1SC2060P SCALE™-2 IGBT Gate Driver Planar Core 1SC2060P – Single-Channel Gate Driver Core with 60 A Gate Current for Driving Large IGBT Modules in Parallel 20 W Output Power for high-Frequency Applications up to 500 khz. PrODUCT DESCrIPTIOn The 1SC2060P is designed for high-power and high-frequency applications using highpower IGBTs and SiC MOSFETs. The gate driver supports switching at up to 500 khz with best-in-class efficiency. The 1SC2060P effectively comprises a complete single-channel IGBT driver core, fully-equipped with an isolated DC/DC converter, short-circuit protection, Advanced Active Clamping, and supply-voltage monitoring. With its compact outline of 44 mm x 74 mm and a total height of just 7 mm, the 1SC2060P delivers high power density in an attractive form factor. The highly-integrated SCALE™-2 chipset reduces components being cut by around 85 %. This leads to increased reliability and minimized costs. Page 18 APPLICATIOnS - high-frequency applications high gate-current driving applications Switched-mode power supplies (SMPS) Driving parallel-connected large IGBTs Wind power converters Traction propulsion converters Industrial drives Induction heating KEy BEnEFITS Use of planar transformer technology leads to low transformer stray inductance, ultra-flat design and high power density. KEy FEATUrES - Ultra-low-profile solution Planar transformer isolation Switching frequency up to 500 khz IGBT blocking voltages up to 1700 v very short delay time of <80 ns Extremely small jitter of <±1 ns high gate current ±60 A Compatible to all logic families IGBT short-circuit protection Advanced Active Clamping Isolated DC/DC converter 20 W output power Supply under-voltage lockout Safe isolation to En50178 UL compliant Superior EMC © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -60 0 15 15 5000 1768 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver Typical 15 48 +15/-10 75 70 15 5050 Max 2131 23 +60 500 100 5100 100 +85 -40 Unit v mA mA W v A khz % ns ns mm mm vAC vpeak kv/us degC BASIC SChEMATIC OF ThE 1SC2060P OrDErInG InFOrMATIOn 1SC2060P SInGLE-ChAnnEL SCALE™-2 GATE DrIvEr PLAnAr COrE 1SC02060P Type Designation 1SC02060P2A0-17 © 2015 | www.power.com/igbt-driver Description Switching frequency up to 500 khz Temp degC -40…85 Lead free no Pin length 5.84 mm Page 19