SEME 2N1618 LAB MECHANICAL DATA Dimensions in mm (inches) NPN SILICON TRANSISTOR 1 0 .1 6 (0 .4 0 0 ) 1 7 .2 7 (0 .6 8 0 ) 1 9 .0 5 (0 .7 5 0 ) m in . ! • Bipolar Power Transistor 1 5 .4 2 (0 .6 0 7 ) m a x . • TO–61 Hermetic Package 7 .6 2 (0 .3 0 0 ) 8 .8 9 (0 .3 5 0 ) • High Current Switching 1 1 .1 7 6 (0 .4 4 0 ) 2 .7 9 4 (0 .1 1 0 ) • LF Large Signal Amplification 2 .2 8 6 (1 /4 ) U N F 2 A TO–61 Metal Package. Pin 1 – Emitter Pin 2 – Base Case – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO Collector – Base Voltage 100V VCEO Collector – Emitter Voltage 80V VEBO Emitter – Base Voltage 8V IC Continuous Collector Current 5A PD Total Device Dissipation Derate above 100°C TSTG , TJ Storage and Operating Junction Temperature Range 85W 570 mW/°C –65 to +175°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5641 Issue 1 SEME 2N1618 LAB Parameter Test Conditions Min. Typ. Max. Units ICBO Collector-Base cut-off current Tcase = 150°C VCB = 100V IE = 0 10 ICEX Collector-Emitter cut-off current VCB = 100V VBE = -1V 1 IEBO Emitter-Base cut-off current VEB = 8V IC = 0 1 V(BR)CEO* Collector-Emitter Breakdown Voltage IC = 100mA IB = 0 80 V(BR)EBO* Emitter-Base Breakdown Voltage IB = 1mA IC = 0 8 V(BR)CBO* Collector-Base Breakdown Voltage IC = 1mA IE = 0 100 h21E Static Forward Current Transfer Ratio VCE = 12V IC = 2A 15 VCEsat Collector-Emitter Saturation Voltage IC = 2A IB = 250mA 2 VBE Base-Emitter Voltage VCE = 12V IC = 2A 3 fT Transition Frequency (f=1MHz) VCE = 30V IC = 300mA Rth(J-C) Thermal Resistance (junction to case) mA V 75 3 V MHz 1.75 °C/W * Pulse test tp = 300µs , δ ≤ 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5641 Issue 1