Technical Data Accessory Safety switch Series SHS3 Description Article number SHS3-Scharnier 6019390038 270° 0° 180° 90° FR1 FR2 FA swivel range: 0° bis 270° Mechanical Data Hinge Ambient temperature Mechanical life Switching frequency Mounting G-X22CrNi17 -25°C to +70°C 106 operations Max. 300 swiveling movements/h 4 x M6 screws DIN EN ISO 7984 On flat and stiff ground Weight ≈ 0,27 kg Mounting position Any Mechanical load FR1= max. 1200 N ( for direction of loaded forces see the illustration below ) FR2= max. 500 N FA = max. 1200 N Notes The safety guard shall always be mounted using two SHS3 at least! See max. load. If the risk assessment of the machine permits a single-channel monitoring a blank hinge can used as bearing element. The connecting cable shall be protected against mechanical damages. The installation of the connecting cable can be done via pipes or cable ducts. The manufacturer / supplier of the machine / equipment is obliged to take the applicable standards for the calculation of the safety distances of separating safety guards to hazardous areas into account. Especially these standards apply: EN 294, EN 349, EN 953, EN 1088, ... . This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 07.04.2006 / Page 1 of 1 Document : 6019390038_en / Last update: 2 / 2316-06 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein-ag.de Vorlage : 0850174285 Orig. 2