DRA1 CX Series • 10mm Single Channel DIN Rail Mount SSR Assembly • AC Ratings up to 280 VAC and 5 Amps • 90-140VAC control • Cage style screw terminals for easy connection • Fits standard 35mm DIN rail • Includes LED Status indicator PRODUCT SELECTION Description 90-140 Vrms Control 5A 5A DRA1-CX240A5 DRA1-CX240A5R OUTPUT SPECIFICATIONS (1) Description DRA1-CX240A5(R) Operating Voltage [VAC] Transient Overvoltage [Vpk] Maximum Load Current [Arms] (2) Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum off-state dv/dt @ maximum rated voltage [V/µsec] (3) Maximum 1 Cycle Surge Current (50/60 Hz) [Apk] Maximum I²t for fusing (50/60 Hz, 1/2 cycle) [A² sec] Maximum On-State Voltage Drop @ Rated Current [Vpk] 12-280 600 5 0.06 0.1 500 239/250 285/260 1.4 INPUT SPECIFICATIONS (1) Description DRA1-CX240A5(R) Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typycal Input Current Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [µsec] 90-140 Vrms 90 Vrms 10 Vrms 10 mA 14.1K Ohm 10 40 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Parameters 4000 VRMS 109 Ohms 10 pF -30 to 80°C -30 to 125 °C 0.063 lb (28.6g) Themally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) See Derating chart on page 3. 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 MECHANICAL SPECIFICATIONS WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116950 (relay only) LR81689 (relay only) 70938 UG (relay only) Rv. 110911 ANNEX - ENVIROMENTAL INFORMATION