10A05 THRU 10A10 GENERAL PURPOSE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts FEATURES CURRENT 10 Ampere R-6 Low forward voltage drop Low leakage current High forward surge capability High temperature soldering guaranteed 260℃/10 seconds,0.375”(9.5mm)lead length at 5 lbs(2.3kg) tension MECHANICAL DATA Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Polarity: Color band denotes cathode end Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified , Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% PARAMETER SYMBOL 10A05 10A1 10A2 10A4 10A6 10A8 10A10 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current at TA=75℃ I(AV) 10 Amps IFSM 400 Amps VF 1.1 Volts Peak Forward Surge Current 8.3mS single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current TA = 25℃ IR at rated DC Blocking Voltage 10 uA 100 TA = 125℃ Typical Junction Capacitance (NOTE 1) CJ 125 pF Typical Thermal Resistance (NOTE 2) RθJA 8 ℃/W TJ,TSTG -55 to +150 ℃ Operating and Storage Temperature Range 1.Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 10A05 THRU 10A10 RATINGS AND CHARACTERISTIC CURVES Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2