Plastic Packages for Integrated Circuits Package Outline Drawing L36.6x6A 36 LEAD QUAD FLAT NO-LEAD PLASTIC PACKAGE Rev 1, 9/09 4X 4.0 6.00 36X 0.50 A B 28 6 PIN 1 INDEX AREA 36 27 6 PIN #1 INDEX AREA 6.00 1 4 .10 ± 0.10 9 19 (4X) 0.15 10 18 TOP VIEW 36X 0.60 ± 0.10 36X 0.25 4 0.10 M C A B BOTTOM VIEW 0.10 C MAX 0.90 0.08 C ( 5. 60 TYP ) ( C ( 36 X 0 . 50 ) SIDE VIEW 4. 10 ) C 0 . 2 REF 5 (36X 0.25 ) 0 . 00 MIN. 0 . 05 MAX. ( 36X 0.80 ) DETAIL "X" TYPICAL RECOMMENDED LAND PATTERN NOTES: 1. Dimensions are in millimeters. Dimensions in ( ) for Reference Only. 2. Dimensioning and tolerancing conform to AMSE Y14.5m-1994. 3. Unless otherwise specified, tolerance : Decimal ± 0.05 4. Dimension b applies to the metallized terminal and is measured between 0.15mm and 0.30mm from the terminal tip. 5. Tiebar shown (if present) is a non-functional feature. 6. The configuration of the pin #1 identifier is optional, but must be located within the zone indicated. The pin #1 indentifier may be 7. Compliant to JEDEC MO-220VJJD. either a mold or mark feature. 1