NEC EXPRESS5800/GT110d Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC EXPRESS5800 server. January 2012 Revision 2.1 NEC Corporation CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d Contents TECHNICAL SPECIFICATION ........................................................................................ 3 Key Features .......................................................................................................................................... 3 Specification .......................................................................................................................................... 3 EXTERNAL VIEWS ......................................................................................................... 5 Front and Rear Views ........................................................................................................................... 5 Dimensions (mm) .................................................................................................................................. 6 CONFIGURATION DIAGRAM ......................................................................................... 7 SERVER CONFIGURATION ........................................................................................... 8 1 2 3 4 Base Models ................................................................................................................................... 8 Processor ....................................................................................................................................... 8 Memory ........................................................................................................................................... 8 Internal Hard Disk Drives .............................................................................................................. 9 4.1 RAID Configuration ............................................................................................................... 9 4.2 Internal Drive Configuration ................................................................................................ 10 5 Internal Optical Drive ................................................................................................................... 16 6 Internal Tape / RDX Drives .......................................................................................................... 17 6.1 Tape / RDX Drive Selection ................................................................................................ 17 6.2 Tape / RDX Configuration ................................................................................................... 18 7 Internal Flash Memory ................................................................................................................. 19 8 PCI Card ........................................................................................................................................ 19 8.1 LAN / SCSI /SAS Controller ................................................................................................ 20 8.2 Serial Port Adapter .............................................................................................................. 20 9 Other Add-in Components .......................................................................................................... 20 9.1 Input Devices ...................................................................................................................... 20 10 Add-on Components ................................................................................................................... 20 10.1 Server Management License .............................................................................................. 21 10.2 Rack Conversion Kit ........................................................................................................... 21 10.3 Flash FDD ........................................................................................................................... 21 10.4 Medium and Cartridge ........................................................................................................ 22 REFERENCES............................................................................................................... 23 Note for Ordering ................................................................................................................................ 23 Server Management ............................................................................................................................ 23 OS Support Matrix for PCI Cards ...................................................................................................... 24 Supporting PCI Cards and Installable Slots ..................................................................................... 24 Copyright Notice and Liability Disclaimer ........................................................................................ 25 REVISION HISTORY ..................................................................................................... 26 NEC Corporation Revision 2.1, January 2012 2 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d Technical Specification Key Features 26 liter compact chassis High performance with the latest Intel® Xeon® processor E3-1200 series Up to 32 GB of high speed DDR3-1333 memory Full manageability by integrated EXPRESSSCOPE Engine 3 Whisper quiet 35dB operation at maximum configuration Specification Model GT110d Part Number Processor N8100-1738F Type Intel® Pentium® processor G630 Intel® Xeon® processor E3-1220 Clock Speed 2.70 GHz 3.10 GHz Number of Processors 1 Cache 3 MB 8 MB Cores and Threads 2C / 2T 4C / 4T Chipset Memory Internal Storage Intel® C204 Chipset Type DDR3-1333 ECC Unbuffered DIMM Standard Capacity 0 MB Maximum Capacity 32 MB (4 x 8 GB) Standard Capacity 0 GB Maximum Capacity 3.5-inch SATA : 12 TB (4 x 3 TB) 1 2.5-inch SAS : 1.2 TB (4 x 300 GB) 1 2.5-inch SATA : 4 TB (4 x 1 TB) 1 2.5-inch SSD : 400 GB (4 x 100 GB) Disk Controller SATA : 3Gb/s (Integrated) SAS: 6Gb/s (Optional) RAID SATA : RAID 0/1/10 (Standard), RAID 5/6 (Optional) SAS : RAID 0/1/5/6/10 (Optional) Hot Plug - Optical Disk Drive Slim DVD-ROM 5-inch Media Bays [free] Disk Drive Bays [free] 2 [2] 2 3 1 2.5-inch : 4 [4] 3.5-inch: 4 [4] Expansion Slots [free] Total: 4 slots available 1 [1] x PCIe 2.0 x16 (x16 connector) 2 [2] x PCIe 2.0 x4 (x8 connector) 1 [1] x 32-bit/33 MHz PCI Video Controller (VRAM) Integrated in Server Management Controller (32MB) Interfaces 1 x VGA (15-pin mini D-sub,1x rear) 1 x Serial (9-pin mini D-sub, RS232-C, Serial A, 1 x rear) 8x USB2.0 (2 x front, 4 x rear, 2 x internal) 2x 1000BASE-T LAN connector (1000BASE-T / 100BASE-TX / 10BASE-T, RJ-45, 2 x rear) 1 x Management LAN connector (100BASE-TX / 10BASE-T, RJ-45, 1 x rear) NEC Corporation Revision 2.1, January 2012 3 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d Model GT110d Server Management EXPRESSSCOPE Engine 3 System fan Standard Power Supply 1 x 400 Watt 80 PLUS® Gold certified non-Hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz Power Consumption (100VAC, Max. config, Idling) (100VAC, Max. config, Operating) Minimum Config. 114 VA / 112 Watt 132 VA / 129 Watt 174 VA / 170 Watt 239 VA / 237 Watt Acoustical Noise (Sound Pressure Maximum Config. 4 Level) Dimensions (W x D x H ) 27.9 dB 27.2 dB 36.8 dB 36.7 dB Weight (Minimum / Maximum) 14 kg / 17.5 kg, 30.84 lbs. / 38.58 lbs. Temperature, Relative Humidity (non-condensing) Operating: 10° to 40° C / 50° to 104° F, 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% Regulatory and Safety FCC, CE, BSMI, CCC, UL, CB, RoHS, WEEE Operating Systems Microsoft® Windows Server® 2003 R2, Standard Edition SP2 or later Microsoft® Windows Server® 2003 R2, Standard x64 Edition SP2 or later Microsoft® Windows Server® 2008 Standard Microsoft® Windows Server® 2008 Standard (x64) Microsoft® Windows Server® 2008 Enterprise Microsoft® Windows Server® 2008 Enterprise (x64) Microsoft Windows Server 2008 R2 Standard Microsoft Windows Server 2008 R2 Enterprise 4 Red Hat Enterprise Linux 5.6 or later 4 Red Hat Enterprise Linux 5.6 or later (EM64T) 4 Red Hat Enterprise Linux 6.1 or later 4 Red Hat Enterprise Linux 6.1 or later (EM64T) VMware ESXi™ 5.0 1 2 3 4 5 175 x 418 x 364 mm / 6.9 x 16.5 x 14.3 in (4U) To install a 2.5-inch hard drive and a SSD, an optional 2.5-inch HDD cage is required. On-board SATA RAID controller is supported only on Windows operating systems. On-board SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: http://www.nec.com/global/prod/express/linux/index.html NEC Corporation Revision 2.1, January 2012 4 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d External Views Front and Rear Views H I A P J K B L C D E M F N G O Front view Rear view Legend A. 5-inch Media Bay H. Serial Port Connector B. Optical Disk Drive I. VGA Connector C. Power Button J. BMC Reset Switch D. Power LED K. Dump (NMI) Switch E. Hard Drive Activity LED L. USB Connectors F. System Status LED M. Management LAN Connector G. USB Connectors N. Data LAN Connectors O. PCI Slots P. AC Inlet NEC Corporation Revision 2.1, January 2012 5 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d Dimensions (mm) NEC Corporation Revision 2.1, January 2012 6 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d Configuration Diagram CHASSIS REAR Media Bay #1 Fixed Power Supply CHASSIS FRONT Media Bay #2 DIMM #1 DIMM #2 DIMM #3 DIMM #4 Media Bay #3 DVD-ROM 3.5-inch HDD Cage Fixed HDD Bay #4 Processor Socket #1 Fixed HDD Bay #3 Fixed HDD Bay #2 PCIe 2.0 x4 (x8 socket) FH/HL PCIe 2.0 x4 (x8 socket) FH/HL Fixed HDD Bay #1 PCIe 2.0 x16 (x16 socket) FH/HL PCI 32-bit/33MHz FH/FL Legend: NEC Corporation BBU slot #1 Minimum requirement components Revision 2.1, January 2012 Standard components 7 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d Server Configuration 1 Base Models Product Name / Description Part Number NEC EXPRESS5800/GT110d Server no processor, no RAM, no HDD Including: 1x Slim DVD-ROM drive, 3.5-inch HDD Cage, EXPRESSBUILDER DVD N8100-1738F NOTE: The base model must be ordered with a processor kit. 2 Processor Available sockets: 1 Product Name / Description Part Number Processor Kit (2C/G630) Intel® Pentium® Processor G630 (2.70GHz / 2C-2T / 3MB), including heat sink Processor Kit (4C/E3-1220) Intel® Xeon® Processor E3-1220 (3.10 GHz / 4C-4T / 8 MB) , including heat sink N8101-527F N8101-500F NOTE: One processor kit from above must be installed. The processor kit must be ordered with the base model. 3 Memory Available slots: 4 Product Name / Description Part Number 1GB Memory Kit 1GB (1x 1 GB) DDR3-1333 ECC Unbuffered DIMM 2GB Memory Kit 2GB (1x 2 GB) DDR3-1333 ECC Unbuffered DIMM 4GB Memory Kit 4GB (1x 4 GB) DDR3-1333 ECC Unbuffered DIMM 8GB Memory Kit 8GB (1x 8 GB) DDR3-1333 ECC Unbuffered DIMM N8102-415F N8102-416F N8102-417F N8102-418F NOTE: Minimum one memory kit must be installed. It is recommended to install two identical memory kits for dual-channel symmetric configuration to increase memory transfer speed. Actual DIMM speed sets to 1066 MHz when you choose Pentium Processor. NEC Corporation Revision 2.1, January 2012 8 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d Maximum Available Memory See the table below for the maximum memory size that you can actually use on your system. The maximum available memory is less than the maximum physical memory supported by your system because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary depending on the type and the number of PCI cards you are using. Maximum memory size supported by OS Maximum available memory 4 GB Microsoft Windows Server 2003 R2, Standard Edition Microsoft Windows Server 2008 Standard 4 GB( HW-DEP enabled) App. 3.3 GB (HW-DEP disabled) 32 GB Microsoft Windows Server 2003 R2, Standard x64 Edition Microsoft Windows Server 2008 Standard (x64) Microsoft Windows Server 2008 R2 Standard (x64) 32 GB 64 GB Microsoft Windows Server 2003 R2, Enterprise Edition Microsoft Windows Server 2008 Enterprise 32 GB 1 TB Microsoft Windows Server 2003 R2, Enterprise x64 Edition 32 GB 2 TB Microsoft Windows Server 2008 Enterprise (x64) Microsoft Windows Server 2008 R2 Enterprise (x64) 32 GB 16 GB Red Hat Enterprise Linux 5 Red Hat Enterprise Linux 6 16 GB 256 GB Red Hat Enterprise Linux 5 (EM64T) 32 GB 2 TB Red Hat Enterprise Linux 6 (EM64T) 32 GB 4 Internal Hard Disk Drives 4.1 RAID Configuration Refer to the section in accordance with your disk form factor and RAID configuration. 4.1.1 3.5-inch Drive Available Disk Refer to 4.2.1 SATA 128MB Cache Refer to 4.2.2 SATA 256MB Cache Refer to 4.2.3 SATA 256MB Cache Refer to 4.2.4 SATA 512MB Cache Refer to 4.2.5 SATA Non-RAID On-board SATA RAID Controller RAID 0/1/10 Optional RAID Controller RAID 5/6 NOTE: On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID controller is required to configure RAID array for other operating systems. On-board SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs. All hard drives within a RAID array should be of the same capacity. An optional RAID controller occupies one PCI slot. NEC Corporation Revision 2.1, January 2012 9 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 4.1.2 2.5-inch Drive Available Disk Refer to 4.2.6 SATA, SSD 128MB Cache Refer to 4.2.7 SAS, SATA, SSD 256MB Cache Refer to 4.2.8 SAS, SATA, SSD 256MB Cache Refer to 4.2.9 SAS, SATA, SSD 512MB Cache Refer to 4.2.10 SAS, SATA, SSD Non-RAID On-board SATA RAID RAID 0/1/10 Optional RAID Controller RAID 5/6 NOTE: On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID controller is required to configure RAID array for other operating systems. Mixing SAS and SATA hard drives in the same system is not supported. Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller. An optional RAID controller occupies one PCI slot. 4.2 Internal Drive Configuration 4.2.1 3.5-inch Drive with On-board SATA Controller Category Product Name / Description Part Number Storage Controller On-board SATA Controller 4 x SATA ports, RAID 0/1/10 capable Internal SATA Cable 1x SATA to 1x SATA, 4 sets 3.5-inch HDD cage 4 x 3.5-inch non hot plug (fixed) hard drive bays 160GB HDD 1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm 3TB HDD 1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm (Standard) Cable HDD Cage HDD 4 slots available (Standard) (Standard) N8150-372 N8150-373 N8150-343 N8150-260 N8150-284 N8150-339 NOTE: On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID controller is required to configure RAID array for other operating systems. On-board SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs. 3 TB HDDs are not supported with the on-board SATA non-RAID controller. All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 2.1, January 2012 10 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 4.2.2 3.5-inch Drive with RAID 0/1 Controller with 128 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (128MB, RAID 0/1) Promise SuperTrak TX8760T-128 RAID 0/1/10, 128MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T Internal SAS/SATA Cable 1x mini-SAS to 4x fixed SAS 3.5-inch HDD cage 4 x 3.5-inch non hot plug (fixed) hard drive bays 160GB HDD 1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm 3TB HDD 1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm N8103-128 RAID BBU Recommended Cable Required HDD Cage HDD 4 slots available N8103-141 K410-252(00) (Standard) N8150-372 N8150-373 N8150-343 N8150-260 N8150-284 N8150-339 NOTE: All hard drives within a RAID array should be of the same capacity. 4.2.3 3.5-inch Drive with RAID 0/1 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1x mini-SAS to 4x fixed SAS 3.5-inch HDD cage 4 x 3.5-inch non hot plug (fixed) hard drive bays 160GB HDD 1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm N8103-129 RAID BBU Recommended Cable Required HDD Cage HDD 4 slots available N8103-121 K410-252(00) (Standard) N8150-372 N8150-373 N8150-343 N8150-260 N8150-284 NOTE: All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 2.1, January 2012 11 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 4.2.4 3.5-inch Drive with RAID 5/6 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1/5/6) LSI MegaRAID SAS 9264-8i RAID 0/1/5/6/10/50, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1x mini-SAS to 4x fixed SAS 3.5-inch HDD cage 4 x 3.5-inch non hot plug (fixed) hard drive bays 160GB HDD 1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm N8103-130 RAID BBU Recommended Cable Required HDD Cage HDD 4 slots available N8103-121 K410-252(00) (Standard) N8150-372 N8150-373 N8150-343 N8150-260 N8150-284 NOTE: All hard drives within a RAID array should be of the same capacity. 4.2.5 3.5-inch Drive with RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required Raid Controller (512MB, RAID0/1/5/6) Promise SuperTrak EX8760T-512 RAID 0/1/5/6/10/50, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T Internal SAS/SATA Cable 1x mini-SAS to 4x fixed SAS 3.5-inch HDD cage 4 x 3.5-inch non hot plug (fixed) hard drive bays 160GB HDD 1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm 3TB HDD 1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm N8103-134 RAID BBU Recommended Cable Required HDD Cage HDD 4 slots available N8103-141 K410-252(00) (Standard) N8150-372 N8150-373 N8150-343 N8150-260 N8150-284 N8150-339 NOTE: All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 2.1, January 2012 12 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 4.2.6 2.5-inch Drive with On-board SATA Controller Category Product Name / Description Part Number Storage Controller On-board SATA Controller 4 x SATA ports, RAID 0/1/10 capable Internal SATA Cable 1x SATA to 1x SATA, 4 sets 2.5-inch HDD cage 4 x 2.5-inch non hot plug (fixed) hard drive bays 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 (Standard) Cable HDD Cage Required HDD 4 slots available SATA SSD (Standard) N8154-38 N8150-316 N8150-317 N8150-335 N8150-708 NOTE On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID controller is required to configure RAID array for other operating systems. Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.. All hard drives within a RAID array should be of the same capacity. 4.2.7 2.5-inch Drive with RAID 0/1 Controller with 128 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (128MB, RAID 0/1) Promise SuperTrak TX8760T-128 RAID 0/1, 128MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T Internal SAS/SATA Cable 1x mini-SAS to 4x fixed SAS 2.5-inch HDD cage 4 x 2.5-inch non hot plug (fixed) hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-128 RAID BBU Recommended Cable Required HDD Cage Required HDD SAS 4 slots available SATA SSD N8103-141 K410-251(00) N8154-38 N8150-380 N8150-381 N8150-316 N8150-317 N8150-335 N8150-708 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 2.1, January 2012 13 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 4.2.8 2.5-inch Drive with RAID 0/1 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1x mini-SAS to 4x fixed SAS 2.5-inch HDD cage 4 x 2.5-inch non hot plug (fixed) hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-129 RAID BBU Recommended Cable Required HDD Cage Required HDD SAS 4 slots available SATA SSD N8103-121 K410-251(00) N8154-38 N8150-380 N8150-381 N8150-316 N8150-317 N8150-335 N8150-708 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 2.1, January 2012 14 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 4.2.9 2.5-inch Drive with RAID 5/6 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1/5/6) LSI MegaRAID SAS 9264-8i RAID 0/1/5/6/10/50, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1x mini-SAS to 4x fixed SAS 2.5-inch HDD cage 4 x 2.5-inch non hot plug (fixed) hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-130 RAID BBU Recommended Cable Required HDD Cage Required HDD SAS 4 slots available SATA SSD N8103-121 K410-251(00) N8154-38 N8150-380 N8150-381 N8150-316 N8150-317 N8150-335 N8150-708 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 2.1, January 2012 15 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 4.2.10 2.5-inch Drive with RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required Raid Controller (512MB, RAID0/1/5/6) Promise SuperTrak EX8760T-512 RAID 0/1/5/6/10/50, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T Internal SAS/SATA Cable 1x mini-SAS to 4x fixed SAS 2.5-inch HDD cage 4 x 2.5-inch non hot plug (fixed) hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-134 RAID BBU Recommended Cable Required HDD Cage Required HDD SAS 4 slots available SATA SSD N8103-141 K410-251(00) N8154-38 N8150-380 N8150-381 N8150-316 N8150-317 N8150-335 N8150-708 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. 5 Internal Optical Drive Available Bays: 1 Product Name / Description Part Number Slim DVD-ROM drive (Standard) Internal DVD Super Multi Drive Slim DVD Super Multi drive, not including writing software N8151-104F NOTE: To install internal DVD Super Multi drive, the standard DVD-ROM drive needs to be removed. NEC Corporation Revision 2.1, January 2012 16 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 6 Internal Tape / RDX Drives 6.1 Tape / RDX Drive Selection Refer to the section in accordance with your type of tape drives. DAT DAT72 USB Refer to 6.2.1 DAT160 USB Refer to 6.2.1 DAT320 USB Refer to 6.2.1 USB Refer to 6.2.2 LTO2 SAS Refer to 6.2.3 LTO3 SAS Refer to 6.2.3 LTO4 SAS Refer to 6.2.3 LTO5 SAS Refer to 6.2.4 RDX LTO NOTE: The same combination of a drive and host interface cannot be installed multiple times NEC Corporation Revision 2.1, January 2012 17 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 6.2 Tape / RDX Configuration 6.2.1 DAT / USB Category Product Name / Description Part Number Controller Internal USB Controller 1 x USB port or 1 x pin-header for front panel USB Internal USB Cable 1x Internal USB to 1x USB device Internal USB Cable 1x pin-header for front panel USB to 1x USB device and 1x front panel USB port NOTE: The cable is required to install internal flash memory and USB tape drive. A USB tape drive occupies one front USB port. (Standard) Internal DAT (USB) DDS3 / DDS4 / DAT72, Native capacity 36 GB NOTE: DDS1 / DDS2 format are not supported Internal DAT (USB) DDS4 / DAT72 / DAT160, Native capacity 80 GB NOTE: DDS1 / DDS2 /DDS3 format are not supported Internal DAT (USB) DAT160 / DAT 320, Native capacity 160 GB NOTE: DDS1 / DDS2 / DDS3 / DDS4 / DAT72 / WORM DAT160 format are not supported N8151-69 Category Product Name / Description Part Number Controller Internal USB Controller 1 x USB port or 1 x pin-header for front panel USB Internal USB Cable 1x Internal USB to 1x USB device Internal USB Cable 1x pin-header for front panel USB to 1x USB device and 1x front panel USB port NOTE: The cable is required to install internal flash memory and USB tape drive. A USB tape drive occupies one front USB port. (Standard) Internal RDX (USB) N8151-86 Cable Required Drive 2 bays available 6.2.2 K410-245(00) N8151-78 N8151-99 RDX Cable Required Drive 2 bays available NEC Corporation K410-254(00) Revision 2.1, January 2012 K410-254(00) K410-245(00) 18 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 6.2.3 LTO / SAS (1) Category Product Name / Description Part Number Controller Required SAS Controller LSI SAS3442E-R Host Bus Adapter 3Gbps SAS, Int. 4, Ext. 4, SFF-8484 / SFF8470, PCIe x8, LP/FH N8103-104A Cable Required Drive 2 bays available Internal SAS Cable 1x SFF-8484 SAS to 2x SFF-8482 SAS Internal LTO (SAS) LTO2, Native capacity 200 GB K410-173(00) Internal LTO (SAS) LTO3, Native capacity 400 GB N8151-102 Internal LTO (SAS) LTO4, Native capacity 800 GB N8151-90 6.2.4 N8151-59 LTO / SAS (2) Category Product Name / Description Part Number Controller Required SAS Controller LSI ISAS9212-4i4 Host Bus Adapter 6Gbps SAS, Int. 4, Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8, LP/FH Internal SAS Cable N8103-142 Cable Required Drive 2 bays available K410-217(00) 1x 7-pin Single SATA to 1x SFF-8482 SAS Internal LTO (SAS) N8151-103 LTO5, Native capacity 1.5 TB Internal LTO (SCSI) N8151-76 LTO3, Native capacity 400 GB 7 Internal Flash Memory Available socket: 1 Product Name / Description Part Number Internal Flash Memory Internal flash memory to enable software and tools in the EXPRESSBUILDR DVD without DVD media NOTE: Before use, software and tools must be copied from the EXPRESSBUILDER DVD to the flash memory. The following operations can be performed with the flash memory: - Installation of Windows server with express setup - Installation of Starter Pack—the package of NEC qualified drivers and system setting tools - Installation of NEC ESMPRO Agent and Universal RAID Utility - Performance of the Test and Diagnosis Tool N8115-05 NEC Corporation Revision 2.1, January 2012 19 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 8 PCI Card 8.1 LAN / SAS Controller Category Product Name / Description Part Number LAN 1000BASE-T Adapter (2ch) Broadcom NetXtreme II 5709 Dual port Network Interface Card PCIe x4, LP / FH NOTE: Teaming and bonding features across the standard LAN and the LAN controller are supported on Windows Server 2003R2 / 2008 / 2008R2 and Red Hat Linux 5.x Operating system. Up to 2 teams per system and 2 ports per team is supported in the teaming and bonding feature. N8104-134 SAS SAS Controller LSI SAS3442E-R Host Bus Adapter 3Gbps SAS, Int. 4 / Ext. 4, SFF-8484 / SFF8470, PCIe x8, LP/FH SAS Controller LSI ISAS9212-4i4 Host Bus Adapter 6Gbps SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8, LP / FH N8103-104A 8.2 N8103-142 Serial Port Adapter Product Name / Description Part Number Serial port adapter Serial port fixed to PCI bracket N8117-01A 9 Other Add-in Components 9.1 Input Devices Product Name / Description Part Number Keyboard and Mouse Pack (US) 1 x 104-keys White USB keyboard, 1 x USB White Optical Wheel Mouse (Standard) NEC Corporation Revision 2.1, January 2012 20 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 10 Add-on Components 10.1 Server Management License The server integrates the EXPRESSSCOPE Engine 3 as standard. Refer to Server Management for the standard management features. For more extensive remote KVM and remote media features, choose the following kit. Product Name / Description Part Number Remote KVM and Media License kit N8115-04 License for one server. Remote KVM and remote media are enabled regardless of OS status. Remote KVM: Displays a graphics console on the web browser of the remote terminal (PC/server). Controls keyboard and mouse via the remote terminals' web browser Remote media: Enables the user to use the CD / DVD / FD / Flash memory of the remote terminals (PC/server) as if accessing the local drives. 10.2 Rack Conversion Kit The following rack conversion kit is required to install the server into a 19-inch rack system: Product Name / Description Part Number Rack Conversion Kit Convert to 4U form factor N8143-75 10.3 Flash FDD Choose the Flash FDD if you need to prepare an alternative for a floppy drive. Product Name / Description Part Number Flash FDD USB flash emulating USB floppy disk, Native capacity 1.44 MB N8160-86 NEC Corporation Revision 2.1, January 2012 21 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d 10.4 Medium and Cartridge Category Product Name Drive supported Part Number RDX RDX Cartridge (320GB) N8151-86 N8152-26 RDX Cartridge (500GB) N8151-86 N8152-27 RDX Cartridge (1TB) N8151-86 N8152-33 DAT72(36GB) Medium 5 pack N8151-69 N8152-08 DAT NEC Corporation Revision 2.1, January 2012 22 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d References Note for Ordering Parts number provided may be needed to modify by country/region when you order the products. For example, the operable parts number for N8100-1738F in EMEA is N8100-1730F-O, adding "-O", the country-specific identifier for EMEA, after the parts number. Please consult our sales representative for your country identifier. Server Management The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system management features listed in the table below. Standard Hardware monitoring With Remote KVM and Media License kit Temperature/voltage/power/ fan /degeneration (memory/hard drive) Hardware event log collection Boot monitoring Booting, BIOS/POST stall, OS stall, shutdown Alerting HW error, Boot error and OS panic (by SNMP, E-Mail) Remote KVM POST/BIOS setup, DOS utility (via LAN) Panic screen, Boot screen Text-based screen (OS console) GUI-based screen (OS console) - Remote control Remote reset/power on-off/ dump (via LAN) Configure power capping setting Configure BIOS setting (items limited) OS shutdown Remote media (CD/DVD/FD) - Server Management Command Line Protocol (DMTF compliant) Remote control via Web browser (without dedicated app) Remote batch Scheduling (without UPS) Maintenance Save/restore BIOS/BMC setting to/from a dedicated flash memory Others Set automatic IP address via DNS/DHCP Remote wakeup Wake On LAN, Wake On Ring Centralized management Industry standard Monitoring and control of multiple servers IPMI 2.0 2.0 NEC Corporation Revision 2.1, January 2012 23 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d OS Support Matrix for PCI Cards VMware ESXi 5.0 RHEL 6 x64 RHEL 6 RHEL 5 x64 RHEL 5 WS 2003R2 x64 WS 2003R2 WS 2008 x64 WS 2008 WS 2008R2 Part Number Product Name N8103-128 RAID controller (128MB, RAID 0/1) - N8103-129 RAID controller (512MB, RAID 0/1/5/6) N8103-130 RAID controller (256MB, RAID 0/1) N8103-134 RAID controller (256MB, RAID 0/1/5/6) N8103-104A SAS Controller, 3 Gb/s - N8103-142 SAS Controller, 6 Gb/s - N8104-134 1000BASE-T Adapter - Supporting PCI Cards and Installable Slots Part Number Product Name Slots Remarks Slot # : #1 #2 #3 #4 PCI Slot: x4 x4 x16 32-bit Card height: FH Slot type: x8 x8 x16 5V Installable card length (mm) : 175 175 200 312 N8103-128 RAID controller (128MB, RAID 0/1) [PCIe 2.0 x8] - - - N8103-134 RAID controller (512MB, RAID 0/1/5/6) [PCIe 2.0 x8] - - - N8103-129 RAID controller (256MB, RAID 0/1) [PCIe 2.0 x8] - - - N8103-130 RAID controller (256MB, RAID 0/1/5/6) [PCIe 2.0 x8] - - - N8103-104A SAS controller [PCIe x8] - - N8103-142 SAS controller [PCIe 2.0 x8] - - N8104-134 1000BASE-T adapter(2ch) [PCIe x4] - N8117-01A Serial port adapter NEC Corporation Revision 2.1, January 2012 maximum 1 24 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d Copyright Notice and Liability Disclaimer The information contained herein is subject to change without notice. Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Linux is a trademark of Linus Torvalds. Red Hat is a registered trademark of Red Hat, Inc. in the U.S. All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less. NEC Corporation Revision 2.1, January 2012 25 CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d Revision History Revision Date Description February 13, 2012 Discontinued products removed: 160GB RDX Cartridge / N8152-20 640GB RDX Cartridge / N8152-30 Part number changed: 146.5GB SAS HDD / N8150-380 300GB SAS HDD / N8150-381 Others: Add RHEL6.1 and VMware ESXi 5.0 in the operating systems supported 2.1 January 11, 2012 New products added: Pentium G630 / N8101-527F Discontinued products removed: Pentium G620 / N8101-499F SCSI Controller / N8103-107 Part number changed: 160GB SATA HDD / N8150-372 250GB SATA HDD / N8150-373 500GB SATA HDD / N8150-343 Others: Correct incorrect information in internal drive configuration using 3TB 3.5-inch SATA drive 2.0 December 14, 2011 New products added: 3TB HDD / N8150-339 Discontinued products removed: 1GB Memory Kit / N8102-415F 1.2 August 17, 2011 Others: Correct incorrect product name and part number for storage controller and RAID BBU in section 4.2.3 Remove section for External Tape / RDX Drives Add the note for the on-board SATA controller 1.1 August 3, 2011 Others: Correct incorrect description for 8GB Memory Kit 1.0 July 28, 2011 Initial release NEC Corporation Revision 2.1, January 2012 26