ 0.101 mm 0.004 IN www.vishay.com 1 Package Information Vishay Siliconix PDIP: 16ĆLEAD 16 15 14 13 12 11 10 9 E E1 1 2 3 4 5 6 7 8 D S Q1 A A1 L 15° MAX C B1 e1 Dim A A1 B B1 C D E E1 e1 eA L Q1 S B eA MILLIMETERS Min Max INCHES Min Max 3.81 5.08 0.150 0.200 0.38 1.27 0.015 0.050 0.38 0.51 0.015 0.020 0.89 1.65 0.035 0.065 0.20 0.30 0.008 0.012 18.93 21.33 0.745 0.840 7.62 8.26 0.300 0.325 5.59 7.11 0.220 0.280 2.29 2.79 0.090 0.110 7.37 7.87 0.290 0.310 2.79 3.81 0.110 0.150 1.27 2.03 0.050 0.080 0.38 1.52 .015 0.060 ECN: S-03946—Rev. D, 09-Jul-01 DWG: 5482 Document Number: 71261 06-Jul-01 www.vishay.com 1 Package Information Vishay Siliconix CERDIP: 16ĆLEAD 16 15 14 13 12 11 10 9 E1 E 1 2 3 4 5 6 7 8 D S Q1 A A1 L1 L e1 C B B1 MILLIMETERS Dim A A1 B B1 C D E E1 e1 eA L L1 Q1 S ∝ eA INCHES Min Max Min Max 4.06 5.08 0.160 0.200 0.51 1.14 0.020 0.045 0.38 0.51 0.015 0.020 1.14 1.65 0.045 0.065 0.20 0.30 0.008 0.012 19.05 19.56 0.750 0.770 7.62 8.26 0.300 0.325 6.60 7.62 0.260 0.300 2.54 BSC ∝ 0.100 BSC 7.62 BSC 0.300 BSC 3.18 3.81 0.125 0.150 3.81 5.08 0.150 0.200 1.27 2.16 0.050 0.085 0.38 1.14 0.015 0.045 0° 15° 0° 15° ECN: S-03946—Rev. G, 09-Jul-01 DWG: 5403 Document Number: 71282 03-Jul-01 www.vishay.com 1 Package Information Vishay Siliconix TSSOP: 16-LEAD DIMENSIONS IN MILLIMETERS Symbols Min Nom Max A - 1.10 1.20 A1 0.05 0.10 0.15 A2 - 1.00 1.05 0.38 B 0.22 0.28 C - 0.127 - D 4.90 5.00 5.10 E 6.10 6.40 6.70 E1 4.30 4.40 4.50 e - 0.65 - L 0.50 0.60 0.70 L1 0.90 1.00 1.10 y - - 0.10 θ1 0° 3° 6° ECN: S-61920-Rev. D, 23-Oct-06 DWG: 5624 Document Number: 74417 23-Oct-06 www.vishay.com 1 PAD Pattern www.vishay.com Vishay Siliconix RECOMMENDED MINIMUM PAD FOR TSSOP-16 0.193 (4.90) 0.171 0.014 0.026 0.012 (0.35) (0.65) (0.30) (4.35) (7.15) 0.281 0.055 (1.40) Recommended Minimum Pads Dimensions in inches (mm) Revision: 02-Sep-11 1 Document Number: 63550 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Application Note 826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR SO-16 RECOMMENDED MINIMUM PADS FOR SO-16 0.372 (9.449) 0.152 0.022 0.050 0.028 (0.559) (1.270) (0.711) (3.861) 0.246 (6.248) 0.047 (1.194) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index APPLICATION NOTE Return to Index www.vishay.com 24 Document Number: 72608 Revision: 21-Jan-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000