VS-VSKDU300/06PbF Datasheet

VS-VSKDU300/06PbF
www.vishay.com
Vishay Semiconductors
Ultrafast Diodes, 300 A
(INT-A-PAK Power Modules)
FEATURES
• Electrically insulated by DBC ceramic
• 3500 VRMS isolating voltage
• Standard JEDEC® package
• Simplified mechanical designs, rapid assembly
• High surge capability
• Large creepage distances
• UL approved file E78996
• Case style INT-A-PAK
INT-A-PAK
• Designed and qualified for industrial level
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRODUCT SUMMARY

IF(AV) at TC
300 A at 48 °C
Type
Modules - Diode, High Voltage
Package
INT-A-PAK
Circuit
Two diodes doubler circuit
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Cathode to anode voltage
VR
Continuous forward current per leg
IF
Single pulse forward current
Maximum power dissipation per leg
Operating junction and storage
temperature range
RMS insulation voltage
IFSM
PD
TEST CONDITIONS
UNITS
600
V
TC = 25 °C
435
TC = 100 °C
230
Limited by junction temperature
TBD
TC = 25 °C
781
TC = 100 °C
313
TJ, TStg
VINS
VALUES
A
W
-40 to 150
°C
3500
V
50 Hz, circuit to base, 
all terminals shorted, t = 1 s
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
Cathode to anode breakdown voltage
SYMBOL
VBR
Forward voltage drop per leg
VFM
Maximum reverse leakage current
IRM
TEST CONDITIONS
IR = 500 μA
MIN.
TYP.
MAX.
600
-
-
IF = 150 A
-
1.23
1.53
IF = 300 A
-
1.43
1.96
IF = 150 A, TJ = 125 °C
-
1.11
1.29
IF = 300 A, TJ = 125 °C
-
1.39
1.73
TJ = 150 °C, VR = 600 V
-
-
50
UNITS
V
m
Revision: 11-Apr-14
Document Number: 94549
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKDU300/06PbF
www.vishay.com
Vishay Semiconductors
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
Reverse recovery time
trr
Peak recovery current
Irr
Reverse recovery charge
Qrr
Peak rate of recovery current
TYP.
MAX.
-
130
165
TJ = 125 °C
-
195
260
-
11
18
-
20
30
-
670
1485
TJ = 125 °C
-
1800
3900
TJ = 125 °C
-
-
400
TJ = 25 °C
s
MIN.
TJ = 25 °C
IF = 50 A
dI/dt = 200 A/μs
VR = 400 V (per leg)
TJ = 125 °C
dI(rec)M/dt
Softness factor per leg
TEST CONDITIONS
TJ = 25 °C
IF = 50 A, TJ = 25 °C, dI/dt = 400 A/μs, VR = 200 V
-
0.2
-
IF = 50 A, TJ = 125 °C, dI/dt = 400 A/μs, VR = 200 V
-
0.22
-
UNITS
ns
A
nC
A/μs
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
-40 to 150
°C
Maximum junction operating
and storage temperature range
TJ, TStg
Maximum thermal resistance,
junction to case per leg
RthJC
DC operation
0.16
Typical thermal resistance,
case to heatsink
RthCS
Mounting surface, flat, smooth and greased
0.05
K/W
to heatsink
Mounting
torque ± 10 %
A mounting compound is recommended and the
torque should be rechecked after a period of
3 hours to allow the spread of the compound.
busbar
4 to 6
Nm
200
g
7.1
oz.
Approximate weight
INT-A-PAK
100
1000
IR - Reverse Current (mA)
IF - Instantaneous Forward Current (A)
Case style
TJ = 150 °C
100
TJ = 25 °C
10
1
0
94549_01
0.5
1.0
1.5
2.0
2.5
3.0
3.5
VFM - Forward Voltage Drop (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
TJ = 150 °C
10
1
0.1
0.01
0.001
100
94549_02
TJ = 25 °C
200
300
400
500
600
VR - Reverse Voltage (V)
Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage
Revision: 11-Apr-14
Document Number: 94549
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKDU300/06PbF
www.vishay.com
Vishay Semiconductors
Allowable Case Temperature (°C)
160
140
120
100
DC
80
60
40
Square wave (D = 0.50)
20
0
0
100
200
300
400
500
IF(AV) - Average Forward Current (A)
94549_03
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Maximum Allowable Case Temperature vs. Average Forward Current
1
0.1
0.01
Single pulse
(thermal resistance)
0.001
0.00001
0.0001
0.001
D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
0.01
0.1
1
10
t1 - Rectangular Pulse Duration (s)
94549_04
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
1000
900
VR = 400 V
700
RMS limit
600
500
trr (ns)
Average Power Loss (W)
800
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
DC
400
300
200
100
IF = 50 A, TJ = 25 °C
100
0
0
94549_05
100
200
300
400
10
100
500
IF(AV) - Average Forward Current (A)
Fig. 5 - Forward Power Loss Characteristics
94549_06
1000
dIF/dt (A/μs)
Fig. 6 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg)
Revision: 11-Apr-14
Document Number: 94549
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-VSKDU300/06PbF
www.vishay.com
Vishay Semiconductors
100
10 000
VR = 400 V
Irr (A)
Qrr (nC)
VR = 400 V
1000
10
IF = 50 A, TJ = 25 °C
IF = 50 A, TJ = 25 °C
100
100
94549_07
1
100
1000
dIF/dt (A/μs)
1000
dIF/dt (A/μs)
94549_08
Fig. 7 - Typical Reverse Recovery Charge vs. dIF/dt (Per Leg)
Fig. 8 - Typical Reverse Recovery Current vs. dIF/dt (Per Leg)
ORDERING INFORMATION TABLE
Device code
VS-VS KD
1
2
U
300
06
PbF
3
4
5
6
1
-
Vishay Semiconductors product
2
-
Circuit configuration:
3
-
U = Ultrafast diode
4
-
Current rating (300 = 300 A)
5
-
Voltage rating (06 = 600 V)
6
-
PbF = Lead (Pb)-free
CIRCUIT CONFIGURATION
(1)
~
+
(2)
(3)
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95254
Revision: 11-Apr-14
Document Number: 94549
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
INT-A-PAK DBC
28 (1.10)
9 (0.33)
30 (1.18)
DIMENSIONS in millimeters (inches)
Ø 6.5 (Ø 0.25)
80 (3.15)
23 (0.91)
7
6
5
4
14.5
23 (0.91)
(0.57)
35 (1.38)
17 (0.67)
1
2
3
66 (2.60)
37 (1.44)
3 screws M6 x 10
94 (3.70)
Document Number: 95254
Revision: 11-Dec-07
For technical questions, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000