SEME-LAB IP3R19-12

IP1R19A
IP3R19A
IP1R19A
IP3R19A
SEME
LAB
1
5 AMP
FIXED NEGATIVE
VOLTAGE REGULATORS
2
3
Pin 1 – Ground
Pin 2 – VOUT
Case – VIN
K Package – TO–3
FEATURES
• 0.01%/V LINE REGULATION
• 0.5% LOAD REGULATION
• ±1% OUTPUT TOLERANCE
(–A VERSIONS)
• AVAILABLE IN –5V, –12V AND –15V OPTIONS
1
2
Pin 1
Pin 2
Pin 3
Case
–
–
–
–
3
• COMPLETE SERIES OF PROTECTIONS:
• CURRENT LIMITING
• THERMAL SHUTDOWN
• SOA CONTROL
Ground
VIN
VOUT
VIN
V Package – TO–218
Order Information
Part
Number
IP1R19Axx–zz
IP1R19xx–zz
IP3R19Azz–xx
IP3R19zz–xx
Note:
K–Pack
(TO–3)
✔
✔
✔
✔
xx = Voltage Code
(05, 12, 15)
eg.
IP1R19AK–05
V–Pack
(TO–218)
✔
✔
Temp.
Range
-55 to +150°C
”
0 to +125°C
”
zz = Package Code
(K, V)
IP3R19V–12
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
VI
DC Input Voltage
35V
PD
Power Dissipation
Internally limited
TJ
Operating Junction Temperature Range
See Table Above
TSTG
Storage Temperature Range
–65°C to +150°C
TL
Lead Temperature (Soldering, 10 sec)
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
300°C
Prelim. 4/96
IP1R19A
IP3R19A
IP1R19A
IP3R19A
SEME
LAB
ELECTRICAL CHARACTERISTICS
Parameter
VO
Test Conditions
Output Voltage
(TC = 25°C unless otherwise stated)
2
IP1R19A–05
IP3R19A–05
Min. Typ. Max.
IP1R19–05
IP3R19–05
Min. Typ. Max. Units
-5.05
-4.95
-5.15
-4.85
-5.25
-5
-5
-4.85
V
-4.75
V
IO = -5mA to -5A
P ≤ 50W
VIN = -8V to -20V
-5.15
TJ = Over Temp. Range 1
∆VO
∆VI
∆VO
∆IO
IQ
Line Regulation
Load Regulation
Quiescent Current
VIN = -7.5V to -35V
IO = -5mA
3
TJ = Over Temp. Range 1
IO = -5mA to -5A
3
TJ = Over Temp. Range 1
IO = -5mA
3
15
6
30
6
30
12
60
5
25
10
50
10
50
20
100
TJ = Over Temp. Range 1
IO = -5mA to -5A
∆IQ
Quiescent Current
TJ = Over Temp. Range 1
Change
IO = -5mA
Dropout Voltage
Ripple Rejection
Thermal Regulation
IPEAK Peak Output Current
∆VOUT = 100mV
f = 120Hz
2.2
60
TJ = Over Temp. Range 1
tp = 20ms
∆P = 50W
VIN = -10V
TJ = Over Temp. Range 1
10
5
TJ = Over Temp. Range 1
IO = -1A
10
80
0.002
-12
3
2.2
60
0.01
-8
0.02
%/W
A
-8
-7
VIN = -35V
-2
-2
Output Noise Voltage f = 10Hz to 100kHz
40
40
Thermal Resistance
K Package
1.0
1.5
1.0
1.5
Junction to Case
V Package
1.0
1.5
1.0
1.5
en
V
dB
80
0.002
-12
3
-7
Short Circuit Current
mA
5
VIN = -10V
ISC
RθJC
IO = -5A
5
mV
mA
VIN = -7.5V to -35V
TJ = Over Temp. Range 1
VD
5
mV
A
µV
°C/W
Notes
1) Applies over full temperature range:–
TJ = –55 to +150°C for IP1R19A–05 / IP1R19–05
TJ =
0 to +125°C for IP3R19A–05 / IP3R19–05
All other specifications apply at TC = 25°C unless otherwise stated.
2) Test conditions unless otherwise stated:–
VIN = -10V , IOUT = -2.5A .
Although Power Dissipation is internally limited, these specifications apply for Power Dissipation up to 50W.
3) Load and Line regulation are electrically independent and are measured using pulse techniques at low duty cycle in order to
maintain constant junction temperature. To determine the effects on the output voltage due to device heating, refer to thermal
regulation specification.
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 4/96
IP1R19A
IP3R19A
IP1R19A
IP3R19A
SEME
LAB
ELECTRICAL CHARACTERISTICS
Parameter
Test Conditions
(TJ = 25°C unless otherwise stated)
IP1R19A–12
IP3R19A–12
Min. Typ. Max.
2
-12.12
VO
Output Voltage
-12
IP1R19–12
IP3R19–12
Min. Typ. Max. Units
-11.88 -12.36
-12
-11.64
V
-11.40
V
IO = -5mA to -5A
P ≤ 50W
VIN = -15V to -27V
-12.36
-11.64 -12.60
TJ = Over Temp. Range 1
∆VO
∆VI
∆VO
∆IO
IQ
Line Regulation
Load Regulation
Quiescent Current
VIN = -14.5V to -35V
IO = -5mA
3
TJ = Over Temp. Range 1
IO = -5mA to -5A
3
TJ = Over Temp. Range 1
IO = -5mA
5
30
10
60
10
60
20
120
10
60
20
120
20
120
40
240
TJ = Over Temp. Range 1
IO = -5mA to -5A
∆IQ
Quiescent Current
TJ = Over Temp. Range 1
Change
IO = -5mA
Dropout Voltage
Ripple Rejection
Thermal Regulation
IPEAK Peak Output Current
∆VOUT = 250mV
f = 120Hz
2.2
52
TJ = Over Temp. Range 1
tp = 20ms
∆P = 50W
VIN = -17V
TJ = Over Temp. Range 1
10
5
TJ = Over Temp. Range 1
IO = -1A
10
72
0.002
-12
3
2.2
52
0.01
-8
0.02
%/W
A
-8
-4
VIN = -35V
-2
-2
Output Noise Voltage f = 10Hz to 100kHz
75
75
Thermal Resistance
K Package
1.0
1.5
1.0
1.5
Junction to Case
V Package
1.0
1.5
1.0
1.5
en
V
dB
72
0.002
-12
3
-4
Short Circuit Current
mA
5
VIN = -17V
ISC
RθJC
IO = -5A
5
mV
mA
VIN = -14.5V to -35V
TJ = Over Temp. Range 1
VD
5
mV
A
µV
°C/W
Notes
1) Applies over full temperature range:–
TJ = –55 to +150°C for IP1R19A–12 / IP1R19–12
TJ =
0 to +125°C for IP3R19A–12 / IP3R19–12
All other specifications apply at TC = 25°C unless otherwise stated.
2) Test conditions unless otherwise stated:–
VIN = -17V , IOUT = -2.5A .
Although Power Dissipation is internally limited, these specifications apply for Power Dissipation up to 50W.
3) Load and Line regulation are electrically independent and are measured using pulse techniques at low duty cycle in order to
maintain constant junction temperature. To determine the effects on the output voltage due to device heating, refer to thermal
regulation specification.
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 4/96
IP1R19A
IP3R19A
IP1R19A
IP3R19A
SEME
LAB
ELECTRICAL CHARACTERISTICS
Parameter
Test Conditions
(TJ = 25°C unless otherwise stated)
IP1R19A–15
IP3R19A–15
Min. Typ. Max.
2
-15.15
VO
Output Voltage
-15
IP1R19–15
IP3R19–15
Min. Typ. Max. Units
-14.85 -15.45
-15
-14.55
V
-14.25
V
IO = -5mA to -5A
POUT ≤ 50W
VIN = -18V to -30V
-15.45
-14.55 -15.75
TJ = Over Temp. Range 1
∆VO
∆VI
∆VO
∆IO
IQ
Line Regulation
Load Regulation
Quiescent Current
VIN = -17.5V to -35V
IO = -5mA
3
TJ = Over Temp. Range 1
IO = -5mA to -5A
3
TJ = Over Temp. Range 1
IO = -5mA
8
40
16
80
16
80
32
160
16
80
32
160
32
160
64
320
TJ = Over Temp. Range 1
IO = -5mA to -5A
∆IQ
Quiescent Current
TJ = Over Temp. Range 1
Change
IO = -5mA
Dropout Voltage
Ripple Rejection
Thermal Regulation
IPEAK Peak Output Current
∆VOUT = 300mV
f = 120Hz
2.2
50
TJ = Over Temp. Range 1
tp = 20ms
∆P = 50W
VIN = -20V
TJ = Over Temp. Range 1
10
5
TJ = Over Temp. Range 1
IO = -1A
10
70
0.002
-12
3
2.2
50
0.01
-8
0.02
%/W
A
-8
-3.5
VIN = -35V
-2
-2
Output Noise Voltage f = 10Hz to 10kHz
90
90
Thermal Resistance
K Package
1.0
1.5
1.0
1.5
Junction to Case
V Package
1.0
1.5
1.0
1.5
en
V
dB
70
0.002
-12
3
-3.5
Short Circuit Current
mA
5
VIN = -20V
ISC
RθJC
IO = -5A
5
mV
mA
VIN = -17.5V to -35V
TJ = Over Temp. Range 1
VD
5
mV
A
µV
°C/W
Notes
1) Applies over full temperature range:–
TJ = –55 to +150°C for IP1R19A–15 / IP1R19–15
TJ =
0 to +125°C for IP3R19A–15 / IP3R19–15
All other specifications apply at TC = 25°C unless otherwise stated.
2) Test conditions unless otherwise stated:–
VIN = -20V , IOUT = -2.5A .
Although Power Dissipation is internally limited, these specifications apply for Power Dissipation up to 50W.
3) Load and Line regulation are electrically independent and are measured using pulse techniques at low duty cycle in order to
maintain constant junction temperature. To determine the effects on the output voltage due to device heating, refer to thermal
regulation specification.
Semelab plc.
Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 4/96