JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 75SA-085 SWITCH ASSEMBLY Frequency Range DC-1450 MHz Configuration 2 individually controlled 1P2T failsafe selfterminating electro-mechanical RF switches (Port 1 is failsafe position) Enclosure Type Benchtop Startup/Default States (configurable) RF switches to port J1 at startup (see SWITCH command) DHCP enabled (see NET command) 4 Ethernet users (see NET command) Prompts off (see PROMPT command) All of these default settings can be changed by user. Unit can be configured for up to 12 Ethernet users. Impedance 50 Ohms nominal VSWR 1.4:1 maximum 1.6:1 maximum DC-500 MHz 500-1450 MHz 1.15:1 typical @ 500 MHz 1.30:1 typical @ 1450 MHz Insertion Loss 0.6 dB maximum 0.3 dB typical Isolation 50 dB minimum 45 dB minimum RF Input Power +20 dBm Switching Speed 10 milliseconds (after command is received and processed) (3 milliseconds typical processing time) Manual Control 20-Button Keypad and LCD display (IP Address configurable via keypad) (Net mask configurable via keypad) (Gateway configurable via keypad) (Baud rate configurable via keypad) Remote Control Ethernet (DHCP, TCP/IP, 10/100, up to 12 users) RS-232 (up to 115200 Baud) DC-500 MHz 500-1450 MHz --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 75SA-085 SWITCH ASSEMBLY Remote Commands RF Switch Control Commands: Switch, Set Switch, Read Switch, Set All Switches, Read All Switches System Commands: Help, Identification, Store, Recall, Pause, Net, Serial, Close, Disconnect, MOTD, Date, Message, Restrict, IDENT, Name, Show Users, Reboot, Uptime, Prompt AC Supply 100-240 VAC @ 47-63 Hz RF Connector BNC, F or TNC female Operating Temperature Range 0ºC to +50ºC Physical Size See outline drawing 092-8107 ECR/ECN # DATE REV 09/30/2014 24239 Page 2 of 2 08/06/2015 APPR / DATE ECR/ECN # TRS 09/30/2014 A TRS 08/06/2015 JFW FORM E-7-F REV F DATE REV APPR / DATE