QuickNet QSFP Harness Cable Assemblies: FBSP77-WW-ENG

QuickNet™ QSFP Harness Cable Assemblies
S P E C I F I C AT I O N S H E E T
technical information
To meet the needs for fiber cable plant migration from 10 to 40 GbE, Panduit offers QSFP+ to Four
SFP+ Fiber Harness Breakout Cable Assemblies. As part of the Panduit High Speed Data Transport
(HSDT) solution, these passive fiber cables provide a cost-effective solution for interconnecting high
speed 40 GbE switches equipped with QSFP+ modular transceivers to existing 10 GbE switches
equipped with SFP+ modulars.
The MPO end is wired as four separate 10 Gb/s transmit and receive fibers per the QSFP+ MSA,
which are connected to four 10 Gb/s LC connector ends. The four 10 Gb/s LC connector ends can
be directly attached to co-located switch gear or connected to an existing LC-based structured cabling
system to allow for distribution to different locations in the data center.
application
Interconnection of QSFP+ modular transceiver ports in 40 GE switches with multiple SFP+ modular ports in 10 GE switches.
construction
physical properties
Cable type:
Indoor flat ribbon
Cable outside diameter (OD):
2.5 x 5mm
Cable
jacket ratings:
Plenum OFNP
Low Smoke Zero Halogen (LSZH)
Minimum bend radius:
20 x Cable OD (installation)
Cable tensile strength:
660N
Fiber types:
Multimode:
Cable compressive load:
35N/cm
Cable flex:
25 cycles
Cable twist:
10 cycles
Connector cable retention:
50N
Connector
durability-singlemode:
MPO – 500 mating cycles
Breakout outside diameter:
13.0mm
Bend radius installation:
Installation: 76.2mm
Long term: 38.1mm
Cable tensile strength:
Installation: 440N
Long term: 18N
Connector
types, end ‘A’:
MPO female
MPO male
Fiber count:
8
Jacket color:
OM3:
OM4:
Connector
types, end ‘B’:
OM3 50/125µm
OM4 50/125µm
Aqua
Aqua
LC duplex
optical properties
environmental properties
Maximum cable
attenuation:
Operating temperature:
OM3 3.5dB/km at 850nm, 1.5dB/km
at 1300nm
OM4 3.5dB/km at 850nm, 1.5dB/km
at 1300nm
Maximum
connector
insertion loss:
Per mated pair: 0.50dB typical,
0.75dB max.
Minimum
connector
return loss:
Multimode:
OM3 26dB minimum
OM4 26dB minimum
Storage and
shipping temperature:
Installation temperature:
-40°C to 65°C
0°C to 50°C
standards
Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3,
TIA-604-5 (FOCIS-5), TIA/EIA-568-C.1
RoHS Compliant
w w w. pa n d u it.c o m
0°C to 50°C
QuickNet™ QSFP Harness Cable Assemblies
part number
Example: FZ8HP5NLSQNM001 = Fiber OM4, 8 fiber, flat ribbon, plenum rated, MPO female to LC duplex QSFP to SFP breakout with 61cm equal
breakout, standard IL, no pulling eye, 1m
CHARACTER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
EXAMPLE
F
Z
8
H
P
5
N
L
S
Q
N
M
0
0
1
1 – Fiber Product
F = Fiber
2 – Fiber Type
X = OM3 50/125µm
Z = OM4 50/125µm
3 – Fiber Count
8 = 8-fibers
4 – Cable Type
H = Flat ribbon
5 – Jacket Type
L = Low Smoke Zero
Halogen (LSZH)
P = Optical Fiber Non-conductive
Plenum (OFNP)
6 – Connector Type End A
5 = MPO female
6 = MPO male
7 – Connector Variant
N = No variant
8 – Connector Type End B
L = LC duplex
9 – Connector Variant
D = 1m equal breakout
S = 61cm equal breakout
10 – Construction/Performance
Q = Std performance/std polarity
MPO to discrete, QSFP to
SFP breakout wiring
11 – Other
N = No variant
12 – Unit of Length
F = Feet
M = Meters
13, 14, 15 – Length
1 – 5m
3 – 15 feet
Other options are available as follows:
Fiber Type: OM1 62.5/125, OM2 50/125, OM4+ 50/125 Sig Core
Connector Variant: 46cm (18") equal breakout, 76cm (30") equal breakout, 91cm (36") equal breakout
harness assembly detail
Overall Length as Measured Between Ferrule End Faces
Single-Fiber Connector
Fiber 1
Fiber 12
Jacketed Ribbon Cable
Fiber 2
Fiber 11
Fiber 12
Fiber 1
Fiber 3
Fiber 10
Fiber 4
Fiber 9
Female MPO Connector
with Dust Cap Removed
61cm (24")
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
©2013 Panduit Corp.
ALL RIGHTS RESERVED.
FBSP77--WW-ENG
8/2013