PESD1LIN LIN-bus ESD protection diode Rev. 3 — 31 May 2011 Product data sheet 1. Product profile 1.1 General description PESD1LIN in a very small SOD323 (SC-76) Surface-Mounted Device (SMD) plastic package designed to protect one automotive Local Interconnect Network (LIN) bus line from the damage caused by ElectroStatic Discharge (ESD) and other transients. 1.2 Features and benefits ESD protection of one automotive LIN-bus line Asymmetrical diode configuration ensures an optimized protection against ElectroMagnetic Interferences (EMI) of a LIN Electronic Control Unit (ECU) Max. peak pulse power: PPP = 160 W at tp = 8/20 s Low clamping voltage: VCL = 40 V at IPP = 1 A Ultra low leakage current: IRM < 1 nA ESD protection of up to 23 kV IEC 61000-4-2, level 4 (ESD) IEC 61000-4-5 (surge); IPP = 3 A at tp = 8/20 s AEC-Q101 qualified 1.3 Applications LIN-bus protection Automotive applications 1.4 Quick reference data Table 1. Quick reference data Tamb = 25 C unless otherwise specified. Symbol Parameter VRWM reverse standoff voltage Cd Min Typ Max Unit PESD1LIN (15 V) - - 15 V PESD1LIN (24 V) - - 24 V - 13 17 pF diode capacitance Conditions VR = 0 V; f = 1 MHz PESD1LIN NXP Semiconductors LIN-bus ESD protection diode 2. Pinning information Table 2. Pinning Pin Description Simplified outline 1 cathode 1 (15 V) 2 cathode 2 (24 V) 1 Graphic symbol 2 1 2 006aab041 3. Ordering information Table 3. Ordering information Type number PESD1LIN Package Name Description Version SC-76 plastic surface-mounted package; 2 leads SOD323 4. Marking Table 4. Marking codes Type number Marking code PESD1LIN AM 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit tp = 8/20 s [1] PPP peak pulse power IPP peak pulse current - 160 W tp = 8/20 s [1] - 3 A Tj junction temperature - 150 C Tamb ambient temperature 65 +150 C Tstg storage temperature 65 +150 C [1] PESD1LIN Product data sheet Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5. All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 2 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode Table 6. ESD maximum ratings Symbol Parameter Conditions electrostatic discharge voltage VESD IEC 61000-4-2 (contact discharge) MIL-STD-883 (human body model) [1] [1] Min Max Unit - 23 kV - 10 kV Device stressed with ten non-repetitive ESD pulses. Table 7. ESD standards compliance Standard Conditions IEC 61000-4-2; level 4 (ESD) > 15 kV (air); > 8 kV (contact) MIL-STD-883; class 3 (human body model) > 4 kV 001aaa631 IPP 001aaa630 120 100 % 90 % 100 % IPP; 8 μs IPP (%) 80 e−t 50 % IPP; 20 μs 40 10 % 0 10 20 30 30 ns 40 t (μs) Fig 1. t tr = 0.7 ns to 1 ns 0 8/20 s pulse waveform according to IEC 61000-4-5 PESD1LIN Product data sheet 60 ns Fig 2. ESD pulse waveform according to IEC 61000-4-2 All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 3 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode 6. Characteristics Table 8. Characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit VRWM reverse standoff voltage PESD1LIN (15 V) - - 15 V PESD1LIN (24 V) - - 24 V reverse leakage current IRM PESD1LIN (15 V) VRWM = 15 V - <1 50 nA PESD1LIN (24 V) VRWM = 24 V - <1 50 nA PESD1LIN (15 V) 17.1 18.9 20.3 V PESD1LIN (24 V) 25.4 27.8 30.3 V - 13 17 pF IPP = 1 A - - 25 V IPP = 5 A - - 44 V IPP = 1 A - - 40 V IPP = 3 A - - 70 V PESD1LIN (15 V) IR = 1 mA - - 225 PESD1LIN (24 V) IR = 1 mA - - 300 breakdown voltage VBR Cd diode capacitance VCL clamping voltage PESD1LIN (15 V) PESD1LIN (24 V) VR = 0 V; f = 1 MHz [1] differential resistance rdif [1] IR = 5 mA Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5. 006aaa164 104 001aaa193 1.2 PPP PPP (W) PPP(25°C) 103 0.8 102 0.4 10 1 10 102 103 0 104 0 t p (μs) 50 100 150 200 Tj (°C) Tamb = 25 C Fig 3. Peak pulse power as a function of exponential pulse duration; typical values PESD1LIN Product data sheet Fig 4. Relative variation of peak pulse power as a function of junction temperature; typical values All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 4 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode ESD TESTER RZ 450 Ω RG 223/U 50 Ω coax 4 GHz DIGITAL OSCILLOSCOPE 10× ATTENUATOR 50 Ω CZ D.U.T. (Device Under Test) IEC 61000-4-2 network CZ = 150 pF; RZ = 330 Ω vertical scale = 200 V/div horizontal scale = 50 ns/div vertical scale = 20 V/div horizontal scale = 50 ns/div PESD1LIN (24V) GND PESD1LIN (15V) GND GND unclamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) GND GND PESD1LIN (15V) GND PESD1LIN (24V) vertical scale = 200 V/div horizontal scale = 50 ns/div unclamped −1 kV ESD voltage waveform (IEC 61000-4-2 network) Fig 5. vertical scale = 20 V/div horizontal scale = 50 ns/div clamped −1 kV ESD voltage waveform (IEC 61000-4-2 network) 006aaa166 ESD clamping test setup and waveforms PESD1LIN Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 5 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode 7. Application information The PESD1LIN is designed for the protection of one LIN-bus signal line from the damage caused by ESD and surge pulses. The PESD1LIN provides a surge capability of up to 160 W per line for a 8/20 s waveform. power application (e.g. electro motor, inductive loads) application (e.g. voltage regulator and microcontroller) CBAT BAT LIN 2 LIN transceiver 24 V LIN node connector CMASTER/SLAVE 15 V GND 1 PESD1LIN 006aaa678 Fig 6. Typical application: ESD protection of one automotive LIN-bus line Circuit board layout and protection device placement Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended: 1. Place the PESD1LIN as close to the input terminal or connector as possible. 2. The path length between the PESD1LIN and the protected line should be minimized. 3. Keep parallel signal paths to a minimum. 4. Avoid running protection conductors in parallel with unprotected conductor. 5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops. 6. Minimize the length of the transient return path to ground. 7. Avoid using shared transient return paths to a common ground point. 8. Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 8. Test information 8.1 Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. PESD1LIN Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 6 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode 9. Package outline 1.35 1.15 1.1 0.8 0.45 0.15 1 2.7 2.3 1.8 1.6 2 0.40 0.25 Dimensions in mm Fig 7. 0.25 0.10 03-12-17 Package outline SOD323 (SC-76) 10. Packing information Table 9. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number PESD1LIN [1] PESD1LIN Product data sheet Package Description SOD323 4 mm pitch, 8 mm tape and reel Packing quantity 3000 10000 -115 -135 For further information and the availability of packing methods, see Section 14. All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 7 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode 11. Soldering 3.05 2.1 solder lands solder resist 0.5 (2×) 1.65 0.95 0.6 (2×) solder paste occupied area 2.2 Dimensions in mm 0.5 (2×) 0.6 (2×) Fig 8. sod323_fr Reflow soldering footprint SOD323 (SC-76) 5 2.9 1.5 (2×) solder lands solder resist occupied area 2.75 1.2 (2×) Dimensions in mm preferred transport direction during soldering sod323_fw Fig 9. PESD1LIN Product data sheet Wave soldering footprint SOD323 (SC-76) All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 8 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode 12. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes PESD1LIN v.3 20110531 Product data sheet - PESD1LIN v.2 Modifications: • • • • Section 1.2 “Features and benefits”: updated. Figure 6: updated. Section 8 “Test information”: added. Section 13 “Legal information”: updated. PESD1LIN v.2 20081112 Product data sheet - PESD1LIN v.1 PESD1LIN v.1 20041026 Product data sheet - - PESD1LIN Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 9 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 13.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 13.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. PESD1LIN Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 10 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 13.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] PESD1LIN Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 31 May 2011 © NXP B.V. 2011. All rights reserved. 11 of 12 PESD1LIN NXP Semiconductors LIN-bus ESD protection diode 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 8.1 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Application information. . . . . . . . . . . . . . . . . . . 6 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 6 Quality information . . . . . . . . . . . . . . . . . . . . . . 6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packing information . . . . . . . . . . . . . . . . . . . . . 7 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information. . . . . . . . . . . . . . . . . . . . . 11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2011. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 31 May 2011 Document identifier: PESD1LIN