Suntan Su ® ® 10A05 THRU 10A10 GENERAL PURPOSE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 10 Ampere FEATU RE S R-6 ◆Low forward voltage drop ◆Low leakage current ◆High forward surge capability ◆High temperature soldering guaranteed ◆260℃/10 seconds,0.375”(9.5mm)lead length at 5 lbs(2.3kg) tension Mechanical Data ◆Case: Transfer molded plastic ◆Epoxy: UL94V-0 rate flame retardant ◆Polarity: Color band denotes cathode end ◆Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Dimensions in inches and (millimeters) ◆Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% PARAMETER SYMBOL 10A05 10A1 10A2 10A4 10A6 10A8 10A10 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current at TA=75℃ I(AV) 10 Amps IFSM 400 Amps VF 1.1 Volts Peak Forward Surge Current 8.3mS single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at rated DC Blocking Voltage 10 TA = 25℃ IR uA 100 TA = 125℃ Typical Junction Capacitance (NOTE 1) CJ 125 pF Typical Thermal Resistance (NOTE 2) RθJA 8 ℃/W TJ,TSTG -55 to +150 ℃ Operating and Storage Temperature Range Note: 1.Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 Suntan Su ® ® 10A05 THRU 10A10 GENERAL PURPOSE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 10 Ampere RATING AND CHARACTERISTIC CURVES 10A05 THRU 10A10 Note: Specifications are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246