Schnitt A-A / A 13,72 3,1 1,5 6,3 Nietmutter / #4-40 M3 oder/ or 0,3 12,5 6,3 -0,3 6,4 threaded bolt : 7,3 0,2 4,75 A 10,8 Gewindebolzen / cross section A-A riveted nut : 3,1 #4-40 0,3 M3 oder/ or 27,5 7,3 0,3 2 39,1 3,7 3,75 11,8 15 134274 134271 Rohrniet / 134274 Nietmutter mit Klemmteil clamping thread: rivet : 3,3 A1 Information: 3WK3 Class : 207=0.8µm (30 µin) Au CONTACT, TIN/LEAD TERMINAL ERNI Accessory : Sonderausführung / Leiterplattenlochbild 134100 / - Refer to table on page 2 Special : Refer to table on page 2 Board hole pattern 134100 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Logo : M3 Angled solder Terminal Length : Type : 7,3 Refer to table on page 2 Terminal Type : Anforderungsstufe / Zubehör / 0,2 No. of contacts : Anschlußlänge / Aufdruck / 33,3 Refer to table on page 2 Part No. : Anschlußart / Bauart / -0,2 7,3 A2 Polzahl / A3 Ident-Nr. / 24,7 8 -0,2 3,1 5,8 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date TMC-S 3WK3-LP07-3 TMC-S 3WK3-LP07-3 www.ERNI.com Index Designation M:00022944.SZN 054985 TMCS I Ordering Information D-Sub Connector High Power Solder Right Angle Female Number of Pins 3WK3 Accessory Termination Side: Rivet nut M3 134470 Accessory Termination Side: Rivet nut #4-40 134471 www.erni.com