P Ideas for Wireless Solutions Bluetooth low energy - Module PAN1720 OUTLINES M ODULES Panasonic Electronic Devices Europe GmbH IRELESS W This Bluetooth low energy single-mode module has been specially developed for applications which communicate with dual or single mode Bluetooth low energy devices like mobile phones, PDAs, Laptops etc. So it is very easy to expand you personal area network with this module, using existing gateways. The included Bluetooth low energy stack is currently supporting the proximity and battery profile. The user specific application can be written on top of the Bluetooth Stack. The communication between stack and application is handled via vendor specific HCI-Commands. The PAN1720-Module is manufactured in a very small 15.6 x 8.7 x 1.9 mm³ SMD package with shielded case and will be qualified, according to the Bluetooth 4.0 standard. FEATURES General - Complete Bluetooth low energy solution (Bluetooth 4.0) - Supported Profiles: Proximity and Battery profiles - Low power 8051 µC included - Up to 256k Flash and 8k RAM - Data rates up to 1 Mbps - IR Generation Circuitry - AES Security Coprocessor - Temperature Range from -40°C to +85°C - Supply Voltage Range from 2.0V to 3.6V, typ. 3.0V - Dimension only 15.6 x 8.7 x 1.9 mm³ - Dimension and Footprint compatible to PAN1320/21 Interfaces - Two powerful USARTs with support for several serial protocols - Full speed USB 2.0 interface - 19 general-purpose I/O pins (17x 4mA, 2x20 mA) - 12-Bit ADC with eight channels and configurable resolution Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1720 BT4.0 Rev. A2 Hardware Status: Engineering Samples P CONTACT Dipl.-Ing. Mathias Hopp Product Manager Wireless Connectivity Panasonic Electronic Devices Europe GmbH Zeppelinstrasse 19 21337 Lüneburg, Germany Tel. +49-4131-899-283 Fax +49-4131-899-187 [email protected] APPLICATIONS - 2.4 GHz Bluetooth low energy systems - Proprietary 2.4 GHz systems - Human Interface Devices - Sports and leisure equipment - Mobile phone accessories - Remote control for computers, MP3 players - Consumer Electronics - USB dongles - Health Care and Medical BLOCK DIAGRAM TECHNICAL CHARACTERISTICS Parameter Value Condition / Note Receiver Sensitivity (1% PER) Output Power Power Supply Sleep Mode Transmit Mode Receive Mode Operating Temperature Range -94 dBm +3 dBm typ. 2,0 - 3,6 V 0.5µA 28mA 18mA -40°C to +85°C @ 500 kpbs / MSK (high-gain mode) Maximum setting Single operation voltage Power mode 3 (lowest) @ 0dBm (peak current) Standard mode Industrial Range Hardware Status: Engineering Samples