NEC EXPRESS5800/T120b-M Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC EXPRESS5800 server. March 2012 Revision 4.4 NEC Corporation CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Contents TECHNICAL SPECIFICATION ........................................................................................ 3 Key Features .......................................................................................................................................... 3 Specification .......................................................................................................................................... 3 EXTERNAL VIEWS ......................................................................................................... 5 Front and Rear Views ........................................................................................................................... 5 Front View ........................................................................................................................................ 5 Dimensions (mm) .................................................................................................................................. 6 CONFIGURATION DIAGRAM ......................................................................................... 7 SERVER CONFIGURATION ........................................................................................... 8 1 2 3 Base Models ................................................................................................................................... 8 2nd Processor ................................................................................................................................ 8 Memory ........................................................................................................................................... 9 3.1 Memory Configuration ........................................................................................................... 9 4 Internal Hard Disk Drives ............................................................................................................ 12 4.1 RAID Configuration .............................................................................................................. 12 4.2 Internal Drive Configuration ................................................................................................. 14 5 Optical Drive ................................................................................................................................. 30 6 Internal Tape / RDX Drives .......................................................................................................... 31 6.1 Tape / RDX Drive Selection ................................................................................................. 31 6.2 Tape / RDX Configuration .................................................................................................... 32 7 PCI Card ........................................................................................................................................ 34 7.1 LAN Controller ..................................................................................................................... 34 7.2 External RAID Controller ..................................................................................................... 35 7.3 Fibre Channel / SAS Controller ........................................................................................... 35 8 Other Add-in Components .......................................................................................................... 36 8.1 Redundant Power Supply .................................................................................................... 36 8.2 Redundant Fan .................................................................................................................... 36 8.3 VMware ESXi Pre-install Kit ................................................................................................ 36 8.4 Input Devices ....................................................................................................................... 36 9 Add-on Components ................................................................................................................... 36 9.1 Server Management License............................................................................................... 36 9.2 Rack Conversion Kit ............................................................................................................ 37 9.3 Flash FDD............................................................................................................................ 37 9.4 Medium and Cartridge ......................................................................................................... 37 10 Support Service .......................................................................................................................... 37 10.1 Software ............................................................................................................................ 37 REFERENCES............................................................................................................... 38 Server Management ............................................................................................................................ 38 OS Support Matrix for PCI Cards ...................................................................................................... 39 Supporting PCI Cards and Installable Slots ..................................................................................... 40 Copyright Notice and Liability Disclaimer ........................................................................................ 41 REVISION HISTORY ..................................................................................................... 42 NEC Corporation Revision 4.4, March 2012 2 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Technical Specification Key Features High performance with the latest Intel® Xeon® processor 5600 series Up to 192 GB of high speed DDR3-1333 memory High energy efficiency with power capping feature and 80 PLUS® Silver power supply Full manageability by integrated EXPRESSSCOPE Engine 2 Specification Model T120b-M Part Number Processor N8100-1727F N8100-1728F N8100-1729F N8100-1730F Type Intel® Xeon® processor E5620 Intel® Xeon® processor E5645 Intel® Xeon® processor X5650 Intel® Xeon® processor X5675 Clock speed 2.40 GHz 2.40 GHz 2.66 GHz 3.06 GHz Number of Processors 1 or 2 Cache 12 MB Cores and Threads 4C-8T 6C-12T 6C-12T 6C-12T Chipset Memory Internal Storage Expansion Slots [free] Intel® 5520 Chipset Type DDR3-1333 and DDR3-1066 ECC Registered Low Power DIMM Standard Capacity 0 GB Maximum Capacity 192 GB (12 x 16 GB) Memory protection ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory Sparing Standard Capacity 0 GB Maximum Capacity 2.5-inch drive configuration: SAS : 14.4 TB (16 x 900 GB) SATA : 16 TB (16 x 1 TB) SSD : 1.6 TB ( 16 x 100 GB) 3.5-inch drive configuration: SATA : 24 TB (8 x 3 TB) Disk Controller SATA : 3Gb/s (Integrated) SAS: 6Gb/s (Optional) RAID SATA : RAID 0/1 (Standard), RAID 5/6/50 (Optional) SAS : RAID 0/1/5/6/10/50 (Optional) Hot Plug Supported Optical Disk Drive DVD-ROM 5-inch Media Bays [free] Disk Drive Bays [free] 3 [2] Standard Total: 6 slots available 4[4] x PCIe 2.0 x8 (x8 connector) 1[1] x PCIe x4 (x8 connector) 1[1] x 32-bit / 33 MHz 5V PCI Video Controller (VRAM) Interfaces NEC Corporation 1 2 2.5-inch drive configuration: 16 [16] 3.5-inch drive configuration: 8 [8] Integrated in Server Management Controller (32MB) 1 x Keyboard (6-pin mini DIN, 1 x rear) 1 x Mouse (6-pin mini DIN, 1 x rear) 1 x VGA (15-pin mini D-sub, 1 x rear) 2 x Serial (9-pin mini D-sub, RS232-C, 2 x rear) Revision 4.4, March 2012 3 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Model T120b-M Interfaces (Cont.) 8 x USB2.0 (2 x front, 2 x rear, 4 x internal) 2 x 1000BASE-T LAN connector (1000BASE-T / 100BASE-TX / 10BASE-T, RJ-45, 2 x rear) 1 x Management LAN connector (100BASE-TX / 10BASE-T, RJ-45, 1 x rear) Server Management EXPRESSSCOPE Engine 2 Redundant Fan Optional, hot plug Redundant Power Supply Optional, hot plug Power Supply 1-2 x 600 Watt 80 PLUS® Silver certified hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz Power Consumption (Max. Config, Idling) 302 VA / 299 Watt 303 VA / 300 Watt 305 VA / 302 Watt 306 VA / 303 Watt (Max. Config, Operating) 508 VA / 503 Watt 533 VA / 528 Watt 578 VA / 572 Watt 590 VA / 584 Watt Acoustical Noise Max. Config, Idling (Sound Pressure Max. Config, Operating 3 Level) Dimensions (W x D x H ) 41.5 dB Weight (Minimum / Maximum) 22 kg / 36 kg, 48.50 lbs. / 79.37 lbs. Temperature, Relative Humidity (non-condensing) Operating: 10° to 35° C / 50° to 95° F, 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% Regulatory and Safety FCC, CE, UL, CB, RoHS, WEEE Operating Systems Microsoft® Windows Server® 2003, Standard Edition (SP1 or later) Microsoft® Windows Server® 2003, Enterprise Edition (SP1 or later) Microsoft® Windows Server® 2003 R2, Standard Edition Microsoft® Windows Server® 2003 R2, Enterprise Edition Microsoft® Windows Server® 2003 R2, Standard x64 Edition Microsoft® Windows Server 2003 R2, Enterprise x64 Edition Microsoft® Windows Server® 2008 Standard Microsoft® Windows Server® 2008 Enterprise Microsoft® Windows Server® 2008 Standard (x64) Microsoft® Windows Server® 2008 Enterprise (x64) Microsoft® Windows Server® 2008 R2 Standard Microsoft® Windows Server® 2008 R2 Enterprise 4 Red Hat Enterprise Linux ES4.8 or later (x86) 4 Red Hat Enterprise Linux ES4.8 or later (EM64T) 4 Red Hat Enterprise Linux AS4.8 or later (x86) 4 Red Hat Enterprise Linux AS4.8 or later (EM64T) 4 Red Hat Enterprise Linux 5.4 or later (x86) 4 Red Hat Enterprise Linux 5.4 or later (EM64T) 4 Red Hat Enterprise Linux Advanced Platform5.4 or later (x86) 4 Red Hat Enterprise Linux Advanced Platform5.4 or later (EM64T) 4 Red Hat Enterprise Linux 6.0 or later (x86) 4 Red Hat Enterprise Linux 6.0 or later (x86_64) VMware ESXi 4.1 1 2 3 4 44.3 dB 220.0 x711.0 x 453.0 mm / 8.7 x 28.0 x 17.8 in (5U) On-board SATA RAID controller is supported only on Windows operating systems. On-board SATA Controller does not support RAID 10 configured with 2TB and 3TB HDDs. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: http://www.nec.com/global/prod/express/linux/index.html NEC Corporation Revision 4.4, March 2012 4 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M External Views Front and Rear Views Front View A J B C K D E F G H L J A B C D K E F G H I L I 2.5-inch Drive Configuration 3.5-inch Drive Configuration Legend A. Power Button G. Hard Drive Activity LED B. Data LAN 2 Activity LED H. Power LED C. Data LAN 1 Activity LED I. USB Connectors D. System Reset Switch J. 5-inch Media Bay E. Dump (NMI) Switch K. DVD-ROM Drive System Status LED L. Drive Cage Bays F. NEC Corporation Revision 4.4, March 2012 5 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Rear View A I B J C D E F G K H Legend A. Mouse Connector G. Data LAN Connectors B. Keyboard Connector H. PCI Slots C. Serial Port B Connector I. AC Inlet D. VGA Connector J. Additional PS Slot E. Management LAN Connector K. Serial Port A Connector F. USB Connectors Dimensions (mm) 736.0 711.0 220.0 453.0 317.0 NEC Corporation Revision 4.4, March 2012 6 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Configuration Diagram CHASSIS REAR Hot Plug Power Supply #1 Media Bay #1 Hot Plug Power Supply #2 CHASSIS FRONT Media Bay #2 Processor #2 PCIe 2.0 x8 (x8 socket) FH PCIe 2.0 x8 (x8 socket) FH/HL PCIe 2.0 x8 (x8 socket) FH/HL PCIe 2.0 x8 (x8 socket) FH/HL PCIe x4 (x8 socket) FH/HL PCI 32-bit/33MHz FH/FL Legend: NEC Corporation DIMM #7 DIMM #8 DIMM #9 DIMM #10 DIMM #11 DIMM #12 Cooling Fan #2 Processor #1 Cooling Fan #1 #1 #2 #3 #4 #5 #6 Cooling Fan #4 Cooling Fan #3 Cooling Fan #5 DIMM DIMM DIMM DIMM DIMM DIMM Minimum required components Revision 4.4, March 2012 Media Bay #3 (DVD-ROM) Drive Cage Bays #2 BBU slot #1 - #4 Drive Cage Bays #1 Standard components 7 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Server Configuration 1 Base Models Product Name / Description Part Number NEC EXPRESS5800/T120b-M Server (4C/E5620) no RAM, no Drive Cage, no HDD Including: 1 x Intel Xeon processor E5620, DVD-ROM drive, EXPRESSBUILDER DVD NEC EXPRESS5800/T120b-M Server (6C/E5645) no RAM, no Drive Cage, no HDD Including: 1 x Intel Xeon processor E5645, DVD-ROM drive, EXPRESSBUILDER DVD NEC EXPRESS5800/T120b-M Server (6C/X5650) no RAM, no Drive Cage, no HDD Including: 1 x Intel Xeon processor X5650, DVD-ROM drive, EXPRESSBUILDER DVD NEC EXPRESS5800/T120b-M Server (6C/X5675) no RAM, no Drive Cage, no HDD Including: 1 x Intel Xeon processor X5675, DVD-ROM drive, EXPRESSBUILDER DVD N8100-1727F N8100-1728F N8100-1729F N8100-1730F 2 2nd Processor Available sockets: 1 Product Name / Description Part Number CPU Kit (4C/E5620) Intel® Xeon® Processor E5620 (2.40 GHz / 4C-8T / 12 MB) CPU Kit (6C/E5645) Intel® Xeon® Processor E5645 (2.40 GHz / 6C-12T / 12 MB) CPU Kit (6C/X5650) Intel® Xeon® Processor X5650 (2.66 GHz / 6C-12T / 12 MB) CPU Kit (6C/X5675) Intel® Xeon® Processor X5675 (3.06 GHz / 6C-12T / 12 MB) N8101-472 N8101-495 N8101-496 N8101-497 NOTE: The 2nd processor must be the same with what is used in the base model NEC Corporation Revision 4.4, March 2012 8 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 3 Memory 3.1 Memory Configuration Refer to the section in accordance with your memory configuration: Independent channel / Memory Sparing Configuration: Refer to 3.1.1 Memory Mirroring / Memory Lockstep Configuration: Refer to 3.1.2 3.1.1 Independent Channel / Memory Sparing Configuration Available slots: 6 per processor Product Name / Description Part Number Additional 2GB Memory Module (1x 2GB) 2 GB (1 x 2 GB) DDR3-1333 ECC Registered Low Power DIMM Additional 4GB Memory Module (1x 4GB) 4 GB (1 x 4 GB) DDR3-1333 ECC Registered Low Power DIMM Additional 8GB Memory Module (1x 8GB) 8 GB (1 x 8 GB) DDR3-1333 ECC Registered Low Power DIMM Additional 16GB Memory Module (1x 16GB) 16 GB (1 x 16 GB) DDR3-1066 ECC Registered Low Power DIMM N8102-430 N8102-431 N8102-382 N8102-383 NOTE: Minimum one memory kit per processor must be installed. It is recommended to install two or three identical memory kits for dual-channel or triple-channel symmetric memory configurations to increase memory transfer speed. 3.1.2 Memory Mirroring / Memory Lockstep Configuration Available slots: 4 per processor Product Name / Description Part Number Additional 4GB Memory Module (2x 2GB) 4 GB (2 x 2 GB) DDR3-1333 ECC Registered Low Power DIMM Additional 8GB Memory Module (2x 4GB) 8 GB (2 x 4 GB) DDR3-1333 ECC Registered Low Power DIMM Additional 16GB Memory Module (2x 8GB) 16 GB (2 x 8 GB) DDR3-1333 ECC Registered Low Power DIMM Additional 32GB Memory Module (2x 16GB) 32 GB (2 x 16 GB) DDR3-1066 ECC Registered Low Power DIMM N8102-393 N8102-394 N8102-395 N8102-396 NOTE: Minimum one memory kit per processor must be installed. NEC Corporation Revision 4.4, March 2012 9 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Memory Configuration Feature Comparison See the table below for feature comparisons of memory configurations supported. Independent Channel Memory Sparing Memory Lockstep Memory Mirroring Performance Best Better Better Good Data Protection No Multiple single bit error protection No Multiple single bit and multi bit error protection Data Correction ECC, x4 SDDC ECC, x4 SDDC ECC, x8 SDDC ECC, x4 SDDC Redundancy No Partly No Fully Available Memory Full physical memory Physical memory excluding spare memory Full physical memory Half physical memory Available Memory Channels Notes 3 3 2 2 - All DIMMs in the system must be identical. Paired DIMMs must be identical. Paired DIMMs must be identical. Maximum Memory Speed See the table below for the actual maximum memory speed on your system. DDR3 memory speed depends on the type of DIMMs and the native memory bus speed of the memory controller. All memory buses operate at the clock frequency of the DIMM with the lowest frequency. Processor Type E5620 E5645 X5650 X5675 Memory Power Setting Populated DIMMs DIMM Speed 1 GB, 2 GB, 4 GB, 8 GB - - 1066 MHz 16GB Normal (1.5V) 1 1066 MHz 2 800 MHz Low (1.35V) - 800 MHz Normal (1.5V) - 1333 MHz Low (1.35V) 1 1333 MHz 2 1066 MHz 1 1066 MHz 2 800 MHz - 800 MHz 1 GB, 2 GB, 4 GB, 8 GB 16GB Normal (1.5V) Low (1.35V) NEC Corporation DIMMs per Channel Revision 4.4, March 2012 10 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Maximum Available Memory See the table below for the maximum memory size that you can actually use on your system. The maximum available memory is less than the maximum physical memory supported by your system because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary depending on the type and the number of PCI cards you are using. 1 Maximum Memory Size Supported by OS Maximum Available Memory 4 GB Microsoft Windows Server 2003, Standard Edition(SP1) Microsoft Windows Server 2003 R2, Standard Edition Microsoft Windows Server 2008 Standard 4 GB (HW-DEP enabled) App. 3.6 GB (HW-DEP disabled) 32 GB Microsoft Windows Server 2003 R2, Standard x64 Edition Microsoft Windows Server 2008 Standard (x64) Microsoft Windows Server 2008 R2 Standard (x64) 32 GB 64 GB Microsoft Windows Server 2003, Enterprise Edition(SP1) Microsoft Windows Server 2003 R2, Enterprise Edition Microsoft Windows Server 2008 Enterprise 64 GB 1 TB Microsoft Windows Server 2003 R2, Enterprise x64 Edition 192 GB 2 TB Microsoft Windows Server 2008 Enterprise (x64) Microsoft Windows Server 2008 R2 Enterprise (x64) 192 GB 16 GB Red Hat Enterprise Linux ES4 Red Hat Enterprise Linux ES4 (EM64T) Red Hat Enterprise Linux 5 Red Hat Enterprise Linux 5 Advanced Platform Red Hat Enterprise Linux 6 16 GB 64 GB Red Hat Enterprise Linux AS4 64 GB 256 GB Red Hat Enterprise Linux AS4 (EM64T) Red Hat Enterprise Linux 5 (EM64T) Red Hat Enterprise Linux 5 Advanced Platform (EM64T) 192 GB 2 TB Red Hat Enterprise Linux 6.0 (x86_64) 192 GB 256 GB 1 or 1TB VMware ESXi 4.1 192 GB Up to 255 GB of the main memory is available to each virtual machine. NEC Corporation Revision 4.4, March 2012 11 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4 Internal Hard Disk Drives 4.1 RAID Configuration Refer to the section in accordance with your disk form factor and RAID configuration. 4.1.1 Up to four 2.5-inch Drives Available Disk Refer to 4.2.1 SATA, SSD 256MB Cache Refer to 4.2.2 SAS, SATA, SSD 256MB Cache Refer to 4.2.3 SAS, SATA, SSD 512MB Cache Refer to 4.2.4 SAS, SATA, SSD Non-RAID On-board SATA RAID RAID 0/1 Optional RAID Controller RAID 5/6 NOTE: On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID controller is required to configure RAID array for other operating systems. Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.. All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. An optional RAID controller occupies one PCI slot. 4.1.2 Up to eight 2.5-inch Drives Available Disk RAID 0/1/10 256MB Cache Refer to 4.2.5 SAS, SATA, SSD RAID 5/6 256MB Cache Refer to 4.2.6 SAS, SATA SSD 512MB Cache Refer to 4.2.7 SAS, SATA SSD NOTE: An optional RAID controller occupies one PCI slot. All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 4.4, March 2012 12 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.1.3 Up to twelve 2.5-inch Drives Available Disk RAID 0/1/10 256MB Cache Refer to 4.2.8 SAS, SATA, SSD RAID 5/6 256MB Cache Refer to 4.2.9 SAS, SATA, SSD 512MB Cache Refer to 4.2.10 SAS, SATA, SSD NOTE: An optional RAID controller occupies one PCI slot. All hard drives within a RAID array should be of the same capacity and rotation speed. SAS and SATA hard drives must be installed in separate HDD Cages. 4.1.4 Up to sixteen 2.5-inch Drives Available Disk RAID 0/1/10 256MB Cache Refer to 4.2.11 SAS, SATA, SSD RAID 5/6 256MB Cache Refer to 4.2.12 SAS, SATA, SSD 512MB Cache Refer to 4.2.13 SAS, SATA, SSD NOTE: An optional RAID controller occupies one PCI slot. All hard drives within a RAID array should be of the same capacity and rotation speed. SAS and SATA hard drives must be installed in separate HDD Cages. 4.1.5 Up to four 3.5-inch Drives Available Disk Refer to 4.2.14 SATA 256MB Cache Refer to 4.2.15 SATA 256MB Cache Refer to 4.2.16 SATA 512MB Cache Refer to 4.2.17 SATA Non-RAID On-board SATA RAID RAID 0/1/10 Optional RAID Controller RAID 5/6 NOTE: On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID controller is required to configure RAID array for other operating systems. On-board SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs. Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.. All hard drives within a RAID array should be of the same capacity. An optional RAID controller occupies one PCI slot. NEC Corporation Revision 4.4, March 2012 13 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.1.6 Up to eight 3.5-inch Drives Available Disk RAID 0/1/10 256MB Cache Refer to 4.2.18 SATA RAID 5/6 256MB Cache Refer to 4.2.19 SATA 512MB Cache Refer to 4.2.20 SATA NOTE: An optional RAID controller occupies one PCI slot. All hard drives within a RAID array should be of the same capacity. 4.2 Internal Drive Configuration 4.2.1 2.5-inch Drive with On-board SATA Controller Category Product Name / Description Part Number Storage Controller On-board SATA Controller 4 x SATA ports, RAID 0/1/10 capable Internal SATA Cable 4 x Single SATA to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 (Standard) Cable Required HDD Cage Required HDD 4 slots available SATA SSD K410-232(00) N8154-24 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID controller is required to configure RAID array for other operating systems. Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.. All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 4.4, March 2012 14 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.2 Up to four 2.5-inch Drives with RAID 0/1Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-129 RAID BBU Recommended Cable Required HDD Cage Required HDD SAS 4 slots available SATA SSD N8103-124 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 4.4, March 2012 15 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.3 Up to four 2.5-inch Drives with RAID 5/6 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1/5/6) LSI MegaRAID SAS 9264-8i RAID 0/1/5/6, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-130 RAID BBU Recommended Cable Required HDD Cage Required HDD SAS 4 slots available SATA SSD N8103-124 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 4.4, March 2012 16 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.4 Up to four 2.5-inch Drives with RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID0/1/5/6) Promise SuperTrak EX8760T-512 RAID 0/1/5/6, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T and EX8768 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-134 RAID BBU Recommended Cable Required HDD Cage Required HDD SAS 4 slots available SATA SSD N8103-136 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 4.4, March 2012 17 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.5 Up to eight 2.5-inch Drives with RAID 0/1 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-129 RAID BBU Recommended Cable 2 sets required HDD Cage Required HDD SAS 8 slots available SATA SSD N8103-124 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 4.4, March 2012 18 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.6 Up to eight 2.5-inch Drives with RAID 5/6 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1/5/6) LSI MegaRAID SAS 9264-8i RAID 0/1/5/6, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-130 RAID BBU Recommended Cable 2 sets required HDD Cage Required HDD SAS 8 slots available SATA SSD N8103-124 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 4.4, March 2012 19 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.7 Up to eight 2.5-inch Drives with RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID0/1/5/6) Promise SuperTrak EX8760T-512 RAID 0/1/5/6, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T and EX8768 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-134 RAID BBU Recommended Cable 2 sets required HDD Cage Required HDD SAS 8 slots available SATA SSD N8103-136 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. Mixing SAS and SATA hard drives in the same system is not supported. NEC Corporation Revision 4.4, March 2012 20 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.8 Up to twelve 2.5-inch Drives with RAID 0/1 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller 2 sets required RAID Controller (256MB, RAID 0/1) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-129 RAID BBU 2 sets recommended Cable 3 sets required HDD Cage 2 sets required HDD SAS 12 slots available SATA SSD N8103-124 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. SAS and SATA hard drives must be installed in separate HDD Cages. NEC Corporation Revision 4.4, March 2012 21 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.9 Up to twelve 2.5-inch Drives with RAID 5/6 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller 2 sets required RAID Controller (256MB, RAID 0/1/5/6) LSI MegaRAID SAS 9264-8i RAID 0/1/5/6, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-130 RAID BBU 2 sets recommended Cable 3 sets required HDD Cage 2 sets required HDD SAS 12 slots available SATA SSD N8103-124 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. SAS and SATA hard drives must be installed in separate HDD Cages. NEC Corporation Revision 4.4, March 2012 22 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.10 Up to twelve 2.5-inch Drives with RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller 2 sets required RAID Controller (512MB, RAID0/1/5/6) Promise SuperTrak EX8760T-512 RAID 0/1/5/6, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T and EX8768 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-134 RAID BBU 2 sets recommended Cable 3 sets required HDD Cage 2 sets required HDD SAS 12 slots available SATA SSD N8103-136 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. SAS and SATA hard drives must be installed in separate HDD Cages. NEC Corporation Revision 4.4, March 2012 23 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.11 Up to sixteen 2.5-inch Drives with RAID 0/1 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller 2 sets required RAID Controller (256MB, RAID 0/1) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-129 RAID BBU 2 sets recommended Cable 4 sets required HDD Cage 2 sets required HDD SAS 16 slots available SATA SSD N8103-124 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. SAS and SATA hard drives must be installed in separate HDD Cages. NEC Corporation Revision 4.4, March 2012 24 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.12 Up to sixteen 2.5-inch Drives with RAID 5/6 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller 2 sets required RAID Controller (256MB, RAID 0/1/5/6) LSI MegaRAID SAS 9264-8i RAID 0/1/5/6, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-130 RAID BBU 2 sets recommended Cable 4 sets required HDD Cage 2 sets required HDD SAS 16 slots available SATA SSD N8103-124 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. SAS and SATA hard drives must be installed in separate HDD Cages. NEC Corporation Revision 4.4, March 2012 25 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.13 Up to sixteen 2.5-inch Drives with RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller 2 sets required RAID Controller (512MB, RAID0/1/5/6) Promise SuperTrak EX8760T-512 RAID 0/1/5/6, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T and EX8768 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 2.5-inch HDD Cage 8 x 2.5-inch hot plug hard drive bays 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 300GB HDD 1 x 300 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 450GB HDD 1 x 450 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 600GB HDD 1 x 600 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 900GB HDD 1 x 900 GB, 2.5-inch, SAS 6Gb/s, 10,000 rpm 73.2GB HDD 1 x 73.2 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 146.5GB HDD 1 x 146.5 GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 300GB HDD 1 x 300GB, 2.5-inch, SAS 6Gb/s, 15,000 rpm 160GB HDD 1 x 160 GB, 2.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 2.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 2.5-inch, SATA2, 7,200 rpm 100GB SSD 1 x 100 GB, 2.5-inch, SATA2 N8103-134 RAID BBU 2 sets recommended Cable 4 sets required HDD Cage 2 sets required HDD SAS 16 slots available SATA SSD N8103-136 K410-174(00) N8154-24 N8150-374 N8150-375 N8150-376 N8150-377 N8150-332 N8150-378 N8150-379 N8150-331 N8150-276 N8150-277 N8150-334 N8150-707 NOTE: All hard drives within a RAID array should be of the same capacity and rotation speed. SAS and SATA hard drives must be installed in separate HDD Cages. NEC Corporation Revision 4.4, March 2012 26 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.14 Up to four 3.5-inch Drives with On-board SATA Controller Category Product Name / Description Part Number Storage Controller On-board SATA Controller 4 x SATA ports, RAID 0/1/10 capable Internal SATA Cable 4 x Single SATA to 1 x mini-SAS 3.5-inch HDD Cage 4 x 3.5-inch hot plug hard drive bays 160GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm (Standard) Cable Required HDD Cage Required HDD 4 slots available K410-232(00) N8154-25 N8150-386 N8150-387 N8150-388 N8150-263 N8150-278 NOTE: On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID controller is required to configure RAID array for other operating systems. On-board SATA RAID Controller does not support RAID 10 configured with 2TB HDDs. Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.. All hard drives within a RAID array should be of the same capacity. 4.2.15 Up to four 3.5-inch Drives with RAID 0/1 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 3.5-inch HDD Cage 4 x 3.5-inch hot plug hard drive bays 160GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm N8103-129 RAID BBU Recommended Cable Required HDD Cage Required HDD 4 slots available N8103-124 K410-174(00) N8154-25 N8150-386 N8150-387 N8150-388 N8150-263 N8150-278 NOTE: All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 4.4, March 2012 27 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.16 Up to four 3.5-inch Drives with RAID 5/6 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1/5/6) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 3.5-inch HDD Cage 4 x 3.5-inch hot plug hard drive bays 160GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm N8103-130 RAID BBU Recommended Cable Required HDD Cage Required HDD 4 slots available N8103-124 K410-174(00) N8154-25 N8150-386 N8150-387 N8150-388 N8150-263 N8150-278 NOTE: All hard drives within a RAID array should be of the same capacity. 4.2.17 Up to four 3.5-inch Drives with RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID0/1/5/6) Promise SuperTrak EX8760T-512 RAID 0/1/5/6, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T and EX8768 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 3.5-inch HDD Cage 4 x 3.5-inch hot plug hard drive bays 160GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm 3TB HDD 1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm N8103-134 RAID BBU Recommended Cable Required HDD Cage Required HDD 4 slots available N8103-136 K410-174(00) N8154-25 N8150-386 N8150-387 N8150-388 N8150-263 N8150-278 N8150-337 NOTE: All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 4.4, March 2012 28 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.18 Up to eight 3.5-inch Drives with RAID 0/1 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 3.5-inch HDD Cage 4 x 3.5-inch hot plug hard drive bays 160GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm N8103-129 RAID BBU Recommended Cable 2 sets required HDD Cage 2 sets required HDD 8 slots available N8103-124 K410-174(00) N8154-25 N8150-386 N8150-387 N8150-388 N8150-263 N8150-278 NOTE: All hard drives within a RAID array should be of the same capacity. 4.2.19 Up to eight 3.5-inch Drives with RAID 5/6 Controller with 256 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (256MB, RAID 0/1/5/6) LSI MegaRAID SAS 9264-8i RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for LSI MegaRAID SAS 9264 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 3.5-inch HDD Cage 4 x 3.5-inch hot plug hard drive bays 160GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm N8103-130 RAID BBU Recommended Cable 2 sets required HDD Cage 2 sets required HDD 8 slots available N8103-124 K410-174(00) N8154-25 N8150-386 N8150-387 N8150-388 N8150-263 N8150-278 NOTE: All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 4.4, March 2012 29 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 4.2.20 Up to eight 3.5-inch Drives with RAID 5-6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID0/1/5/6) Promise SuperTrak EX8760T-512 RAID 0/1/5/6, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T and EX8768 Internal SAS/SATA Cable 1 x mini-SAS to 1 x mini-SAS 3.5-inch HDD Cage 4 x 3.5-inch hot plug hard drive bays 160GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 250GB HDD 1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm 500GB HDD 1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm 1TB HDD 1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm 2TB HDD 1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm 3TB HDD 1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm N8103-134 RAID BBU Recommended Cable 2 sets required HDD Cage 2 sets required HDD 8 slots available N8103-136 K410-174(00) N8154-25 N8150-386 N8150-387 N8150-388 N8150-263 N8150-278 N8150-337 NOTE: All hard drives within a RAID array should be of the same capacity. 5 Optical Drive Category Product Name / Description Part Number Internal 1 slot available Internal DVD-ROM drive DVD-ROM drive (Standard) NEC Corporation Revision 4.4, March 2012 30 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 6 Internal Tape / RDX Drives 6.1 Tape / RDX Drive Selection Refer to the section in accordance with your type of tape drives. DAT DAT72 USB Refer to 6.2.1 DAT160 USB Refer to 6.2.1 DAT320 USB Refer to 6.2.1 USB Refer to 6.2.2 LTO2 SAS Refer to 6.2.3 LTO3 SAS Refer to 6.2.3 LTO4 SAS Refer to 6.2.3 LTO5 SAS Refer to 6.2.4 RDX LTO NOTE: The same combination of drive type and host interface cannot be installed multiple times. Tape devices cannot be directly connected to VMware ESXi servers. For an ESXi environment, it is recommended to connect and configure an additional backup server via network. NEC Corporation Revision 4.4, March 2012 31 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 6.2 Tape / RDX Configuration 6.2.1 DAT / USB Category Product Name / Description Part Number Controller Internal USB Controller 1 x USB port Internal USB cable 1 x Internal USB to 1 x USB device NOTE: The cable is provided for each tape drive. (Standard) Internal DAT (USB) DDS3 / DDS4 / DAT72, Native capacity 36 GB NOTE: DDS1 / DDS2 format are not supported. N8151-69 Internal DAT (USB) DDS4 / DAT72 / DAT160, Native capacity 80 GB NOTE: DDS1 / DDS2 / DDS3 format are not supported. N8151-78 Internal DAT (USB) DAT160 / DAT 320, Native capacity 160 GB NOTE: DDS1 / DDS2 / DDS3 / DDS4 / DAT72 / DAT160 for WORM format are not supported. N8151-99 Category Product Name / Description Part Number Controller Internal USB Controller 1 x USB port Internal USB cable 1 x Internal USB to 1 x USB device NOTE: The cable is provided for each tape drive. (Standard) Internal RDX (USB) N8151-86 Cable Drive 2 bays available 6.2.2 RDX Cable Drive 2 bays available NEC Corporation (Standard) Revision 4.4, March 2012 (Standard) 32 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 6.2.3 LTO / SAS (1) Category Product Name / Description Part Number Controller Required SAS Controller LSI SAS3442E-R Host Bus Adapter 3Gbps SAS, Int. 4, Ext. 4, SFF-8484 / SFF8470, PCIe x8, LP/FH N8103-104A Cable Required Drive 2 bays available Internal SAS Cable 1x SFF-8484 SAS to 2x SFF-8482 SAS Internal LTO (SAS) LTO2, Half height, Native capacity 200 GB Internal LTO (SAS) LTO3, Half height, Native capacity 400 GB Internal LTO (SAS) LTO4, Half height, Native capacity 800 GB Internal LTO (SAS) LTO4, Full height, Native capacity 800 GB K410-173(00) 6.2.4 N8151-101 N8151-102 N8151-90 N8151-77 LTO / SAS (2) Category Product Name / Description Part Number Controller Required SAS Controller LSI ISAS9212-4i4 Host Bus Adapter 6Gbps SAS, Int. 4, Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8, LP/FH Internal SAS Cable N8103-142 Cable Required Drive 2 bays available NEC Corporation K410-217(00) 1x 7-pin Single SATA to 1x SFF-8482 SAS Internal LTO (SAS) N8151-103 LTO5, Half height, Native capacity 1.5 TB Revision 4.4, March 2012 33 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 7 PCI Card 7.1 LAN Controller Category GbE PCIe PCI-X 10GbE Ctrlr Module Converged Network Product Name / Description Part Number 1000BASE-T Adapter Intel® PRO/1000 PT Server Adapter PCIe x1, LP / FH 1000BASE-T Adapter (2ch) Intel® PRO/1000 PT Dual Port Server Adapter PCIe x4, FH 1000BASE-T Adapter (4ch) Intel® PRO/1000 PT Quad Port Server Adapter PCIe x4, LP / FH NOTE: Network cables with RJ-45 plug covers cannot be used. N8104-126 1000BASE-T Adapter Intel® PRO/1000 MT Server Adapter 64bit / 133 MHz PCI-X, FH 10GBASE-SR Adapter Chelsio S310E-SR 10GbE Storage Accelerator PCIe x8, LP / FH 10GBASE Adapter (SFP+/2ch) Broadcom NetXtreme II BCM957711 10G SFP+ Dual Port Network Interface Card PCIe 2.0 x8, LP / FH NOTE: - N8104-129 SFP+ Module is required to connect with an optical cable. - Up to 2 SFP+ Modules can be installed. - On Windows Server 2003R2 /2008 / 2008R2 and Red Hat Linux 5.x(EM64T) and 6.x(x86_64) operating systems, teaming and bonding features across one or two identical adapters are supported. A team can include up to two ports and up to two teams per system are allowed. - On Red Hat Linux 5.x(x86) and 6.x(x86) operating systems, bonding features within one adapter with up to two ports are supported. One team per system is allowed. N8104-119 SFP+ Module (10G-SR) 1 x SFP+ Module for N8104-128 Dual Port 10Gb Converged Network Adapter BROCADE 1020 Dual Port 10Gbps Converged Network Adapter PCIe 2.0 x8, LP / FH, 2 x SFP module N8104-129 N8104-121 N8104-125A N8104-123A N8104-128 N8104-131 NOTE: Teaming and bonding features across the standard LAN and optional PCIe based GbE LAN controller (excluding N8104-126) are supported on Windows Server 2003R2 /2008 / 2008R2 and Red Hat Linux 5.x operating systems. Up to two 10GbE LAN controllers can be installed. When installing a 10GBASE-SR Adapter, no other additional 10GbE LAN controllers is allowed. Teaming feature is not supported on iSCSI interfaces. NEC Corporation Revision 4.4, March 2012 34 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 7.2 External RAID Controller Category Product Name / Description Part Number Controller RAID Controller (512MB, RAID0/1/5/6) Promise SuperTrak EX8768 RAID 0/1/5/6, 512MB, Ext. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s, LP / FH RAID Battery Backup Unit for Promise SuperTrak EX8760T and EX8768 N8103-135 RAID BBU 7.3 N8103-136 Fibre Channel / SAS Controller Category Product Name / Description Part Number Fibre Channel Fibre Channel Controller (1ch) Emulex LightPulse LPe1250-F8 Host Bus Adapter 8Gb/s, Optical, PCIe 2.0 x8, LP / FH Fibre Channel Controller (2ch) Emulex LightPulse LPe12002-M8 Host Bus Adapter 8Gb/s, Optical, PCIe 2.0 x8, LP / FH Fibre Channel Controller (1ch) Emulex LightPulse LPe1150-F4 Host Bus Adapter 4Gb/s, Optical, PCIe x4, LP / FH Fibre Channel Controller (2ch) Emulex LightPulse LPe11002-M4 Host Bus Adapter 4Gb/s, Optical, PCIe 2.0 x4, LP / FH SAS Controller LSI SAS3442E-R Host Bus Adapter 3Gb/s SAS, Int. 4 / Ext. 4, SFF-8484 / SFF8470, PCIe x8, LP / FH SAS Controller LSI SAS9212-4i4 Host Bus Adapter 6Gb/s SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8, LP / FH N8190-153 SAS NEC Corporation Revision 4.4, March 2012 N8190-154 N8190-127 N8190-131 N8103-104A N8103-142 35 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 8 Other Add-in Components 8.1 Redundant Power Supply Product Name / Description Part Number Power Unit 1 x 600 Watt 80 PLUS® Silver certified Hot plug Power Supply N8181-72AF 8.2 Redundant Fan Product Name / Description Part Number Redundant Fan Hot plug Cooling Fan for T120b-M N8181-66 8.3 VMware ESXi Pre-install Kit Product Name / Description Part Number VMware ESXi 4.1 Base Kit Including USB flash memory, VMware ESXi 4.1 Recovery CD NOTE: - The Base Kit may not be available in some regions. Please contact our sales representative to confirm if it is available in your country. - The Base Kit must be ordered with the base model. - Installation of VMware ESXi onto hard drives is not supported. N8106-004F 8.4 Input Devices Product Name / Description Part Number Keyboard and Mouse Pack (US) 1 x 104-keys White PS/2 keyboard, 1 x PS/2 White Optical Wheel Mouse (Standard) 9 Add-on Components 9.1 Server Management License The server integrates the EXPRESSSCOPE Engine 2 as standard. Refer to Server Management for the standard management features. For more extensive remote KVM and remote media features, choose the following kit. Product Name / Description Part Number Remote KVM and Media License Kit N8115-03 License for one server. Remote KVM and remote media are enabled regardless of OS status. Remote KVM: Displays a graphics console on the web browser of the remote terminal (PC/server). Controls keyboard and mouse via the remote terminals' web browser Remote media: Enables the user to use the CD / DVD / FD / Flash memory of the remote terminals (PC/server) as if accessing the local drives. NOTE: Remote KVM and remote media features are not available for virtual machines. NEC Corporation Revision 4.4, March 2012 36 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M 9.2 Rack Conversion Kit The following rack conversion kit is required to install the server into a 19-inch rack system: Product Name / Description Part Number Rack Conversion Kit Convert to 5U form factor N8143-72 9.3 Flash FDD Choose the Flash FDD if you need to prepare an alternative for a floppy drive. Product Name / Description Part Number Flash FDD USB flash emulating USB floppy disk, Native capacity 1.44 MB N8160-86 9.4 Medium and Cartridge Category Product Name Drive supported Part Number RDX RDX Cartridge (320GB) N8151-86 N8152-26 RDX Cartridge (500GB) N8151-86 N8152-27 RDX Cartridge (1TB) N8151-86 N8152-33 DAT72(36GB) Medium 5 pack N8151-69 N8152-08 DAT 10 Support Service 10.1 Software Product Name / Description Part Number PP Support Pack (VMware ESXi 4.1 for 1 processor)(1year) Technical Support Service regarding ESXi (for quick solutions to technical issues) NOTE: It is necessary to purchase a PP support pack for each processor installed in the system. ULH1S-SV40-008F NEC Corporation Revision 4.4, March 2012 37 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M References Server Management The EXPRESSSCOPE Engine 2, integrated into the server, provides superior remote control and system management features listed in the table below. Standard Hardware monitoring Temperature/voltage/power/ fan /degeneration (memory/hard drive) Hardware event log collection With Remote KVM and Media License Kit 1 Boot monitoring Booting, BIOS/POST stall, OS stall, shutdown Alerting HW error, Boot error and OS panic (by SNMP, E-Mail) Remote KVM POST/BIOS setup, DOS utility 2 2 Text-based screen (OS console) 2 (via LAN) Panic screen, Boot screen 1 GUI-based screen (OS console) - Remote control Remote reset/power on-off/ dump (via LAN) OS shutdown Remote media (CD/DVD/FD) - Server Management Command Line Protocol (DMTF compliant) Remote control via Web browser (without dedicated app) Remote batch 1 1 Scheduling (without UPS) 2 2 Others Set automatic IP address via DNS/DHCP Remote wakeup Wake On LAN, Wake On Ring Centralized management 1 2 Monitoring and control of multiple servers 1 1 1 1 The feature is not supported on VMware systems. The serial port B is not available for the feature. NEC Corporation Revision 4.4, March 2012 38 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M OS Support Matrix for PCI Cards ESXi 4.1 RHEL 4 x64 RHEL 4 RHEL 5 x64 RHEL 5 RHEL 6 x64 RHEL 6 WS 2003 WS 2003R2 x64 WS 2003R2 WS 2008 x64 WS 2008 WS 2008R2 Part Number Product Name N8103-129 RAID Controller N8103-130 RAID Controller N8103-134 RAID Controller - N8103-135 RAID Controller N8103-104A SAS Controller, 3 Gb/s - - - N8103-142 SAS Controller, 6 Gb/s - - - N8190-127 Fibre Channel Controller - - N8190-131 Fibre Channel Controller (2ch) - - N8190-153 Fibre Channel Controller - - - - N8190-154 Fibre Channel Controller (2ch) - - - - N8104-119 1000BASE-T Adapter - N8104-126 1000BASE-T Adapter N8104-121 1000BASE-T Adapter (2ch) N8104-125A 1000BASE-T Adapter (4ch) N8104-123A 10GBASE-SR Adapter - N8104-128 10GBASE Adapter (SFP+/2ch) - - N8104-131 Dual Port 10Gb Converged Network Adapter - - NEC Corporation - - - - - Revision 4.4, March 2012 - - - - - - - - - - - - - - - - 39 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Supporting PCI Cards and Installable Slots Part Number Product Name Slots Remarks Slot # : #1 #2 #3 #4 #5 #6 PCI Slot: x8 x8 x8 x8 x4 32-bit Card height: FH FH FH FH FH FH Slot type: x8 x8 x8 x8 x8 5V Installable card length (mm) : 150 300 300 300 300 312 N8103-129 RAID Controller (256MB, RAID 0/1) [PCIe 2.0 x8] - - - - N8103-130 RAID Controller (256MB, RAID 0/1/5/6) [PCIe 2.0 x8] - - - - N8103-134 RAID Controller (512MB,RAID 0/1/5/6) [PCIe 2.0 x8] - - - - N8103-135 RAID Controller (512MB,RAID 0/1/5/6) [PCIe 2.0 x8] - - - N8103-104A SAS Controller [PCIe x8] - - - N8103-142 SAS Controller [PCIe 2.0 x8] - - - N8190-127 Fibre Channel Controller [PCIe x4] - - - N8190-131 Fibre Channel Controller (2ch) [PCIe x4] - - - N8190-153 Fibre Channel Controller [PCIe 2.0 x8] - - - N8190-154 Fibre Channel Controller (2ch) [PCIe 2.0 x8] - - - N8104-119 1000BASE-T Adapter [64-bit / 133 MHz PCI-X] - - - - - N8104-126 1000BASE-T adapter [PCIe x1] - Max. 3 N8104-121 1000BASE-T Adapter (2ch) [PCIe x4] - Max. 2 N8104-125A 1000BASE-T Adapter (4ch) [PCIe x4] - - - N8104-123A 10GBASE-SR Adapter [PCIe x8] - - - Max. 2 N8104-128 10GBASE adapter (SFP+/2ch) [PCIe 2.0 x8] - - - Max. 2 N8104-131 Dual Port 10Gb Converged Network Adapter [PCIe 2.0 x8] - - - NEC Corporation Revision 4.4, March 2012 Max. 2 40 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Copyright Notice and Liability Disclaimer The information contained herein is subject to change without notice. Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Linux is a trademark of Linus Torvalds. Red Hat is a registered trademark of Red Hat, Inc. in the U.S. All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less. NEC Corporation Revision 4.4, March 2012 41 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Revision History Revision Date Description 4.4 March 1, 2012 4.3 February 13, 2012 New products added: 2GB Memory Kit / N8102-430 4GB Memory Kit / N8102-431 Discontinued products removed: 1GB Memory Kit / N8102-379 2GB Memory Kit / N8102-380 4GB Memory Kit / N8102-381 2GB Memory Kit / N8102-392 Discontinued products removed: 160GB RDX Cartridge / N8152-20 640GB RDX Cartridge / N8152-30 Part number changed: 146.5GB 2.5-inch SAS HDD / N8150-374 300GB 2.5-inch SAS HDD / N8150-375 450GB 2.5-inch SAS HDD / N8150-376 600GB 2.5-inch SAS HDD / N8150-377 4.2 January 23, 2012 Part number changed: 73.2GB 2.5-inch SAS HDD / N8150-378 146.5GB 2.5-inch SAS HDD / N8150-379 4.1 January 12, 2012 Discontinued products removed: SCSI Controller / N8103-107 100BASE-SX Adapter / N8104-112 Part number changed: 160GB SATA HDD / N8150-386 250GB SATA HDD / N8150-387 500GB SATA HDD / N8150-388 Others: Correct incorrect information in internal drive configuration using 3TB 3.5-inch SATA drive 4.0 December 14, 2011 New products added: 3TB 3.5-inch SATA HDD / N8150-337 2GB Memory Kit / N8102-430 4GB Memory Kit / N8102-431 Discontinued products removed: 1GB Memory Kit / N8102-379 2GB Memory Kit / N8102-380 2GB Memory Kit / N8102-392 4GB Memory Kit / N8102-381 3.2 October 18, 2011 Other: Correct incorrect information in Specification, 1 Base Models, Maximum Available Memory, 8.4 Input Devices, and References. 3.1 September 1, 2011 Other: Correct incorrect chart for Up to four 3.5-inch Drives. Add the remark in section for server management Correct incorrect part numbers for RAID BBU in section 4.2.11 to 4.2.13 3.0 July 29, 2011 New products added: 300GB 15K 2.5-inch SAS HDD / N8150-331 900GB 10K 2.5-inch SAS HDD / N8150-332 Discontinued products removed: 100BASE-TX Adapter / N8104-111 SCSI Controller / N8103-75 NEC Corporation Revision 4.4, March 2012 42 CONFIGURATION GUIDE – NEC EXPRESS5800/T120b-M Revision Date Description 2.0 April 8, 2011 New products added: 1TB 7.2K 2.5-inch SATA HDD / N8150-334 1.0 February 14, 2011 Initial release NEC Corporation Revision 4.4, March 2012 43