Technical Data Rope pull switch Series SRM - ASI Description Article number ASI SRM-LU-175 6073200009 Operating symbol Operating diagram Latch Latch ON OFF Tolerance: Operating point ± 0,5 mm Actuating force ± 15 % Electrical data Operating voltage Operating current AS-i Specifications AS-i Inputs Parameter bits AS-i Address U I 26,5 … 31,6 V; via AS-interface, reverse-polarity proof < 30 mA Profile S-0.B IO-Code: 0x0 ID-Code: 0xB ID-Code1: 0xF ID-Code2: 0xE Contact 1: Date bits D0/D1 = static 00 or dynamic code transmission Contact 2: Date bits D2/D3 = static 00 or dynamic code transmission no function preset address: 0 This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 15.06.2011 / Page 1 of 2 Document: 6073200009_en / Last update: 1 / 2366-11 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica, Germany / www.bernstein.eu Vorlage : 0850174284 Orig. 2 Technical Data Rope pull switch Mechanical data Enclosure Cover Indication Actuator Emergency Stop Ambient air temperature Contact type Latching device Reset facility Mechanical life Rope length Rope ∅ Switching frequency Assembly Connection Plug connection Weight Installation position Protection type Al-die cast Al-die cast LEDs for slave and bus state Pull eye (Zn-die cast) PA, glass fibre reinforced -25° C ... +70° C (no freezing over/ no condensation) 2 NC (slow-action, Zb) acc. to IEC 60947-5-5, DIN EN 60947-5-5, ISO 13850 (DIN EN 418) pull of the emergency stop acc. to IEC/EN 60947-5-5 acc. to IEC 60947-5-5 max. 1 x 105 switching cycles ≤ 37,5 m (depends on the max. temperature variation) D = ∅ 2 - 5 mm ≤ 20/min. 4 х М6 oder 4 x M5 Plug connector M12 male 1: AS-i + 2: free 3: AS-i 4: free ≈ 0,48 kg operator definable IP67 acc. to IEC/EN 60529 Standards VDE 0660 T100, DIN EN 60947-1, IEC 60947-1 VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1 VDE 0660 T210, DIN EN 60947-5-5, IEC 60947-5-5 ISO 13850 EN 50295, EN ISO 13849-1 EU Conformity acc. to EMC Directive Safety Classification according 13849-1 to PL e MTTFd = high PFD = 2,49 * 10-10 Notes The degree of protection (IP code) specified applies solely to a property closed cover and the use of an equivalent cable gland with adequate cable. Maintenance-free installation. Rope with accessories is available on demand. This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications subject to change without notice! Date of issue: 15.06.2011 / Page 2 of 2 Document: 6073200009_en / Last update: 1 / 2366-11 Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica, Germany / www.bernstein.eu Vorlage : 0850174284 Orig. 2