2SC0650P SCALE™-2 IGBT Gate Driver Planar Core 2SC0650P – Dual-Channel IGBT Gate Driver Core with Planar Transformers. highest Power Density for high-Power and highFrequency. 50 A Gate Current and 2 x 6 W Output Power. PrODUCT DESCrIPTIOn The 2SC0650P driver core combines high power density with broad applicability. The driver is designed for both high-power and high-frequency applications requiring maximum reliability. It is suitable for IGBTs with reverse voltages up to 1700 v and also SiC MOSFET. The highly integrated SCALE™-2 chipset reduces the component count by up to 85 % compared to conventional solutions, thus significantly increasing reliability and reducing costs. SCALE™-2 technology enables the driver core to operate at switching frequencies of up to 150 khz – at best-in-class efficiency. The 2SC0650P has a profile of only 6.5 mm and a footprint of 57 x 62 mm. It combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, Advanced Active Clamping as well as supply voltage monitoring. Each of the two output channels is electrically-isolated from the primary side and the other secondary channel. Page 16 APPLICATIOnS - high gate-current driving applications high-frequency applications Switched-mode power supplies (SMPS) Wind power converters Induction heating Industrial drives Traction applications Electro/hybrid drive commercial vehicles KEy BEnEFITS Ultra-flat due to planar transformers and highest power density. Low transformer stray inductance. KEy FEATUrES - Ultra-low-profile solution Planar transformer isolation IGBT blocking voltages up to 1700 v Switching frequency up to 150 khz very short delay time of ≤80 ns Extremely small jitter of ≤±2 ns high gate current ±50 A Compatible to all logic families IGBT short-circuit protection Advanced Active Clamping 2 x 6 W output power Supply under-voltage lockout Safe isolation to En50178 UL compliant Superior EMC © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -50 0 5000 1768 Maximum switching frequency depends on the IGBT gate charge. See Data sheet for actual value of specific driver. Typical 15 61 +15/-10 80 75 15 15 Max 1335 6.5 +50 150 100 5100 100 +85 -40 Unit v mA mA W v A khz % ns ns mm mm vAC vpeak kv/us degC BASIC SChEMATIC OF ThE 2SC0650P OrDErInG InFOrMATIOn 2SC0650P DUAL-ChAnnEL SCALE™-2 GATE DrIvEr PLAnAr COrE 2SC0650P Type Designation 2SC0650P2A0-17 2SC0650P2C0-17 © 2015 | www.power.com/igbt-driver Description Switching frequency up to 150 khz Switching frequency up to 150 khz Temp degC -40…85 -40…85 Lead free no no Pin length 2.54 mm 5.84 mm Page 17